QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# 191-10817" Oregon Wavy Mulching Blade used on 48" John Deere L120 and L130 tractor models. Also used on Scotts L2048 & L2548 and Sabre1948GV &1948HV tractor models. The 191-108 blade is made from Boron Steel that allows for the perfect balance between durability and ductility. Replaces John Deere OEM# GX20250, GX20434, GX20819, GY20568 Length: 17"Width: 2.50"Thick: .164"Center Hole: 11/16"Outer Holes: 3/8"Offset: 1/4"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 92-104Oregon 17" Mulching Blade used on 48" John Deere Lawn Tractors and EZTrak models. The Oregon 100 Series Blades offers Ultra X-tended Cutting Length, which means that each blade delivers its maximum mulching capability per rotation.Replaces John Deere OEM# GX21784, GX21785, GY20852 Width: 2.75"Thick: .164"Center Hole: 7 Point StarOffset: 3/16"Requires: (3) for 48" (Check our Models & OEM Cross-Reference #'s section to find your model#)
Part# 91-62116-1/2" Oregon High Lift Blade used on several brands of 32" and 48" mower decks. Such as Bad Boy, Hustler, John Deere, Scag, Wright Stander and more. Oregon 91-621 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge.
Part# 92-61617" Oregon Gator G3 Mulching Blade used on 48" John Deere Lawn Tractors and EZTrak models. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.Replaces John Deere OEM# GX21784, GX21786, GY20852Width: 2.50"Thick: .187"Center Hole: 7 Point StarOffset: 3/4"Air Lift: 3/4"(Check our Models & OEM Cross-Reference #'s section to find your model#)
Part# 91-62318" Oregon Extended High Lift Blade used on 36"/52" Scag & Ferris models. Also used on various 36"/52" models, such as Bad Boy, Gravely, Husqvarna, Toro, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution
Part# 91-44716-9/16" Oregon High Lift Blade for the following 48" John Deere Lawn Tractors: 180, 240, 245, 260, 265, 285, 320, 335, and 345. Also used on Sabre 1848GV, 1848HV, 19484GV, 1948HV, 2048HV, and 2148HV Tractor models along with Scotts S2048 and S2348 models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 91-07917-1/16" Oregon High Lift Heavy Duty Blade used on 48" John Deere Quik-Trak & ZTrak models. Oregon has 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly.
Part# 92-67517" Oregon Gator G3 Mulching Blade used on 48" John Deere L120 & L130 and Scotts L2048 & L2548 Lawn Tractor models. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.Replaces John Deere OEM# GX20250, GX20434, GX20819, GY20568 Width: 2.50"Thick: .187"Center Hole: 11/16"Outer Holes: 3/8"Offset: 3/8"Air Lift: 1-3/16"(Check our Models & OEM Cross-Reference #'s section to find your model#)
Part# 96-30816-1/2" Oregon Gator G3 Mulching Blade used on 48" models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 91-07820-7/8" Oregon Medium Lift Heavy Duty Blade used on 60" John Deere models: 667 QuikTrak, 737, 757, 777, 797, 997, M665, Z520A, Z820A, Z830A, Z840A, Z850A, Z915B, Z915E, Z920Z, Z920M, Z925A, Z925M, Z930A, Z930M. Z930R, Z945M. Z950A, Z950M, Z950R, Z955M, Z960A, Z960M, Z960R, Z970R, Z994R, Z997, and Z997R. This Oregon OEM replacement lawn mower blade is made to the exact OEM specification for optimum performance.
Part# 396-70618-11/16" Oregon G6 Gator HD Mulching Blade used on 54" John Deere GS25, GS45 and GS75 Commercial Walk-behinds and John Deere F725 & F735 Front mounts. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 396-74325" Oregon G6 Gator Heavy Duty Mulching Blade used on 72" John Deere ZTrak Series, Compact Tractors and TerrainCut Front Mower models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# 396-73516-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on several brands of 48" mowers, from Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 396-73020-7/8" Oregon Gator G6 Heavy Duty Mulching Blade used on 60" John Deere Quik Trak & ZTrak models: 667,737, 757, 777, 797, 997, M665, Z520A, Z820A, Z830A, Z840A, Z850A, Z915B, Z915E, Z920Z, Z920M, Z925A, Z925M, Z930A, Z930M. Z930R, Z945M. Z950A, Z950M, Z950R, Z955M, Z960A, Z960M, Z960R, Z970R, Z994R, Z997, and Z997R. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# 396-73420-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 60" John Deere Front mount and Compact Tractor models: F1145, F1145, F910, F910-F935, F911, F912, F915, F930, F932, F935, 1050, 1070, 2305, 2320, 2520, 3 for 60", 3005, 3032E, 3036E, 3038E, 3120, 3320, 3520, 3720, 400, 400-455, 4005, 4100, 4120, 420, 425, 430, 4320, 445, 4520, 455, 4720, 650, 655, 670, 670-955. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# 396-77524-15/16" Oregon Gator G6 HD Mulching Blade used on various 72" John Deere X Series Tractors and Fairway Finishing models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
