You are here:Home > Blades > Oregon Blades > BadBoy
We found 9 results matching your criteria.
14-1/2" Blades - (3) for 42" cut 16-1/4"- (3) For 48" Cut 18" Blade- (2) For 36" Cut
20-1/2" Blade- (3) For 60" Cut 21" Blade - (3) for 61" deck 24-1/2" Blade - (3) For 72" Cut
Sort By:
Page of 1
18" Oregon Medium Lift Blade 91-622 18" Medium Lift Blade

Part# 91-622
18" Oregon Medium Lift Blade used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 1-633482, 103-2528, 1-306283, 103-6584
  • Replaces Ferris OEM# 5021227, 5021227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 482462, 481707
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Air Lift: 1"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.99
Oregon's 16-1/2" High Lift Blade 91-621 16-1/2" High Lift Blade

Part# 91-621
16-1/2" Oregon High Lift Blade used on several brands of 32" and 48" mower decks. Such as Bad Boy, Hustler, John Deere, Scag, Wright Stander and more. Oregon 91-621 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205
  • Replaces Encore OEM# 483035
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 601123, 795797, 795797X, 606252, 606252X
  • Replaces John Deere OEM# TCU34166, AM104489
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 48110, 481706, 482461, 482877, A48184
  • Replaces Toro OEM# 107-3195, 107-3195-03, 107-3196, 107-3196-03, 110-0415, 110-0416, 110-0417
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 3.00"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $13.25
Oregon 21" High Lift Blade 91-628 21" High Lift Blade

Part# 91-628
21" Oregon High Lift Blade used on various 61" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Scag, Wright Mfg and more. This blade has an extended lift that measures 1-1/2". Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency.

  • Replaces Bad Boy OEM# 038-6080-00, 038-6085-00
  • Replaces Bobcat OEM# 42180B, WM142180B
  • Replaces Bunton OEM# PC005
  • Replaces Encore OEM# 823006
  • Replaces Ferris OEM# 15208425, 5020842
  • Replaces Giant Vac OEM# 3021538
  • Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
  • Replaces Husqvarna OEM# 539105711
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
  • Replaces Snapper OEM# 5101755BMYP
  • Replaces Wright Stander OEM# 71440003
  • Blade Width: 3.00"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Air Lift: 1-1/2" (Extended High Lift)
  • Require (3) for 61"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $16.25
96-310 Oregon 16-1/4" Gator G3 Mulching Blade 16-1/4" Gator G3 Mulching Blade

Part# 96-310
16-1/4" Oregon Gator G3 Mulching Blade used on different brands of 48" models, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Requires: (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.50
Oregon 20-1/2" Medium Lift HD Blade 94-055 20-1/2" Medium Lift HD Blade

Part# 94-055
20-1/2" Oregon Medium Lift Heavy Duty Blade used on 60" models. Such as Bad Boy, BigDog, Bunton, Dixie Chopper, early Exmark, Gravely, Hustler, Big Dog, Jacobsen and Toro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

  • Replaces Bad Boy OEM# 038-6060-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800
  • Replaces BigDog/Hustler OEM# 602771, 793794, 608271, 607280, 794685
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires: (3) per 60"
  • EMP proprietary HD blade #26-020
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.60
16-1/4" Oregon Gator G6 Blade 396-716 16-1/4" Gator G6 Mulching Blade

Part# 396-716
16-1/4" Oregon Gator G6 HD Mulching Blade used on several brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (3) per 48"
  • if out of stock try our EMP# 29-905
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $22.25
396-727 Oregon 21" Gator G6 Mulching Blade 21" Gator G6 Mulching Blade

Part# 396-727
21" Oregon Gator G6 Heavy Duty Mulching Blade used on various of 61" models. Such as Bad Boy, Ferris, Gravely, Hustler, Snapper, Scag, Wright Mfg and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

  • Replaces Bad Boy OEM# 038-6082-00, 038-6091-00
  • Replaces Bobcat OEM# 42180B, WM142180B
  • Replaces Bunton OEM# PC005
  • Replaces Encore OEM# 823006
  • Replaces Ferris OEM# 15208425, 5020842
  • Replaces Giant Vac OEM# 3021538
  • Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
  • Replaces Hustler OEM# 795252
  • Replaces Husqvarna OEM# 539105711
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
  • Replaces Snapper OEM# 5101755BMYP
  • Replaces Wright Stander OEM# 71440003, 71490003
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Require (3) per 61"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $26.40
Sale Price: $22.95
You save $3.45!
20-1/2" Oregon Gator G6 Blade 396-740 20-1/2" Gator G6 Mulching Blade

Part# 396-740
20-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on various 60" models, such as Bad Boy, Dixie Chopper, Gravely, Hustler, Toro, and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Excel OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Replaces Windsor OEM# 51-2805, 51-2800
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Requires: (3) per 60"
  • Try the Predator Blade #B1PD5009
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $26.25
396-764 Oregon 24-1/2" Gator G6 Mulching Blade 24-1/2" Gator G6 HD Mulching Blade

Part# 396-764
24-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on various 72" models. Such as Bad Boy, Ferris, Hustler, Jacobsen, Scag and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

  • Replaces Bad Boy OEM# 038-7220-00
  • Replaces Ferris OEM# 481709
  • Replaces Exmark OEM# 1-643097, 103-2521-S
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 798710, 798728
  • Replaces Jacobsen OEM# 3970261
  • Replaces Scag OEM# 482694, 482882
  • Replaces Spartan OEM# 438-0003-00
  • Replaces Toro OEM# 105-7784-03, 110-0624-03
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 72" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $31.95