Part# B1SC88

EMPs PTO Switch that is interchangeable and used on several other brands of ZTR mower models. Switch uses a push & pull, snap in mount with no tools required to change.

• 2 Position with 8 Terminals
• Replaces Badboy OEM# 056-8058-00
• Replaces Bush Hog OEM# 50018299
• Replaces Excel & Hustler OEM# 776476
• Replaces Ferris/ OEM# 1722887, 1722887SM, 5022180, 5022180SM
• Replaces Husqvarna & Dixon OEM# 532174651, 532154963, 582107601, 539129512
• Replaces Scag OEM# 481687, 483162, 483957
• Replaces Worldlawn OEM# 4807005, 523031
• Replaces Wright Mfg OEM# 52420003

Part# 33-002

Oregon PTO Switch used on several brands of ZTR mowers. Push/Pull Switch that snaps in. 2 Position with 8 Terminals.

• Replaces Ariens OEM# 00522100
• Replaces Bobcat OEM# 2188153
• Replaces Exmark/Toro OEM# 1-633673, 103-5221, 93-9998, 93-9999, 95-4108, 95-7489
• Replaces Grasshopper OEM# 183925
• Replaces Cub Cadet OEM# 725-1716, 925-1716
  
• Replaces John Deere OEM# AM116235, AM118802, AM119139, AUC10632, TCA17834, TCA21027, GY20939
• Replaces Kubota OEM# K1211-62231, K1211-62230
• Replaces Scag OEM# 481635
• Replaces Snapper OEM# 7028542, 7028542YP
• Replaces Woods OEM# 072262

Part # 925-04175A

Genuine OEM Cub Cadet PTO Switch used on LT1042, LT1045, LT1046, LT1050, GT1554, GT2542, GT2544, GT2550, GT2554, SLT1550, SLT1554, RZT42 and Z-Force models.

• "Push/Pull" snap-in switch
• 2 Position with 7 Terminals
• Superseding Cub Cadet OEM## 925-04258, 725-04175A

Part# X0104

Xtreme PTO Clutch Mid Mount models: 218, 220, 223, 225, 227, 321D, 322D, 325, 325A, 325D, 327A, 327EFI, 329, 400, 428D, 430D and 432. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Grasshopper OEM# 388740
• ID: 1-1/8"
• Pulley OD: 6-1/4"
• Rot Direction: Clockwise

Part# X0141

Xtreme PTO Clutch used on various Exmark Quest and Toro TimeCutter models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Exmark/Toro OEM# 117-7468
• ID: 1"
• Pulley OD: 5-3/8"
• Rot Direction: Counter Clockwise

Part# X0366

Xtreme PTO Clutch used on various Wright Mfg Stander and Sentar Sport models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Verify part number by referring to model specifications.

• Replaces Wright Mfg OEM# 71410014
• Replaces Warner OEM# 5219-54
• ID: 1"
• Pulley OD: 7-3/16"
• Rot Direction: Counter Clockwise
• 1/2" or 5/8" belt will work

Part# X0222

Xtreme PTO Clutch used on early Hustler Z & Mini Z models and BigDog Diablo & X Series models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Verify part number by referring to model specifications.

• Replaces Hustler/BigDog OEM# 601311, 601311K
• ID: 1-1/8"
• Pulley OD: 6-5/16"
• Rot Direction: Clockwise
• 1/2" or 5/8" belt will work

Part# X0244

Xtreme PTO Clutch used on various Bad Boy models: CZT Commercial Series; Lightning 5200, 6000 and 7200; Outlaw 5400, 6100 and 7200; Outlaw Extreme Series; Outlaw XP Series; Pup 4800, 5000, 5200, 6000 and 7200; and ZT Series. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Verify part number by referring to model specifications.

• Replaces Bad Boy OEM# 070-1000-00
• ID: 1-1/8"
• Pulley OD: 6-5/16"
• Rot Direction: Counter Clockwise
• 1/2" or 5/8" belt will work

Part# X0239

Xtreme PTO Clutch used on (way to many to list) Exmark Lazer Z E-Series, S-Series, X-Series models. Also used on various Toro Z Master models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Exmark/Toro OEM# 109-9282, 116-1604, 116-1620
• Replaces Warner OEM# 5218-207
• ID: 1-1/8"
• Pulley OD: 7-3/16"
• Rot Direction: Counter Clockwise

Part# X0921

Xtreme PTO Clutch used on various Hustler Raptor & Raptor Limited. Also on various BigDog Alpha & Rex MP models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Hustler/BigDog OEM# 605827K
• Replaces Warner OEM# 5219-194
• ID: 1-1/8"
• Pulley OD: 5-3/4"
• Rot Direction: Counter Clockwise
  
• 1/2" or 5/8" belt will work

Part# X0382

Xtreme PTO Clutch used on Gravely PM34M and PM44M models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to
model number specifications.

• Replaces Gravely OEM# 00867200
• Replaces Warner OEM# 5219-86
• ID: 1-1/8"
• Pulley OD: 6-5/16"
• Rot Direction: Counter Clockwise
  
• 1/2" or 5/8" belt will work

Part# X0936

Xtreme PTO Clutch used on various Scag 3 Wheel Rider and Walk-behind models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Scag OEM# 461073, 461397
• ID: 1"
• Pulley OD: 6-1/8"
• Rot Direction: Clockwise

Part# X0605

Xtreme PTO Clutch used on Scag V Ride and V Ride II Series. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Scag OEM# 462166
• ID: 1-1/8"
• Pulley OD: 6-1/16"
• Rot Direction: Counter Clockwise
  
• 1/2" or 5/8" belt will work

Part# X0922

Xtreme PTO Clutch used on various Hustler Raptor SD & SDX models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Hustler/BigDog OEM# 605777K
• Replaces Warner OEM# 5219-191
• ID: 1-1/8"
• Pulley OD: 6-1/8"
• Rot Direction: Counter Clockwise

Part# X0272

Xtreme PTO Clutch used on 48"/54"/60" Hustler FasTrak SD (Produced after S/N 1011 First 4 Digits) models. Also used on BigDog R Diablo, Stout MP (942599, 942607, 942615) models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Verify part number by referring to model specifications.

• Replaces Hustler OEM# 603273K
• Replaces BigDog OEM# 601785K
• ID: 1-1/8"
• Pulley OD: 6-5/16"
• Rot Direction: Clockwise
• 1/2" or 5/8" belt will work

Part# X0118

Xtreme PTO Clutch used on various Wright Mfg Stander WSLP Stand FD, WSTX Stand X and WSPX Sport models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a
replaceable pulley bearing. Verify part number by referring to model specifications.

• Replaces Wright Mfg OEM# 71410020
• ID: 1"
• Pulley OD: 7-1/4"
• Rot Direction: Clockwise
• 1/2" or 5/8" belt will work

Part# X0392

Xtreme PTO Clutch used on Hustler ATZ, Diesel Z & RD Diesel Z, Super Z HD & RD Super Z HD models. Also used on 60"/72" BigDog Diablo MP models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing.

• Replaces Hustler/BigDog OEM# 601278, 601278K
• ID: 1-1/8"
• Pulley OD: 7-3/16"

Part# 5219-45

Warner PTO Clutch used on various Gravely GR Pro-Gear, HE & HR Pro-Hydro Commercial Walk-behind Series and various ZT & PM ZTR series. These MagStop clutch/brakes combine an electric friction clutch with a permanent magnetic brake into a one piece, preassembled unit for quick installation. These units are maintenance-free and require no adjustment.

• Replaces Gravely OEM# 00191700
• ID: 1"
• Pulley OD: 6"
• Rot Direction: Counter Clockwise

Part# X0660

Xtreme PTO Clutch used on various Scag Tiger Cat, Tiger Cub and Wildcat models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Verify part number by referring to model specifications

• Replaces Scag OEM# 461660
• ID: 1-1/8"
• Pulley OD: 6"
• Rot Direction: Clockwise
• 1/2" or 5/8" belt will work

Part# X0380

Xtreme PTO Clutch used on various Gravely PM144M XDZ, PM148M XDZ, PM152M XDZ and PM160M models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Gravely OEM# 00605200
• ID: 1-1/8"
• Pulley OD: 6-5/16"
• Rot Direction: Counter Clockwise
  
• 1/2" or 5/8" belt will work

Part# X0659

Xtreme PTO Clutch used on various Scag Tiger Cub & Turf Tiger models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Does not fit all applications - Verify part number by referring to model specifications.

• Replaces Scag OEM# 461398, 461527, 461592, 461715
• ID: 1"
• Pulley OD: 6-1/16"
• Rot Direction: Clockwise
• 1/2" or 5/8" belt will work

Part# X0938

Xtreme PTO Clutch used on various Exmark Turf Tracer S Series models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing.

• Replaces Exmark OEM## 126-2615
• ID: 1-1/8"
• Pulley OD: 5"
• Rot Direction: Counter Clock
  
• 1/2" or 5/8" belt will work

Part# X0604

Xtreme PTO Clutch used on various Scag Z-Cat models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing.

• Replaces Scag OEM# 461772
• ID: 1-1/8"
• Pulley OD: 6"
• Rot Direction: Clockwise

Part# X0925

Xtreme PTO Clutch used on John Deere Commercial Walk-Behind models: WG32A, WG36A, WG48A, WH36A, WH48A, WH52A, WH61A, WHP36A, WHP48A, WHP52A and WHP61A. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces John Deere OEM# TCA20484
• ID: 1"
• Pulley OD: 5-15/16"
• Rot Direction: Counter Clockwise

Part# X0516

Xtreme PTO Clutch used on 61" Wright Mfg ZTO models: WZTO6130BSE and WZTO6149T8E-49S. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Verify part number by referring to model specifications.

• Replaces Wright Mfg OEM# 71410026
• ID: 1-1/8"
• Pulley OD: 7-1/8"
• Rot Direction: Counter Clockwise
• 1/2" or 5/8" belt will work

Part# X0236

Xtreme PTO Clutch used on various Wright Mfg Stander WSZK Series, Stander ZK Series and Z Series models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Verify part number by referring to model specifications.

• Replaces Wright Mfg OEM# 71410017, 71410018
• Replaces Warner OEM# 5218-203
• ID: 1-1/8"
• Pulley OD: 7-1/4"
• Rot Direction: Clockwise
• 1/2" or 5/8" belt will work

Part# X0920

Xtreme PTO Clutch used on various Exmark Turf Tracer X Series models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Exmark OEM# 126-2601
• Replaces Warner OEM# 5218-348
• ID: 1-1/8"
• Pulley OD: 7-1/4"
• Rot Direction: Counter Clockwise

Part# X0610

Xtreme PTO Clutch used on various Gravely Pro-Turn 148, Pro-Turn 152, Pro-Turn 160, PM148i, PM152i, PM160i and ProMaster Z Series models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Gravely OEM# 03785000
• ID: 1-1/8"
• Pulley OD: 6-1/16"
• Rot Direction: Counter Clockwise
  
• 1/2" or 5/8" belt will work

Part# X0915

Xtreme PTO Clutch used on John Deere 48"/54" Z915B & Z915E ZTrak models and 54" Z925M (S/N - to 030000) EFI Flex Fuel ZTrak models. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces John Deere OEM# TCA24445
• Replaces Warner OEM# 5219-179
• ID: 1-1/8"
• Pulley OD: 7-1/4"
• Rot Direction: Counter Clockwise

Part# X0368

Xtreme PTO Clutch used on TimeCutter Z480, ZX480 and ZX525, Serial No. 250000001-260999999; and XL440H, 2005-2010. Xtreme PTO Clutches offer Cool Coil technology with High temperature bearing upgrade and a replaceable pulley bearing. Upgraded to a 3 layer "Xtreme Tough" integrated, water tight wiring harness. Verify part number by referring to model number specifications.

• Replaces Gravely OEM# 02999900
• Replaces Warner OEM# 5219-93
  
• ID: 1-1/8"
• Pulley OD: 6-5/16"
• Rot Direction: Counter Clockwise