You are here:Home > Deck Parts > Spindles
We found 46 results matching your criteria.

Sort By:
Page of 2
Oregon's Spindle Assembly 82-040 Oregon's Spindle Assembly 82-320 Oregon's Spindle Assembly 82-017
Ariens/Gravely Spindle Assembly
Usually Ships in 24 Hours
Our Price: $63.95
Bobcat Spindle Assembly
Usually Ships in 24 Hours
Our Price: $121.95
Bobcat/Bunton Spindle Assembly
Usually Ships in 24 Hours
Our Price: $75.95
Part# 82-040

Oregon's Replacement Spindle Assembly that's used on both Ariens & Gravely zero turn mower models. Used on Gravely ZT Series riders. Used on most Arien's Zoom Series riders.
  • Replaces Gravely OEM# 51510000, 61527600, 61543800
  • Replaces Ariens OEM# 51510000, 61527600, 61543800
  • Height: 4-1/4"
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-320

Oregon's Replacement Spindle Assembly for the Bobcat XM model series with 36" & 48" Decks. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Bobcat OEM# 36567
  • Shaft length: 6-1/4"
  • Shaft diameter: 1"
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-017

Oregon's Replacement Spindle Assembly for the Center Spindle on 61" Bobcat/Bunton ZT223 deck models. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Bobcat/Bunton OEM# 2186207
  • Shaft length: 6-7/8"
  • Cast Iron housing
(May NOT fit all models- Check product description for exact OEM Part # match)
Oregon Spindle Assebly 82-019 Oregon Spindle Assembly 82-322 Exmark Spindle Assembly 103-1184
Bobcat/Bunton Spindle Assembly
Usually Ships in 24 Hours
Our Price: $72.95
Dixie Chopper Spindle Assembly
Usually Ships in 24 Hours
Our Price: $95.95
Exmark Spindle Assembly
Usually Ships in 24 Hours
Our Price: $114.95
Part# 82-019

Oregon's Replacement Spindle Assembly for the Outer Spindles on a 61" Bobcat/Bunton ZT223 deck models. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Bobcat/Bunton OEM# 2186205
  • Height: 5-1/2"
  • Cast Iron housing
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-322

Oregon Spindle Assembly for the Outer (Left and Right) Spindles on 50" & 60" Dixie Chopper deck models.
  • Replaces Dixie Chopper OEM# 10161, 300441
  • Height: 8"
  • Short Shaft
  • For Center Spindle use EMP part# 82-323
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-346

Oregon's Replacement Spindle Assembly that fit older 52" Exmark Lazer Z HP models with Serial numbers 260,000 & Above. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Exmark OEM# 103-1184
  • Includes Pulley
  • Height: 6-1/2"
  • For replacement bearing use EMP part# 45-263
(May NOT fit all models- Check product description for exact OEM Part # match)

Exmark Spindle Assembly 103-8280 Exmark Spindle Assembly 103-1140 Exmark Spindle Assembly 103-8075
Exmark Spindle Assembly
Usually Ships in 24 Hours
Our Price: $53.65
Exmark Spindle Assembly
Usually Ships in 24 Hours
Our Price: $115.95
Exmark Spindle Assembly
Usually Ships in 24 Hours
Our Price: $108.95
Part# 82-022

Replacement Spindle Housing Assembly (Bearing and Dust Covers ONLY). Used on all sort of various 36", 44", 48" and 52" Exmark mower models such as: Lazer Z CT, HP, XP and XX, the Phazer Series, several different Metro Series models, also used on Turf Tracer S, and X Series. Lastly used on Viking Hydro series.
  • Replaces Exmark OEM# 103-2548, 1-634619, 1-323532, 103-8280
  • Housing, Bearings and Covers Only, Does not include spindle shaft or pulley
  • For replacement bearings use EMP part# 45-263
  • Height: 3-3/4"
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-344

Oregon's Replacement Spindle Assembly that fit older 52" & 60" Exmark Lazer Z models with Serial numbers 320,000 -- 369,999. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Exmark OEM# 103-1140
  • Includes Pulley
  • Height: 7"
  • For replacement bearing use EMP part# 45-263
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-347

Oregon's Replacement Spindle Assembly that are used on older Exmark Turf Tracer & Lazer Z XP models with 60" Decks and Serial Numbers between 320,000 - 351,999. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Exmark OEM# 103-3200, 103-8075
  • Includes Pulley (Pulley OD: 6.3")
  • Height: 6-1/2"
  • For replacement bearing use EMP part# 45-263
(May NOT fit all models- Check product description for exact OEM Part # match)

Exmark Spindle Assembly 103-8323 Exmark Spindle Assembly 1-644092 Exmark Spindle Assembly 109-2102, 109-6917
Exmark Spindle Assembly
Usually Ships in 24 to 48 Hours
Our Price: $119.95
Exmark Spindle Assembly
Usually Ships in 24 to 48 Hours
Our Price: $113.95
Exmark Spindle Assembly
Usually Ships in 24 Hours
Our Price: $175.75
Part# 82-348

Replacement Spindle Assembly that fits on older 72" Exmark Lazer Z XP Series models with Serial numbers 352,000 to 539,999.
  • Replaces Exmark OEM# 103-3206, 103-8323
  • Includes 8" Pulley, blade bolt and washer
  • Height: 6-3/4"
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-349

Replacement Spindle Assembly that fits on older 72" Exmark Lazer Z models with Serial numbers 260,000 to 351,999.
  • Replaces Exmark OEM# 1-644092
  • Includes 8" Pulley, blade bolt and washer
  • Height: 6-3/4"
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-361

Oregon's Replacement Spindle Assembly for Exmark LZD, LZDS, LZS, LZX and LZZ Series mowers. Spindle assembly includes the blade and pulley mounting hardware (pulley not included). Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Exmark OEM# 109-2102, 109-6917
  • Height: 7-1/2"
(May NOT fit all models- Check product description for exact OEM Part # match)

Exmark Spindle Assembly 103-9078, 103-9081 Exmark Spindle Assembly 116-3344 Exmark Spindle Assembly 126-4630
Exmark Spindle Assembly
Usually Ships in 24 to 48 Hours
Our Price: $130.95
Exmark Spindle Assembly
Usually Ships in 24 Hours
Our Price: $52.95
Exmark Spindle Assembly
Usually Ships in 24 Hours
Our Price: $61.95
Part# 82-362

Replacement Spindle Assembly that fit on Exmark 48" Lazer CT and 48" Lazer HP models.
  • Replaces Exmark OEM# 103-9078, 103-9081
  • Includes 6-5/16" Pulley, blade bolt and washer
  • Includes grease zerk
  • Height: 7-3/8"
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-102

Oregon's Replacement Spindle Housing with Bearings (Shaft not Included) for Exmark Lazer Z E & S Series, Pioneer S Series, Radius X Series, Staris E & S Series, Turf Tracer S & X Series, and Vantage S & X Series Mowers. Oregon spindles will meet or exceed OEM standards every time, giving you a stronger start to the season.
  • Replaces Exmark OEM## 116-3344
  • OD: 6-1/2"
  • Height: 4-1/2"
  • Does Not Include Shaft
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-103

Oregon's Replacement Spindle Assembly for Exmark Radius E Series models: RAE702 (S/N# 404,314,159 and up), RAE708, RAE720, RAE740 Series. Also used on Radius S Series models: RAS651 (S/N# 408,644,346 and up), RAS691 (S/N# 408,644,346 and up), RAS708, RAS710 (S/N# 400,000,000 and up), RAS720, RAS730 (S/N# 408,644,346 and up), RAS740 (S/N# 400,000,000 and up). Oregon spindles will meet or exceed OEM standards every time, giving you a stronger start to the season.
  • Replaces Exmark OEM## 126-4630
  • Height: 4-1/2"
  • Cutter Housing Complete (includes Spindle pulley nut)
(May NOT fit all models- Check product description for exact OEM Part # match)
Oregon's Spindle Assembly 82-111 Ferris Spindle Assembly 5061033SM Ferris Spindle Assembly
Exmark/Toro Spindle Assembly
Usually Ships in 24 Hours
Our Price: $43.95
Ferris Spindle Assembly
Usually Ships in 24 Hours
Our Price: $84.95
Ferris Spindle Assembly
Usually Ships in 24 Hours
Our Price: $81.95
Part# 82-111

Oregon's Replacement Spindle Assembly for Emark Quest E & S Series mower models. Also fits on Toro TimeCutter 4200, 5000, 4216, 4235, 4260 and 5060 Series mowers. Oregon spindles will meet or exceed OEM standards every time, giving you a stronger start to the season.
  • Replaces Exmark OEM# 117-7439, 121-0751
  • Replaces Toro OEM# 117-7267, 117-7267, 117-7268, 117-7439, 121-0751
  • Height: 5-1/2"
  • For replacement bearing use EMP part# 45-257
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 82-350

Replacement Spindle Assembly for Ferris 48", 52", and 61" Hydrowalk DDS (Dual Drives) Series models. Also used on Scag SW Belt Drive Walkbehind Series and SWZ Hydro Drive Walkbehind Series, along with residental mower SSZ Super Z Series.
  • Replaces Ferris OEM# 1530301, 30301, 5030301, 5061033, 5061033SM
  • Replaces Scag OEM# 46020, 46400, 48926
  • Replaces Snapper OEM# 3036300
  • Shaft Diameter: 1"
  • Height: 7-1/4"
  • Aluminum Housing
  • 1/4" Keyway (Not Included)
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# FE01

Replacement Spindle Assembly for Ferris IS500Z, IS1500Z, IS1500ZX, IS2000Z models, and some iCD decks for these models. But also used by Snapper Pro and Simplicity for various models shown below.
  • Fits various Snapper ZT48, ZT52, ZT61 models.
  • Fits various Simplicity ZT3500, Cobalt 61", Stallion 61", Broadmoor 52" models
  • Replaces Ferris OEM# 5061095
  • Replaces Snapper/Simplicity OEM# 5061095SM
  • Includes grease zerk
(May NOT fit all models- Check product description for exact OEM Part # match)
Grasshopper Spindle assembly 623763 Grasshopper Spindle assembly 623762, 623782 Gravely/Ariens Spindle Assembly 59114000, 59201000, 59215500, 59225800, 9239400
Grasshopper Spindle Assembly
Usually Ships in 24 to 48 Hours
Our Price: $109.95
Grasshopper Spindle Assembly
Usually Ships in 24 to 48 Hours
Our Price: $109.95
Gravely/Ariens Spindle Assembly
Usually Ships in 24 Hours
Our Price: $87.95
Part# 82-351

Replacement Spindle Assembly for the left & center spindles on Grasshopper 9852 & 9861 models.
  • Replaces Grasshopper OEM# 623781, 623763
  • Height: 5-3/4"
  • Includes mounting hardware
  • For right side spindle use EMP part# 82-352
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-352

Replacement Spindle Assembly for the outer righthand spindle on Grasshopper 9852 & 9861 models.
  • Replaces Grasshopper OEM# 623762, 623782
  • Height: 6-1/2"
  • Includes mounting hardware
  • For Left side and Center spindle use EMP part# 82-351
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-041

Oregon's Replacement Spindle Assembly for the Outer (Left and Right) Spindles on Gravely PM Series models. But also used on most Gravely GR and HR Series mowers. Even used on Ariens 2552XL & 2560XL Zoom models. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Gravely OEM# 59114000, 59201000, 59215500, 59225800, 9239400
  • Replaces Ariens OEM# 59114000, 59201000, 59225800, 9239400
  • Height: 6-5/8"
  • For Center Spindle use EMP part# 82-042
(May NOT fit all models- Check product description for exact OEM Part # match)

Gravely/Ariens Spindle Assembly 59225700 Great Dane/Gravely/Ariens Spindle Assembly Husqvarna Spindle Bolts 584953901
Gravely/Ariens Spindle Assembly
Usually Ships in 24 Hours
Our Price: $93.95
Great Dane/Gravely/Ariens Spindle Assembly
Usually Ships in 24 to 48 Hours
Our Price: $70.95
Husqvarna Spindle Bolts
Usually Ships in 24 Hours
Our Price: $2.15
Part# 82-042

Oregon's Replacement Spindle Assembly for the Center Spindle on Gravely PM Series models. But also used on most Gravely GR, HR and ZT Series mowers. Used on various Ariens models such as Max Zoom 2560 & 2552 and Zoom 2552XL & 2560XL models. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Gravely/Ariens OEM# 58810800, 59202600, 59215400, 59225700, 69219700
  • Height: 6-7/8"
  • For Outer Spindles use EMP part# 82-041
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 82-328

Replacement Spindle Assembly used on older Great Dane Chariot, Scamper and Surfer mower models. Also used on Gravely Pro-Stance 34", 48", 52", and 61" deck models and older Pistol grip walkbehind models. Also used on Ariens 52" ProZoom model.
  • Replaces Great Dane OEM# D18030, 00200260, 00200262
  • Replaces Gravely/Ariens OEM# 00200260, 00200262, 00872700
  • Includes grease zerk
  • Height: 6-1/2"
  • For replacement bearings use EMP part# 45-220
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 584953901

Genuine OEM Husqvarna Self Tapping Spindle Bolts for many different mower models and brands.
  • Use Husqvarna/Redmax/Dixon/Jonsered OEM# 584953901
  • Used with the following EMP spindles# 539131898 & 587125201
Genuine OEM Husqvarna & PoulanPro Spindle 587820301 Genuine OEM Husqvarna/PoulanPro Spindle Assembly 587125201 Husqvarna/Redmax Spindle Assembly 539131898
Husqvarna/PoulanPro Spindle Assembly
Usually Ships in 24 Hours
Our Price: $32.99
Husqvarna/PoulanPro Spindle Assembly
Usually Ships in 24 Hours
Our Price: $27.99
Husqvarna/Redmax Spindle Assembly
Usually Ships in 24 Hours
Our Price: $65.99
Part# 587820301

Genuine OEM Husqvarna Spindle Assembly thats used both by Husqvarna, PoulanPro and Dixon mower models. Fits both Lawn tractors and ZTR's by Husqvarna. Fits following Husqvarna models: Z254, Z254i, MZ5424CA, RZ5426, LGT2654, LGTH22V48, LGTH24V54, YTH22K48, YTH23V48, YTH24V48, YTH24K54, YTH25K54, YTH26V54. Also used on these PoulanPro models: P54ZX, 540ZX, 541ZX, 950ZX, PB22VA48, PB22VA54, PP20VH48, PP22V48, PP22VA54, PP22VH48, PP24VH54. Also used on Dixon models: D25KH48,D26KH54, SpeedZTR54, SpeedZTR54BF. Even used on McCullloch models: ZM3016, M23-48T, and M24-54T.
  • Replaces Husqvarna/Poulan/Dixon OEM# 532187292, 539112057, 587125401, 587820301
  • Includes Self tapping mounting bolts
  • 5 Star Pattern for the blade center hole
  • Includes grease zerk (make sure to grease, even though top bearing is sealed, bottom bearing is not)
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 587125201

Genuine OEM Husqvarna Spindle Assembly thats used on both Husqvarna and PoulanPro and a few other brands as well. Fits the following Husqvarna models: Z142, Z146, Z246, Z246i, RZ46i, RZ4622, RZ4622TBF, RZ4623. And used on the PoulanPro models: P46ZX, PX46Z, PP42SZ, PP46SZ, PP46SZ. Also used on the Jonsered Z46R model.
  • Replaces Husqvarna/PoulanPro/Jonsered OEM# 532174356, 532174356
  • Does not include Self Tapping bolts. Order (4) of EMP part# 584953901 per spindle
  • Includes grease zerk (make sure to grease, even though top bearing is sealed, bottom bearing is not)
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 539131898

Genuine OEM Husqvarna Cast Iron Spindle Assembly for several different mower brands, series, and models like Redmax, Dixon and Jonsered mowers. Used on the following Husqvarna models: Z242E, Z242F, Z248F, Z254F, TS248G, TS254G, TS354x, TS348D, MZ48, MZT52, MZT61 and many different YT tractor series. Used on Redmax models: CZT52, CZT61, CZTE54, RZT42, RZT48, RZT48X, RZT54. Used on Dixon models: Ultra 52, Ultra 61, Ram48ZTCA, SpeedZTR48SE, SpeedZTR48, SpeedZTR48BF and other older models. Even used on Jonsered Z54X model.
  • Replaces Husqvarna/Redmax/Dixon/Jonsered OEM# 539131898
  • Cast Iron Housing
  • Does not include Self Tapping bolts. Order (4) of EMP part# 584953901 per spindle
  • Includes grease zerk (make sure to grease, even though top bearing is sealed, bottom bearing is not)
(May NOT fit all models- Check product description for exact OEM Part # match)
Hustler Spindle assembly 350595 Hustler Spindle assembly 783506 Hustler Spindle assembly 796235, 796235X
Hustler Spindle Assembly
Usually Ships in 24 Hours
Our Price: $72.95
Hustler Spindle Assembly
Usually Ships in 24 Hours
Our Price: $61.95
Hustler Spindle Assembly
Usually Ships in 24 Hours
Our Price: $91.50
Part# 82-021

Oregon's Replacement Spindle Assembly for older Hustler Z, ATZ, and Super Z models with 52", 60" and 72" decks that use cast iron housing. Oregon replacement parts are built to meet or exceed OEM standards.
  • Replaces Hustler/Excel OEM# 350595, 350595K
  • Cast Iron housing
  • Height: 6-3/8"
  • Include grease zerk
(May NOT fit all models- Check product description for exact OEM Part # match)

Part # B1HS100

Replacement Spindle Assembly for Hustler FasTrak, FasTrak SD, Sport, Mini Z, and Super Mini ZTR models, Also used on Trimstar (Hydro drive) walkbehind models.
  • Replaces Hustler OEM# 783506
  • Height: 5-1/2"
  • OD: 5-1/4"
(May NOT fit all models- Check product description for exact OEM Part # match))

Part# B1HS14

Replacement Spindle Assembly for older Hustler Z, ATZ, and Super Z models with 52", 60" and 72" decks that use cast iron housing. Very close to EMP part# 82-021 which is slightly shorter shaft.
  • Replaces Hustler/Excel OEM# 796235, 796235X
  • Cast Iron housing
  • Height: 7"
  • Include grease zerk
(May NOT fit all models- Check product description for exact OEM Part # match)