You are here:Home > 2 Cycle & Parts > Chainsaw Parts
We found 69 results matching your criteria.
Sort By:
Page of 3
4137 124 2800 Air Filter: Stihl 50-182 Stihl Air Filter

Air Filter used on Stihl Trimmer FS74, FS76, FC72 models. Also used on Stihl Hedge Trimmer HS72, HS74, HS76, HS80 and BG72 Blower modes.

  • Replaces Stihl OEM# 4137-124-2800, 4137 124 2800
  • Length: 2-3/8"
  • Width: 2-3/8"
  • Thick: 1/4"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $3.45
99969-6505 Kawasaki Bar & Chain Oil Kawasaki Bar & Chain Oil

Kawasaki Ktech Bar & Chain Oil will work with any brand of chainsaw. Lubricates cutter bar and chain for optimal chainsaw performance. Formulated to help cool and reduce friction between bar and chain. Engineered with high-tack properties to maintain adhesion, even while chainsaw operates at the highest speed and power settings. Adheres to metal to help prevent sling-off and spatter while chainsaw is in use. Uses expertly engineered base oils, additives, and specialty components for guaranteed effectiveness

  • 1 Quart (12 to a case)

Our Price: $4.65
90PX044G 12" AdvanceCut Saw Chain: Oregon Oregon 12" AdvanceCut Saw Chain

12" Oregon AdvanceCut Saw Chain, comes standard on most 12" brand Pole saws.

  • 3/8" Low Profile Pitch, .043 Gauge, 44 Drive Links
  • For saw engines sizes up to 42cc.
  • Use with Oregon Bar# 124MLEA074

Our Price: $16.25
Sale Price: $14.50
You save $1.75!
91VXL044G 12" VersaCut Saw Chain: Oregon Oregon 12" VersaCut™ Saw Chain

12" Oregon VersaCut Saw Chain

  • 3/8" Low Profile Pitch, .050 Gauge, 44 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life.
  • Used with saw engines - up to 42cc
  • Mainly used on smaller engine Stihl models (MS190T, MS192T, MS200 etc)
  • Used on Oregon Bar# 120SDEA074

Our Price: $14.95
91VXL052G 14" VersaCut Saw Chain: Oregon Oregon 14" VersaCut™ Saw Chain

14" Oregon VersaCut™ Saw Chain

  • 3/8" Low Profile Pitch, .050 Gauge, 52 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life.
  • Used on saw engines: up to 42cc
  • Mainly used on smaller engine Husqvarna models (120 Mark II, 235, 240, 338XPT, T435, T540 etc)
  • Used on Oregon Bar# 140DGEA041 or 140SXEA041

Our Price: $16.25
99969-6506A K-Tech Bar and Chain Oil: Kawasaki Kawasaki Bar & Chain Oil

Kawasaki Ktech Bar & Chain Oil will work with any brand of chainsaw. Lubricates cutter bar and chain for optimal chainsaw performance. Formulated to help cool and reduce friction between bar and chain. Engineered with high-tack properties to maintain adhesion, even while chainsaw operates at the highest speed and power settings. Adheres to metal to help prevent sling-off and spatter while chainsaw is in use. Uses expertly engineered base oils, additives, and specialty components for guaranteed effectiveness

  • 1 Gallon (3 to a case)

Our Price: $16.85
91VXL050G 14" VersaCut Saw Chain: Oregon Oregon 14" VersaCut™ Saw Chain

14" Oregon VersaCut™ Saw Chain

  • 3/8" Low Profile Pitch, .050 Gauge, 50 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life.
  • For saw engines sizes up to 42cc
  • Mainly used on smaller engine Stihl models (MS190T, MS192T, MS200 etc)
  • Used on Oregon Bar# 140SDEA074

Our Price: $16.95
90PX050G 14" AdvanceCut Saw Chain: Oregon Oregon 14" AdvanceCut™ Saw Chain

14" Oregon AdvanceCut™ Saw Chain

  • 3/8" Low Profile Pitch, .043 Gauge, 50 Drive Links
  • The low-vibration low kickback Chamfer Chisel™ cutters' have twin cutting corners which offer outstanding performance. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life. The .043" gauge narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems. Top-Plate Filing Indicators make accurate sharpening easier.
  • For saw engines up to 42cc.
  • Most commonly used as OEM# replacement on Stihl HT-131 polesaw bar.
  • Use with Oregon Bar# 144MLEA074

Our Price: $16.95
B116B0LSUH Timber Ridge 16" Guide Bar 16" Timber Ridge Guide Bar

16" Timber Ridge Guide Bar

  • .325" Pitch, .050 Gauge, 66 Drive Links
  • Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555
  • Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
  • Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540
On Sale 25% Off Use Code: BAROVRSTK24

Our Price: $19.95
91VXL056G 16" VersaCut Saw Chain: Oregon Oregon 16" VersaCut™ Saw Chain

16" Oregon VersaCut™ Saw Chain

  • 3/8" Low Profile Pitch, .050 Gauge, 56 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life.
  • For saw engines sizes up to 42cc
  • Used on Oregon Bar# 160DGEA041 or 160SXEA041

Our Price: $20.95
70504 5/32 Round Files (12pk): Oregon Oregon Round Files (12pk)

Oregon's 5/32 Round Files for chain sharpening. Made from the finest
premium steel using state-of-the-art production and finishing processes
for the best hand sharpening results on your saw chain.

  • Replaces Stihl OEM# 5605-772-4006
  • Consistent tooth height removes metal faster & more smoothly
  • Double-cut design resists clogging and has long stay sharp
  • 5/32" (4.0 mm) diameter files
  • Files fit both the standard file guide and Sure Sharp bar-mounted filing guide
  • 12 to a pack

Our Price: $20.95
70503 3/16 Round Files (12pk): Oregon Oregon Round Files (12pk)

Oregon's 3/16 Round Files for chain sharpening. Made from the finest
premium steel using state-of-the-art production and finishing processes
for the best hand sharpening results on your saw chain.

  • Replaces Stihl OEM# 5605-772-4806
  • Consistent tooth height removes metal faster & more smoothly
  • Double-cut design resists clogging and has long stay sharp
  • 3/16" (4.8 mm) diameter files
  • Files fit both the standard file guide and Sure Sharp bar-mounted filing guide
  • 12 to a pack

Our Price: $20.95
70502 7/32 Round Files (12pk): Oregon Oregon Round Files (12pk)

Oregon's 7/32 Round Files for chain sharpening. Made from the finest
premium steel using state-of-the-art production and finishing processes
for the best hand sharpening results on your saw chain.

  • Replaces Stihl OEM# 5605-772-5506
  • Consistent tooth height removes metal faster & more smoothly
  • Double-cut design resists clogging and has long stay sharp
  • 7/32" (5.5mm) diameter files
  • Files fit both the standard file guide and Sure Sharp bar-mounted filing guide
  • 12 to a pack

Our Price: $20.95
20LPX066G 16" PowerCut Chisel Chain: Oregon Oregon 16" PowerCut™ Chisel Chain

16" Oregon PowerCut™ Chisel Chain

  • .325" Pitch, .050 Gauge, 66 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
  • Mainly used on saw engines 38cc to 62cc
  • Used on Oregon Bar# 160VXLGK095 or 160RNBK095

Our Price: $20.95
20LPX072G 18" PowerCut Chisel Chain: Oregon Oregon 18" PowerCut™ Chisel Chain

18" Oregon PowerCut™ Chisel Chain

  • .325" Pitch, .050 Gauge, 72 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
  • Mainly used on saw engines 38cc to 62cc
  • Used on Oregon Bar# 180VXLGK095 or Timber Ridge Bar# B118B0LSUHP

Our Price: $21.95
124MLEA074 12" Single Rivet Chainsaw Bar: Oregon Oregon 12" Single Rivet Chainsaw Bar

Oregon 12" Single Rivet Chainsaw Bar

  • Specs: 3/8" Low Profile Pitch, .043" Gauge, 44 Drive Links
  • 7 Tooth Nose Sprocket
  • Replaces most brands of stock 12" pole saw bars (Husqvarna and Stihl)
  • Use Oregon Chain# 90PX044G

Our Price: $21.95
B118B0LSUHP Timber Ridge 18" Solid Tip Guide Bar 18" Timber Ridge Guide Bar

18" Timber Ridge Solid Tip Guide Bar

  • .325 Pitch, .050 Gauge, 72 Drive Links
  • Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555, 560XP
  • Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
  • Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540
  • Laminate Sprocket (4 Rivet Nose)
  • Replaces Oregon# 180SLGK095
  • Use 20LPX072G Oregon Chain
On Sale 25% Off Use Code: BAROVRSTK24

Our Price: $22.95
91VXL062G 18" VersaCut Saw Chain: Oregon Oregon 18" VersaCut™ Saw Chain

18" Oregon VersaCut™ Saw Chain

  • 3/8" Low Profile Pitch, .050 Gauge, 62 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life.
  • Used with engines - up to 42cc
  • Used on Oregon Bar# 180DGEA041

Our Price: $23.95
20LPX078G 20" PowerCut Chisel Chain: Oregon Oregon 20" PowerCut™ Chisel Chain

20" Oregon PowerCut™ Chisel Chain

  • .325" Pitch, .050 Gauge, 78 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
  • Mainly used on saw engines 38cc to 62cc
  • Used on Oregon Bar# 200VXLGK095 or Timber Ridge Bar# B120B0LSUH

Our Price: $23.95
72LPX070G 20" PowerCut Chisel Chain: Oregon Oregon 20" PowerCut™ Chisel Chain

20" Oregon PowerCut™ Chisel Chain

  • 3/8" Pitch, .050 Gauge, 70 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
  • Recommended engine size is 50cc-100cc.
  • Most commonly used on Echo CS590 Chain Saw models
  • Used on Oregon 20" Bar# 200RNDD176 or 200VXLHD176

Our Price: $23.95
72LPX068G 18" Powercut Chisel Chain: Oregon Oregon 18" Powercut™ Chisel Chain

18" Oregon Powercut™ Chisel Chain

  • 3/8" Pitch, .050 Gauge, 68 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
  • Recommended engine size is 50cc-100cc.
  • Used on Oregon 18" Bar's# 180RNDD009, 180VXLHD009, or 180VXLHK095

Our Price: $23.95
22LPX074G 18" PowerCut Chisel Chain: Oregon Oregon 18" PowerCut™ Chisel Chain

18" Oregon PowerCut™ Chisel Chain

  • .325" Pitch, .063 Gauge, 74 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life.
  • Mainly used on saw engines 38cc to 62cc
  • Use on Oregon Bar# 183VXLGD025

Our Price: $23.95
20LPX078G 20" Powercut Chisel Chain: Oregon Oregon 20" Powercut™ Chisel Chain

20" Oregon Powercut™ Chisel Chain

  • 3/8" Pitch, .050 Gauge, 72 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
  • Recommended engine size: 50cc-100cc.
  • Used on Oregon 20" Bar# 200RNDK095 or 200RNDD009

Our Price: $24.95
120DGEA041 12" Single Rivet Chainsaw Bar: Oregon Oregon 12" Single Rivet Chainsaw Bar

Oregon 12" Single Rivet Chainsaw Bar

  • Specs: 3/8" Low Profile Pitch, .050" Gauge, 45 Drive Links
  • 7 Tooth Nose Sprocket
  • Fits Husqvarna models: 136, 140, 235, 235E, 240, 240E, 243, 33, 36, 38, 41
  • Fits Echo models: CS280, CS300, CS301, CS302, CS303T, CS305, CS310, CS330, CS330T, CS340, CS355T, CS350, CS360T, CS370, CS400
  • Fits Jonsered models: 2035, 2036, 2040, CS2135, CS2137, CS2138, CS2234, CS2238S
  • Fits Redmax models: G250, G2500, G300AVS, G300TS, G3200EZ, G3300E, G3800, GZ3500T, GZ380
  • Use Oregon Chain# 91VXL045G

Our Price: $24.95
72LPX066G 18" PowerCut Chisel Chain: Oregon Oregon 18" PowerCut™ Chisel Chain

18" Oregon PowerCut Chisel Chain

  • 3/8" Pitch, .050 Gauge, 66 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
  • Recommended engine size: 50cc-100cc.
  • Most commonly used on Echo CS590 Chain Saw model
  • Used on Oregon 18" Bar# 180RNDD176

Our Price: $25.95
B120B0LSUH Timber Ridge 20" Guide Bar 20" Timber Ridge Guide Bar

20" Timber Ridge Solid Nose Guide Bar

  • .325 Pitch, .050 Gauge, 78 Drive Links
  • Fits Husqvarna models: 346XP, 350, 357XP, 435E, 445, 445E, 450, 450E, 455 Rancher, 460 Rancher, 543XP, 545, 545 Mark II, 55 Rancher, 550XP, 550XP Mark II, 555, 560XP
  • Fits Jonsered models: CS2145, CS2149, CS2150, CS2240, CS2245, CS2250, CS2260
  • Fits Makita/Dolmar models: DCS430, DCS431, DCS46018, DCS510, DCS52001, DCS5201, DCS540
  • Laminate Sprocket (4 Rivet Nose)
  • Replaces Oregon# 200VXLGK095
  • Use 20LPX078G Oregon Chain
On Sale 25% Off Use Code: BAROVRSTK24

Our Price: $25.95
22LPX081G 20" PowerCut Chisel Chain: Oregon Oregon 20" PowerCut™ Chisel Chain

20" Oregon PowerCut Chisel Chain

  • .325" Pitch, .063 Gauge, 81 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life.
  • Mainly used on saw engines 38cc to 62cc
  • Use on Oregon Bar# 203VXLGD025 or Timber Ridge Bar# B120B3LSSNP

Our Price: $26.95
75EXL072G 20" PowerCut Chisel Chain: Oregon Oregon 20" PowerCut™ Chisel Chain

20" Oregon PowerCut Chisel Chain

  • 3/8" Pitch, .063 Gauge, 72 Drive Links
  • 75EXL has a reshaped cutter and proprietary grind technology for superior performance, sharpness and consistency (replaces 75LGX). This low-vibration, full chisel cutter chain is designed to maximize every cut with less effort. Blued Cutters deliver high-quality protection against corrosion. LubriTec™ keeps your chain and guide bar oiled for less friction and longer life.
  • Mainly used on saw engines 50cc to 100cc
  • Use on Oregon Bar# 203VXLHD025

Our Price: $26.95
20LPX080G 20" Oregon PowerCut Chisel Chain: Oregon 20" Oregon PowerCut™ Chisel Chain

20" Oregon PowerCut Chisel Chain

  • .325" Pitch, .050 Gauge, 78 Drive Links
  • The low-vibration, full chisel cutters give you top performance. Blued cutters deliver high-quality protection against corrosion. Exclusive OCS-01 Steel provides greater durability.
  • Mainly used on saw engines 38cc to 62cc
  • Most common on Husqvarna 455 Rancher saws from Lowe's with 20" Bars with a .325" pitch.

Our Price: $26.95
140SDET041 14" Intenz Single Rivet Chainsaw Bar: Oregon Oregon 14" Intenz® Single Rivet Chainsaw Bar

Oregon 14" Intenz® Single Rivet Chainsaw Bar

  • Specs: 3/8" Low Profile Pitch, .050" Gauge, 52 Drive Links
  • 7 Tooth Nose Sprocket
  • Fits Husqvarna models: 136, 140, 235, 235E, 240, 240E, 243, 33, 36, 38, 41
  • Fits Echo models: CS280, CS300, CS301, CS302, CS303T, CS305, CS310, CS330, CS330T, CS340, CS355T, CS350, CS360T, CS370, CS400
  • Fits Jonsered models: 2035, 2036, 2040, CS2135, CS2137, CS2138, CS2234, CS2238S
  • Fits Redmax models: G250, G2500, G300AVS, G300TS, G3200EZ, G3300E, G3800, GZ3500T, GZ380
  • Use Oregon Chain# 91VXL052G

Our Price: $28.95