You are here:Home > Blades > Blades by Lift Type > High-Lift Blades
We found 109 results matching your criteria.
Sort By:
Page of 4
320234 15" Oregon High Lift Blade: Grasshopper 91-536 15" High Lift HD Blade

Part# 91-536

15" Oregon High Lift HD Blade used on 44" Grasshopper models. Also used on various 48" Front and Mid Mount Deck Grasshopper models. Also used on early Country Clipper and Woods models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
  • Replaces Grasshopper OEM# 320232, 320234
  • Replaces Country Clipper OEM# H-1665, H-1715, H-2013
  • Replaces Woods OEM# 70014, 70062KT, 7014KT, 72896KT
  • Length: 15"
  • Center hole: 1/2"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Offset: 5/16"
  • Air Lift: 1"
  • Requires (3) per 44" deck or (1) 91-536 & (2) 91-532 for 48" Grasshopper only
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.65
55-4940 15-1/2" Oregon High Lift Blade: Toro 94-039 15-1/2" High Lift Blade

Part# 94-039
15-1/2" Oregon High Lift Blade for various 44" Toro SFS decks on models 117, 120 Groundsmaster, TimeCutter ZX, XL440H Tractors, and Proline Pistol Grip Hydro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Toro OEM# 108-1125, 44-5480, 55-4940, 55-4940-03, 55-4940-09
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Offset: 5/16"
  • Requires (3) per 44" deck
  • Oregon has discontinued this blade, in stock while supplies last
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.95
103-2529-S 15-1/4" Oregon OE Style High Lift Blade: Exmark 91-369 15-1/4" OE Style High Lift Blade

Part# 91-369
15-1/4" Oregon OE Style High Lift Blade for 44" Exmark Lazer Z CT, Lazer Z HP, Phazer. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly which delivers a clean cut for quality results.

  • Replaces Exmark OEM# 103-2529-S, 103-2529S, 1-653101
  • Length: 15-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Requires (3) per 44" deck
  • Best choice for broad leaf grasses such as Saint Augustine and Fescue
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.10
Oregon's 16-1/2" High Lift Blade 91-621 16-1/2" High Lift Blade

Part# 91-621
16-1/2" Oregon High Lift Blade used on several brands of 32" and 48" mower decks. Such as Bad Boy, Hustler, John Deere, Scag, Wright Stander and more. Oregon 91-621 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205
  • Replaces Encore OEM# 483035
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 601123, 795797, 795797X, 606252, 606252X
  • Replaces John Deere OEM# TCU34166, AM104489
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 48110, 481706, 482461, 482877, A48184
  • Replaces Toro OEM# 107-3195, 107-3195-03, 107-3196, 107-3196-03, 110-0415, 110-0416, 110-0417
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 3.00"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $13.25
16-1/2" EMP High Lift Heavy Duty Blade 26-004 16-1/2" High Lift HD Blade

Part# 26-004
16-1/2" EMP High Lift Heavy Duty Blade used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, John Deere, Scag, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205, PL4855
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler OEM# 601014, 601123, 795757, 606252
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Snapper/Kees OEM# 1-7043, 7075771, 7075771BZ, 7075771BZYP
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.95
Sale Price: $12.50
You save $1.45!
16-1/2" Oregon High Lift HD Blade 92-036 16-1/2" High Lift HD Blade

Part# 92-036
16-1/2" Oregon High Lift Heavy Duty Blade used on various 48" models. Such as Bad Boy, BigDog, Hustler, John Deere, Scag, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205, PL4855
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler/BigDog OEM# 601014, 601123, 795757, 606252
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Snapper/Kees OEM# 1-7043, 7075771, 7075771BZ, 7075771BZYP
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (2) per 32" or (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $16.95
16-1/4" XHT High Lift Blade B1EM1895 16-1/4" High Lift Blade

Part# B1EM1895
16-1/4" XHT High Lift Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models.. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Exmark OEM# 103-6401, 103-6401-S
  • Replaces Toro OEM# 109-6873
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Require (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.95
793-009 Oregon 16-1/4" High Lift Blade 16-1/4" High Lift Blade

Part# 793-009
16-1/4" Oregon High Lift Blade used on 32"/48" Bobcat XM Series models. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results, and enhanced hardening to keep the blade sharper and more durable.

  • Replaces Bobcat OEM# 112111-01, 272543-01, 32061, 32061A
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Offset: 1/2"
  • Air Lift: 1-1/8"
  • Requires (2) for 32" & (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.95
Sale Price: $12.95
You save $2.00!
XHT 16-1/4" High Lift HD Blade B1BC1201 16-1/4" High Lift HD Blade

Part# B1BC1201
16-1/4" XHT High Lift HD Blade
for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Bad Boy OEM# 038-4820-00, 038-4826-00
  • Replaces Bobcat/Ransome OEM# 112111-01, 32061, 32061A
  • Replaces Exmark OEM# 1-323515, 1-403026, 103-6583-S
  • Replaces Ferris OEM# 5020843
  • Replaces Snapper/Kees OEM# 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
  • Replaces Toro OEM# 103-2527
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Outer hole: 1/4
  • Requires (3) per 48" deck & (2) for 32" deck on Bad boy, Bobcat/Ransome, Ferris, Ariens/Gravely, Husqvarna and Jacobsen
  • Best choice for broad leaf grasses such as St Augustine and Fescue
(May NOT fit all models- Check product description for exact OEM Part # match)


Each Price $14.50
16-1/4" Oregon Medium Lift HD Blade 91-183 16-1/4" Medium Lift HD Blade

Part# 91-183
16-1/4" Oregon Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results

  • Replaces Bad Boy OEM# 038-4820-00, 038-4826-00
  • Replaces Bobcat/Ransome OEM# 112111-01, 32061, 32061A
  • Replaces Exmark OEM# 1-323515, 1-403059, 103-2527, 103-6583-S
  • Replaces Ferris OEM# 5020843
  • Replaces Gravely OEM# 00273000, 04919100, 04920600
  • Replaces Husqvarna OEM# 539101366, 539106040, 539106041, 539109756
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper/Kees OEM# 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Air Lift: 1"
  • Requires (2) for 32" & (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.50
Sale Price: $12.50
You save $2.00!
16-15/16" Oregon High Lift Blade 91-123 16-15/16" High Lift Blade

Part# 91-123
16-15/16" Oregon High Lift Blade for 48" Country Clipper and Snapper ZTR mowers. Used on Charger, JaZee, JaZee II/Pro, SR225, SR375, Trek Hydro Country Clippers models. Along with the follwing Snapper models: Z120T, Z1251BV, Z1401K, Z1404K, Z140T, Z160T, Z1800T, Z1801K, Z1804K, Z1805KV, Z180T, Z2001K, Z2004K, Z2010K, Z2010T, Z2205KV, Z4200M, Z4201M, Z4202M, Z4800M, Z4801M, Z4802M, Z4804M, Z6000M, Z6002M, Z6004M, ZTR, ZU4803M, ZU4804M, ZU4813M, ZU6003M, and ZU6004M. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Country Clipper OEM# 7-9388, 1-7043, H-1714, H-1666
  • Replaces Snapper OEM# 79388, 79369, 7079369, 7079369BM, 7079369YP, 7079388
  • Length: 16-15/16"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 1/2"
  • Offset: 5/16"
  • Requires (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.25
790-348 Oregon 16-15/16"  Blade; John Deere 16-15/16" Oregon Blade

Part# 790-348
Each Price (6 or More): $10.75

16-15/16" Oregon Blade used on 48" John Deere ZTrak and X Series Tractor models: X300, X304, X310, X320, X324, X330, X340, X350, X354, X360, X370, X380, X384, X390, X394, X500, X520, X530, X534, X540, X570, X580, X584, X590, X710, X730, X734, X738, X750, X754, X758, X940, X948, X949, Z325E, Z330M, Z330R, Z355E, Z355R, Z425, Z435, Z445, Z515E, Z7525E, Z530M, Z535M and Z540M.

  • Replaces John Deere OEM# M145476, M127500, M127673, UC22009
  • Width: 2.50"
  • Thick: .203"
  • Center Hole: 13/16"
  • Offset: 9/16"
  • Air Lift: 1-1/8"
  • Requires: (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $11.75
16-3/4" XHT Notched High Lift Blade  B1EP1035 16-3/4" Notched High Lift Blades

Part# B1EP1035
16-3/4" XHT Notched High Lift Blade for 48" decks on several different models of Husqvarna, Craftsman, Dixon, Jonsered, Poulan, Poulanpro, and Yazoo Kees Tractor and Residential ZTR mowers. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Husqvarna products OEM# 532173920, 532173921, 532180054, 539107519
  • Length: 16-3/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5 Point Star
  • Requires (3) for 48" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $12.05
Oregon 16-5/8" High Lift Blade 92-124 16-5/8" High Lift HD Blade

Part# 92-124
16-5/8" Oregon High Lift HD Blade used on 48" Kubota RCK48, RCK48GR, RCK48P, RCK48-LT23, RCK48P-222Z models. Made to exact OEM specifications. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

  • Replaces Kubota OEM# K5184-97532, K5576-34350, K5576-97530
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 7/8"
  • Offset: 9/16"
  • Air Lift: 1-1/8
  • Requires (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.75
16-5/8" Oregon High Lift HD Blade 91-613 16-5/8" High Lift HD Blade

Part# 91-613
16-5/8" Oregon High Lift Heavy Duty Blade used on 48" Kubota models: RCK48P-400Z, RCK48P-723Z and RCK48P-751Z. Oregon 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

  • Replaces Kubota OEM# K5583-34340
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 1-1/8"
  • Offset: 9/16"
  • Air Lift: 1-1/8"
  • Require (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $14.95
16-5/8" XHT High Lift HD Blade B1KU1044 16-5/8" High Lift HD Blade

Part# B1KU1044
Each Price (6 or more): $14.95


16-5/8" XHT High Lift Heavy Duty Blade used on 48" Kubota models: RCK48P-400Z, RCK48P-723Z and RCK48P-751Z. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Kubota OEM# K5583-34340
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 1-1/8"
  • Requires: (3) per 48"
(May NOT fit all models- Check product description for exact

Our Price: $15.95
16-5/8" XHT High Lift HD Blade B1KU1028 16-5/8" High Lift HD Blade

Part# B1KU1028
Each Price (6 or More): $13.25


16-5/8" XHT High Lift Heavy Duty Blade used on 48" Kubota models: RCK48-20ZG, RCK48GR, RCK48P-90T, RCK48P-124Z, RCK48P18BX, RCK48S-222Z. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Kubota OEM# K5575-34330
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 11/16"
  • Offset: 1/2"
  • Require (3) per 48"

Our Price: $14.25
B1KU1026 16-5/8" XHT High Lift Blade 16-5/8" High Lift HD Blade

Part# B1KU1026
Each Price (6 or more): $14.50

16-5/8" XHT High Lift HD Blade used on 48" Kubota RCK48, RCK48GR, RCK48P, RCK48-LT23, RCK48P-222Z models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Kubota OEM# K5184-97532, K5576-34350, K5576-97530
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 7/8"
  • Offset: 9/16"
  • Air Lift: 1-1/8
  • Requires (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.50
16-9/16" Oregon High Lift Blade 91-447 16-9/16" High Lift Blade

Part# 91-447
16-9/16" Oregon High Lift Blade for the following 48" John Deere Lawn Tractors: 180, 240, 245, 260, 265, 285, 320, 335, and 345. Also used on Sabre 1848GV, 1848HV, 19484GV, 1948HV, 2048HV, and 2148HV Tractor models along with Scotts S2048 and S2348 models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces John Deere OEM# AM115442, M111522, M114581, M115328, M115495, M135589, M76466
  • Length: 16-9/16"
  • Width: 2.50"
  • Thickness: .203"
  • Offset: 7/16"
  • Center Hole: 13/16"
  • Requires (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.50
Oregon 16-9/16" High Lift Blade 92-047 16-9/16" High Lift HD Blade

Part# 92-047
16-9/16 Oregon High Lift Heavy Duty Blade used on 48" Kubota models: RCK48-15BX, RCK48LT17, RCK48LTB, RCK48-20ZG, RCK48GR, RCK48P-124Z, RCK48P18BX, RCK48S-222Z. Made to exact OEM specifications. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

  • Replaces Kubota OEM# K5182-71840, K5575-34330, K5575-97530
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 11/16"
  • Offset: 1/2"
  • Air Lift: 1-1/8"
  • Require (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.25
17" Oregon High Lift HD Blade 91-505 17" High Lift HD Blade

Part# 91-505
17" Oregon High Lift Heavy Duty Blade used on 34" and 50" Dixie Chopper, Gravely, Husqvarna and Toro. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution

  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50H
  • Replaces Dixon OEM# 539129743
  • Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
  • Replaces Husqvarna OEM# 581055501
  • Replaces Toro OEM# 11-3579, 11-3579-09
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Air Lift: 1-1/8"
  • Requires (2) for 32" and (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.95
Sale Price: $14.25
You save $2.70!
17" Oregon High Lift Blade 91-146 17" High Lift Blade

Part# 91-146
17" Oregon High Lift Blade
used on Dixon 50" models: ZTR 4423, ZTR 4425, ZTR 4426, ZTR 4515B, ZTR 4516K, ZTR 4518K, ZTR 5004, ZTR 5005, ZTR 5017, ZTR 5020, ZTR 5022, ZTR 5023, ZTR 5024, and ZTR 5502. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Dixon OEM# 539117174, 539119863
  • Blade Width: 2.50"
  • Blade Thickness: .187"
  • Center hole: 11/16"
  • Air Lift: 1-1/4"
  • Require (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
TCU14939, TCU30315 John Deere 17" Blade: B1JD1051 17" High Lift Blade

Part# B1JD1051
17" XHT High Lift Blade used on 48" John Deere Quik-Trak & ZTrak models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.

  • Replaces John Deere OEM# M136194, TCU14939, TCU30315
  • Blade Width: 3.00
  • Blade Thickness: .203"
  • Center hole: 29/32"
  • Requires (3) per 48"
(Check our Models & OEM Cross-Reference #'s section to find your model#)

Each Price $17.95
17" XHT High Lift Blade B1CC1406 17" High Lift Blade

Part# B1CC1406
17" XHT High Lift Blade used on 48" Cub Cadet models: Enforcer PRO HW 300 348 (2018-2022), PRO X 600 KW 648 (2020-2022), PRO Z 100 EFI 148-L (2016-2019), PRO Z 100 EFI 148-S (2016-2022), PRO Z 500 KW 548-L (2018), RECON 48, Tank L48KH LZ48, SZ48, Z-Force L48 (2013-2018), Z-Force LX48 KW (2016-2019), Z-Force LZ48 (2014-2015), Z-Force S 48 (2013), Z-Force S48 (2018-2019), Z-Force SX48 KW (2016-2022), Z-Force SZ48 KH FAB (2016-2021). Also used on 48" Lesco Z-Two mower models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Cub Cadet OEM# 01005336, 02005017, 742-04417, 942-04417
  • Replaces Lesco OEM# 705336
  • Length: 17"
  • Width: 3.00"
  • Thick: .203"
  • Center Hole: 3/4
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.50
17" XHT High Lift Blade B1DC1502 17" High Lift Blade

Part# B1DC1502
17" XHT High Lift Blade used on 34" and 50" Dixie Chopper, Gravely, Husqvarna and Toro. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50H
  • Replaces Dixon OEM# 539129743
  • Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
  • Replaces Husqvarna OEM# 581055501
  • Replaces Toro OEM# 11-3579, 11-3579-09
  • Length: 17"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) for 34" and (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.90
Oregon 17" X-style Blade 91-525 17" X-style Blade

Part# 91-525
17" Oregon X-style High Lift HD Blade used on 44" Dixie Chopper Iron Eagle & Silver Eagle and 50" Dixie Chopper Classic models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency.

  • Replaces Dixie Chopper OEM# 30227-50X
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Air Lift: 1-3/16"
  • Requires: (3) per 44" & (3) per 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
TCU30315 John Deere: Oregon 17-1/16" Blade 91-079 17-1/16" High Lift Blade

Part# 91-079
17-1/16" Oregon High Lift Heavy Duty Blade used on 48" John Deere Quik-Trak & ZTrak models. Oregon has 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly.

  • Replaces John Deere OEM# M136194, TCU14939, TCU30315
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 7/8"
  • Offset: 7/16"
  • Requires (3) per 48"
(Check our Models & OEM Cross-Reference #'s section to find your model#)

Each Price $17.95
Sale Price: $15.00
You save $2.95!
17-1/2" Oregon High Lift Blade 492-731 17-1/2" High Lift Blade

Part# 492-731
17-1/2" Oregon High Lift Blade used on 50" Exmark Triton Deck models only. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results, and enhanced hardening to keep the blade sharper and more durable.

  • Replaces Exmark OEM# 103-9605, 103-9605-S, 109-6461-S
  • Blade Width: 3.00"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Offset: 3/8"
  • Air Lift: 1-1/16"
  • Requires (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.55
XHT 17-1/2" High Lift Blade B1TR3116 17-1/2" High Lift Blade

Part# B1TR3116
17-1/2" XHT High Lift Blade used on 50" Toro TimeCutter models: MX5060, SS5000, SS5035, SS5060, Z5000, Z5020, Z5035, Z5040 and Z5060. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.

  • Replaces Toro OEM# 110-6837-03, 112-9759-03, 115-5059-03
  • Blade Width: 2.25"
  • Blade Thickness: .169"
  • Center hole: 5/8"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.95
17-1/4" XHT 2-N-1 High Lift Blade B1MA2438 17-1/4" 2-N-1 High Lift Blade

Part# B1MA2438
17-1/4" XHT 2-N-1 High Lift Blade used on 50" Cub Cadet models: RZT-L34, RZT-L50, RZT-LX50, RXT-S50, RZT-SX50 EFI, XT1-GT50, XT1-LT50, XT1-LX50, ZT1-50, ZT2-50. Also used on 50" Troybilt Mustang XP models.

  • Replaces Cub Cadet/Troybilt OEM# 742-05052, 942-05052, 942-05052A
  • Width: 2.50"
  • Thickness: .146"
  • Center Hole: 6 Point Star
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $11.95