QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
14" Oregon Gator G3 Mulching Blade used on Toro 40" Grandstand models with Turbo Force decks. Superior mulching means fewer bag stops, cleaner side discharge and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results. It’s not a replacement, it’s an upgrade. Replaces Toro OEM# 108-4081, 108-4081-03, 108-4089-03, 108-4110-03, 108-4111-03, 108-4112-03, 114-4961, 114-4962, 114-4963, 114-4964, 114-4965Length: 14"Width: 2.50"Thickness: .250"Center Hole: 5/8"(May NOT fit all models- Check product description for exact OEM Part # match)
14-1/2" Oregon Gator G3 Mulching Blade used on older Dixon 42" models. Increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.
14-1/2" Oregon Gator G6 Heavy Duty Mulching Blade for 42" Dixie Chopper models. Also can be used on Bad Boy 42" Outlaw models, along with Ariens/Gravely 42" decks. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
15" Oregon Gator G3 Mulching Blade for 44" Grasshopper Front Mount Deck models. Also used on Country Clipper 42" & 44" decks on Boss, Charger, JaZee, SR1025, SR375 and Trek Hydro mower models. Also used on Woods 44" decks on 1250, 1850, 1855, 2855, 5120, 5140, 5180, 5182, 5200, 5210, 5215, 5250, 6170, D14414T, D4414, D4414-3 mower models.
15" Oregon High Lift HD Blade used on 44" Grasshopper models. Also used on various 48" Front and Mid Mount Deck Grasshopper models. Also used on early Country Clipper and Woods models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
15" Oregon Low Lift Heavy Duty Blade used on 44" Grasshopper models. Also used on various 48" Front and Mid Mount Deck Grasshopper models. Also used on early Country Clipper and Woods models. Oregon has 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly and delivers a clean cut for quality results.
15" XHT Medium Lift Heavy Duty Blade for 44" Ferris IS500Z and IS1500Z mower models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard OEM lawnmower blades. Benefits of using the XHT blade are sharper and longer lasting cutting edges. Along with more resistance to bending, XHT blades offer greater impact.
15" Predator Series Heavy Duty Mulching Blade for 44" Ferris IS500Z & IS1500Z Series models. Also used on 44" Simplicity ZT4000 Series models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
15-1/2" Oregon High Lift Blade for various 44" Toro SFS decks on models 117, 120 Groundsmaster, TimeCutter ZX, XL440H Tractors, and Proline Pistol Grip Hydro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
15-1/2" Predator Series Mulching Blade used on various Toro 44" decks such as TimeCutter Z, TimeCutter ZX440, Proline Walk-behind w/ SFS Side Discharge, Pro Lawn Tractor, Z149 Z Master and Groundsmaster 117 and 1144 models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
15-1/4" Oregon OE Style High Lift Blade for 44" Exmark Lazer Z CT, Lazer Z HP, Phazer. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly which delivers a clean cut for quality results.
15-1/8" Oregon Medium Lift Blade used on 42" Dixie Chopper Zee 1 also used on 44" Bush Hog models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.
15-11/16" Oregon Medium Lift Blade used on 44" Hustler FasTrak, Super Mini Z, Mini Z models. Can also be used on 44" Land Pride models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.
15-3/8" Oregon Gator G5 Mulching Blade used on 30" Exmark Commercial Walk-Behinds and Toro TimeMaster models. This blade is 3" wide compared to the original which is 2-1/4" wide. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
15-5/8" XHT Medium Lift Blade used on 44" Hustler Fas Trak, Super Mini Z, Mini Z models. Can also be used on 44" Landpride models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
16-1/2" EMP Medium Lift Heavy Duty Blade thats used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Lesco, Scag, Toro, Wright Mfg, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
16-1/2" Oregon Gator G3 Mulching Blade used on 48" models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
16-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Simplicity and Snapper models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
16-1/2" High Lift Blade used on 48" Cub Cadet ZForce (53AA5A7M710) and (53AA5A7M712) ZTR models. Replaces Cub Cadet OEM# 01004772Length: 16-1/2"Width: 3.00"Thick: .203"Center Hole: 3/4(May NOT fit all models- Check product description for exact OEM Part # match)
16-1/2" EMP High Lift Heavy Duty Blade used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, John Deere, Scag, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
16-1/2" Oregon High Lift Heavy Duty Blade used on various 48" models. Such as Bad Boy, BigDog, Hustler, John Deere, Scag, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
16-1/2" EMP T4 Heavy Duty Mulching Blade for several different brands for several different brands of 32" and 48" mowers, from Bad Boy, Gravely/Great Dane, Scag, Toro, Wright Mfg and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.
16-1/4" Predator Series HD Mulching Blade for several brands of 32" and 48" Mower decks. Used on Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
16-1/4" Oregon Gator G3 Mulching Blade used on different brands of 48" models, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
16-1/4" Oregon Gator G3 Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
16-1/4" Oregon Gator G6 HD Mulching Blade used on several brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 46" Exmark Triton deck models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. It’s not a replacement blade, It’s an upgrade.
16-1/4" XHT High Lift Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
