Part# 191-108
Each Price (6 or More): $8.95

17" Oregon Wavy Mulching Blade used on 48" John Deere L120 and L130 tractor models. Also used on Scotts L2048 & L2548 and Sabre1948GV &1948HV tractor models. The Oregon 100 Series Blades offers Ultra X-tended Cutting Length, which means that each blade delivers its maximum mulching capability per rotation. Add that with our double bevel technology and the overall blade noise is reduced by up to 1.5 decibels. The 191-108 blade is made from Boron Steel that allows for the perfect balance between durability and ductility.

• Replaces John Deere OEM# GX20250, GX20434, GX20819, GY20568
  
• Length: 17"
• Width: 2.50"
• Thick: .164"
  
• Center Hole: 11/16"
• Outer Holes: 3/8"
  
• Offset: 1/4"
  

Part# 92-104
Each Price (6 or More): $10.95

Oregon 17" Wavy Mulching Blade for 48" Decks on the following John Deer Tractors: D140, D155, D160, E140, E150, E160, E170, LA120, LA130, LA140, LA145, LA155, LA165, X105, X140, X165, and X166 models. But also used on the following EZTrak models: Z245, Z255, and Z355E. The Oregon 100 Series Blades offers Ultra X-tended Cutting Length, which means that each blade delivers its maximum mulching capability per rotation. Add that with our double bevel technology and the overall blade noise is reduced by up to 1.5 decibels.

• Replaces John Deere OEM# AM137757, AM137758, AM141035, AM141036, GX21784, GX21785, GX21786, GY20852
  
• Length: 17"
• Width: 2.75"
• Thick: .164"
  
• Center Hole: 7 Point Star
  
• Offset: 3/16"
  

Part# 92-616
Each Price (6 or More): $12.95

17" Oregon Gator G3 Mulching Blade used on 48" John Deere (100 Series) Tractor models: D140, D155, D160, E140, E150, E160, E170, LA120, LA130, LA140, LA145, LA155, LA165, S140, S160, S170, X105, X140, X165, and X166 models. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces John Deere OEM# GX21784, GX21786, GY20852
  
• Width: 2.50"
• Thick: .187"
  
• Center Hole: 7 Point Star
  
• Offset: 3/4"
• Air Lift: 3/4"
  

Part# 92-675
Each Price (6 or More): $14.95

17" Oregon Gator G3 Mulching Blade used on 48" John Deere L120 & L130 Tractor models. Also used on Scotts L2048 & L2548 and Sabre 1948GV & 1948HV Tractor models. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

• Replaces John Deere OEM# GX20250, GX20434, GX20819, GY20568
  
• Width: 2.50"
• Thick: .187"
  
• Center Hole: 11/16"
• Outer Holes: 3/8"
  
• Offset: 3/8"
• Air Lift: 1-3/16"