15" Gator G3 Mulching Blade

Part# 96-343
Each Price (6 or More): $17.85

15" Oregon Gator G3 Mulching Blade for 44" Grasshopper Front Mount Deck models. Also used on Country Clipper 42" & 44" decks on Boss, Charger, JaZee, SR1025, SR375 and Trek Hydro mower models. Also used on Woods 44" decks on 1250, 1850, 1855, 2855, 5120, 5140, 5180, 5182, 5200, 5210, 5215, 5250, 6170, D14414T, D4414, D4414-3 mower models.

• Replaces Country Clipper OEM# H-1665, H-1715, H-2013
• Replaces Grasshopper OEM# 320231, 320233, 320234, 320235, 320320
• Replaces Woods OEM# 70014, 70062KT, 7014KT, 72896KT
• Length: 15"
• Width: 2.50"
• Thickness: .203"
• Center hole: 1/2"
• Offset: 5/16"
• Requires: (3) for 44" cut

(May NOT fit all models- Check product description for exact OEM Part # match)

15" High Lift HD Blade

Part# 91-536
Each Price (6 or More): $13.65

15" Oregon High Lift HD Blade used on 44" Grasshopper models. Also used on various 48" Front and Mid Mount Deck Grasshopper models. Also used on early Country Clipper and Woods models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Grasshopper OEM# 320232, 320234
• Replaces Country Clipper OEM# H-1665, H-1715, H-2013
• Replaces Woods OEM# 70014, 70062KT, 7014KT, 72896KT
• Length: 15"
• Center hole: 1/2"
• Blade Width: 2.50"
• Blade Thickness: .250"
  
• Offset: 5/16"
• Air Lift: 1"
  
• Requires (3) per 44" deck or (1) 91-536 & (2) 91-532 for 48" Grasshopper only

(May NOT fit all models- Check product description for exact OEM Part # match)

15" Low Lift HD Blade

Part# 91-557

Each Price (6 or More): $12.25

15" Oregon Low Lift Heavy Duty Blade used on 44" Grasshopper models. Also used on various 48" Front and Mid Mount Deck Grasshopper models. Also used on early Country Clipper and Woods models. Oregon has 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly and delivers a clean cut for quality results.

• Replaces Country Clipper OEM# H-1665, H-1715, H-2013
• Replaces Grasshopper OEM# 320231, 320233, 320235, 320320
• Replaces Woods OEM# 70014, 70062KT, 7014KT, 72896KT
• Length: 15"
• Width: 2.50"
• Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 3/4"
• Requires (3) per 44" deck or (1) 91-536 & (2) 91-532 for 48" Grasshopper only

(May NOT fit all models- Check product description for exact OEM Part # match)

18" Gator G3 Mulching Blade

Part# 96-329

Each Price (6 or More): $18.50

18" Oregon Gator G3 Mulching Blade used on 52" Grasshopper Front Mount & M152 Mid Mount models. Also used on 52" Woods D5221T & D6121T Mow`n Machine models. Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade.

• Replaces Grasshopper OEM# 320321
• Replaces Woods OEM# 70104KT, 70117KT, 72505KT
• Width: 2.50"
• Thickness: .203"
• Center Hole: 1/2"
• Offset: 5/16"
• Air Lift: 1"
• Requires: (3) per 52"

(May NOT fit all models- Check product description for exact OEM Part # match)

18" Gator G6 Mulching Blade

Part# 396-729

Each Price (6 or More): $23.15

18" Oregon Gator G6 Heavy Duty Mulching Blade used on 52" Grasshopper Front Mount and M152 Mid Mount deck models. Can also be used on Woods mower decks. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Grasshopper OEM# 320321
• Replaces Woods OEM# 70104KT, 70117KT, 72505KT, 72896KT, 72897KT, 72904KT
• Width: 3.00"
• Thickness: .250"
• Center Hole: 1/2"
• Offset: 5/16"
• Requires (3) per 52"

(May NOT fit all models- Check product description for exact OEM Part # match)

18" High Lift HD Blade

Part# B1GH1906

Each Price (6 or More): $15.95

18" XHT Contour High Lift Heavy Duty Blade for 52" Grasshopper Front Mount and M152 Mid Mount deck models. Also used on 52" Woods D5221T & D6121T Mow'n Machine models. (Xtreme Hardness & Toughness) High Lift blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Grasshopper OEM# 320238
  
• Replaces Woods OEM# 70117KT, 72505KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Requires (3) per 52"

(May NOT fit all models- Check product description for exact OEM Part # match)

18" High Lift HD Blade

Part# 791-532

Each Price (6 or More): $13.95

18" Oregon High Lift HD Blade used on 52" Grasshopper Front Mount and M152 Mid Mount deck models. Also used on Woods 6170, D5221T, D6121T Mow' n Machine models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Grasshopper OEM# 320239
• Replaces Woods OEM# 70117KT, 72896KT
• Width: 2.50"
• Thickness: .250"
• Center Hole: 1/2"
• Air Lift: 1"
• Requires (3) per 52" or (2) 91-532 & (1) 91-536 for 48" Rear Discharge
• Former Oregon #91-532

(May NOT fit all models- Check product description for exact OEM Part # match)

18" Low Lift Blade

Part# B1GH1900
Each Price (6 or More): $11.95

18" XHT Low Lift Blade used on 52" Grasshopper Front Mount and M152 Mid Mount models. Also be used on Woods deck models. (Xtreme Hardness & Toughness) High Lift blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Grasshopper OEM# 320236
• Replaces Woods OEM# 70104KT, 70117KT, 72505KT, 72896KT, 72897KT, 72904KT
• Blade Width: 2.00"
• Blade Thickness: .203"
• Center hole: 1/2"
• Offset: 5/16"
• Requires (3) for 52"

(May NOT fit all models- Check product description for exact OEM Part # match)

18" Low Lift HD Blade

Part# 91-558
Each Price (6 or More): $13.15

18" Oregon Low Lift HD Blade for 52" Grasshopper Front Mount and M152 Mid Mount deck models. Can also be used on Woods mower decks. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Grasshopper OEM# 320236
• Replaces Woods OEM# 70117KT, 72896KT
• Length: 18"
• Width: 2.50"
• Thickness: .250"
• Center Hole: 1/2"
• Offset: 5/16"
• Requires (3) for 52" cut

(May NOT fit all models- Check product description for exact OEM Part # match)

21" Angled Lift HD Blade

Part# B1GH1903
Each Price (6 or More): $16.95

21" XHT Angled Lift Heavy Duty Blade for 61" Grasshopper Front Mount, Rear Discharge and Mid Mount deck models. Also used on Woods 6170, D5221T, D6121T Mow' n Machine and Bush Hog FTH600 Rotary Cutter models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Grasshopper OEM# 320245
• Replaces Bush Hog OEM# 88668
• Replaces Woods OEM# 70134KT, 70142KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Requires (3) for 61"

21" Gator G3 Mulching Blade

Part# 96-346

Each Price (6 or More): $22.95

21" Oregon Gator G3 Blade for 61" Grasshopper Front Mount and M161 Mid Mount deck models. Can also be used on Bush Hog and Woods mower decks. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

• Replaces Grasshopper OEM# 320245, 320246, 320247
• Replaces Bush Hog OEM# 88668
• Replaces Woods OEM# 70134, 70134KT
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 1/2"
• Offset: 5/16"
• Requires: (3) for 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" Gator G5 Mulching Blade

Part# 596-346
Each Price (6 or More): $24.95

21" Oregon Gator G5 Blade for 61" Grasshopper Front Mount and M161 Mid Mount deck models. Can also be used on Bush Hog and Woods mower decks. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces Grasshopper OEM# 320245, 320246, 320247
• Replaces Bush Hog OEM# 88668
• Replaces Woods OEM# 70134, 70134KT
• Blade Width: 3.00"
• Blade Thickness: .203"
• Center hole: 1/2"
• Offset: 5/16"
• Requires (3) for 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" Gator G6 Mulching Blade

Part # 396-712
Each Price (6 or More): $26.25

21" Oregon Gator G6 Heavy Duty Mulching Blade used on 61" Grasshopper Front Mount & M161 Mid Mount deck models. Also used on Bush Hog and Woods models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

• Replaces Bush Hog OEM# 88668
• Replaces Grasshopper OEM# 320322, 320242, 320242, 320245
• Replaces Woods OEM# 70134, 70134KT
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1"
• Requires (3) per 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" High Lift HD Blade

Part# 91-534

Each Price (6 or More): $14.25

21" Oregon High Lift Heavy Duty Mulching Blade used on 61" Grasshopper Front Mount and M161 Mid Mount models. Also used on Bush Hog ATH600, ATH720, FTH600, FTH720 models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Grasshopper OEM# 320244
• Replaces Bush Hog OEM# 88668
• Replaces Woods OEM# 70134, 70134KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1-3/16
• Requires (3) for 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" High Lift HD Blade

Part# 91-537
Each Price: $18.50

21" Oregon High Lift HD Blade for 61" Grasshopper Front Mount and M161 Mid Mount deck models. Also used on Woods 6170, D5221T, D6121T Mow' n Machine and Bush Hog ATH600, ATH720, FTH600, FTH720 models. Aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Grasshopper OEM# 320246
• Replaces Bush Hog OEM# 88668
• Replaces Woods OEM# 70134, 70134KT
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1-1/4"
• Requires (3) per 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" High Lift HD Blade

Part# B1GH1904
Each Price (6 or More): $17 .95

21" XHT High Lift Heavy Duty Blade for 61" Grasshopper Front Mount, Rear Discharge and Mid Mount deck models. Also used on Woods 6170, D5221T, D6121T Mow' n Machine and Bush Hog FTH600 Rotary Cutter models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Grasshopper OEM# 320245
• Replaces Bush Hog OEM# 88668
• Replaces Woods OEM# 70134KT, 70142KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1"
• Requires (3) for 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" High Lift HD Blade

Part# 791-531
Each Price (6 or More): $15.50

21" Oregon High Lift Heavy Duty Blade used on 61" Grasshopper Front Mount, Rear Discharge and Mid Mount deck models. Also used on Woods 6170, D5221T, D6121T Mow' n Machine and Bush Hog FTH600 Rotary Cutter models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Grasshopper OEM# 320245
• Replaces Bush Hog OEM# 88668
• Replaces Woods OEM# 70134KT, 70142KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1"
• Requires (3) for 61"
• Formerly Oregon# 91-531

(May NOT fit all models- Check product description for exact OEM Part # match)

21" Medium Lift HD Blade

Part# B1GH1902
Each Price (6 or More): $16.95

21" XHT Medium Lift Heavy Duty Blade used on 61" Grasshopper Front Mount and M161 Mid Mount models. Also used on 61" Woods D5221T & D6121T Mow'n Machine and County Clipper models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Grasshopper OEM# 320242
• Replaces Country Clipper OEM# H-1667
• Replaces Woods OEM# 70134, 70134KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Requires (3) per 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

25" Gator G6 HD Mulching Blade

Part# 396-778
Each Price (6 or More): $30.75

25" Oregon Gator G6 Heavy Duty Mulching Blade used on 72" Grasshopper Front Mount, and M172 Mid Mount deck models. Also used on 72" Bush Hog models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

• Replaces Bush Hog OEM# 88773
• Replaces Grasshopper OEM# 320250, 320251, 320252, 320253, 320254, 320255, 320323
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1"
• Requires (3) for 72"

(May NOT fit all models- Check product description for exact OEM Part # match)

25" High Lift HD Blade

Part# 91-533
Each Price (6 or More): $20.35

25" Oregon High Lift Heavy Duty Blade used on 72" Grasshopper Front Mount, and M172 Mid Mount deck models. Also used on 72" Bush Hog and Country Clipper deck models. This blade is made to the exact OEM specification for optimum performance.

• Replaces Grasshopper OEM# 320250, 320251, 320252, 320253, 320254, 320255, 320323
• Replaces Bush Hog OEM# 88773
• Replaces Country Clipper OEM# H-2397, H-2459, H-2501
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1"
• Requires (3) per 72"

(May NOT fit all models- Check product description for exact OEM Part # match)

25" Low Lift HD Blade

Part# 91-544
Each Price (6 or More): $21.95

25" Oregon Low Lift Heavy Duty Blade used on 72" Grasshopper Front Mount, and M172 Mid Mount deck models. Also used on various 72" Bush Hog and Country Clipper deck models. This blade is made to the exact OEM specification for optimum performance. Our blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Grasshopper OEM# 320250, 320255
• Replaces Bush Hog OEM# 88773
• Replaces Country Clipper OEM# H-2397, H-2459, H-2501
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 3/4"
• Requires (3) per 72"

(May NOT fit all models- Check product description for exact OEM Part # match)

25" Mulching Blade

Part# 91-036
Each Price (6 or More): $23.50

25" Oregon Mulching HD Blade used on 72" Bush Hog ATH600, ATH720, FTH480, FTH600, and FTH720 models. Also used on various 72" Country Clipper SR1220, SR1220L SR1220, SR1220L and Grasshopper Front Mount, and M172 Mid Mount deck models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

• Replaces Bush Hog OEM# 82325, 88773
• Replaces Country Clipper OEM# H-2397, H-2459, H-2501
• Replaces Grasshopper OEM# 320251, 320252, 320253
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 1/4"
• Air Lift: 1-1/16"
• Requires: (3) per 72"

(May NOT fit all models- Check product description for exact OEM Part # match)

Grasshopper 15" Wavy Lift Blade

• 15" Length, 1/2" Center Hole, 2.00" Width
• Manufactured from .250 high carbon steel
• (3) for 44"

For larger picture, detailed specs & OEM #s (See more info below)


Our Part # 91-543
Each Price (6 or More): $8.95

Grasshopper 18" Extreme High Lift Blade (NLA)

• 18" Length, 1/2" Center Hole, 2.00" Width
• Manufactured from .250 high carbon steel
• (3) for 52"

For larger picture, detailed specs & OEM #s (See more info below)


Our Part # 91-541
Each Price (6 or More): $14.45