25" Gator G6 Mulching Blade

Part# 396-743
Each Price (6 or More): $19.95

25" Oregon Gator G6 Heavy Duty Mulching Blade used on 72" John Deere ZTrak models: Z830A, Z850A, Z860A, Z930A, Z930M, Z950A, Z950M, Z950R, Z955M, Z955R, Z960A, Z960M, Z960R, Z970A, Z970R and Z997R. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces John Deere OEM# M141669, M142514, TCU15882
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 7/8"
• Offset: 1/2"
• Air Lift: 1"
  
• Requires (3) per 72"

(May NOT fit all models- Check product description for exact OEM Part # match)

25" High Lift HD Blade

Part# B1JD6018
Each Price (6 or More): $20.95

25" XHT High Lift Heavy Duty Blade used on 72" John Deere ZTrak (7 Iron deck) models: Z830A, Z850A, Z860A, Z930A, Z930M, Z950A, Z950M, Z950R, Z955M Z955R, Z960A, Z960M, Z960R, Z970A, Z970R, and Z997R. Also used on Compact Utility Tractors and Fairway Mowers models: 1550, 1570, 1575, 1580, 1585, 3033R, 3038R, 3039R, 3045R, 3046R, 3120, 3320, 3520, and 3720. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

• Replaces John Deere OEM# M141669, M142514, M143749, TCU15882
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 29/32"
• Offset: 1/2"
• Requires: (3) per 72"

(May NOT fit all models- Check product description for exact OEM Part # match)

24-15/16" Gator G6 HD Mulching Blade

Part# 396-775
Each Price (6 or More): $29.95

24-15/16" Oregon Gator G6 HD Mulching Blade used on various 72" John Deere X Series Tractors and Fairway Finishing models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

• Replaces John Deere OEM# AM102401, AM38314, M141786, M80783
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 7/8"
• Air Lift: 1"
• Requires (3) per 72"

(May NOT fit all models- Check product description for exact OEM Part # match)