You are here:Home > Blades > Oregon Blades > Ferris
We found 10 results matching your criteria.
15" Blades - (3) for 44" IS 1500Z 16-1/2" Blades - (2) for 32" cut; (3) for 48" cut 16-1/4" Blades - (3) for 48" cut
18" Blades - (2) for 36" cut; (3) for 52" cut 21" Blades - (3) for 61" cut 24-1/2" Blades - (3) for 72" cut
25" Blades - (3) for 72" cut
Sort By:
Page of 1
Oregon's 16-1/2" High Lift Blade 91-621 16-1/2" High Lift Blade

Part# 91-621
Each Price (6 or more): $12.25

16-1/2" Oregon High Lift Blade used on several brands of 32" and 48" mower decks. Such as Bad Boy, Hustler, John Deere, Scag, Wright Stander and more. Oregon 91-621 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205
  • Replaces Encore OEM# 483035
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 601123, 795797, 795797X, 606252, 606252X
  • Replaces John Deere OEM# TCU34166, AM104489
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 48110, 481706, 482461, 482877, A48184
  • Replaces Toro OEM# 107-3195, 107-3195-03, 107-3196, 107-3196-03, 110-0415, 110-0416, 110-0417
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 3.00"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $13.25
Oregon 18" High Lift Blade 91-623 18" High Lift Blade

Part# 91-623
Each Price (6 or more): $13.25


18" Oregon Extended High Lift Blade used on 36"/52" Scag & Ferris models. Also used on various 36"/52" models, such as Bad Boy, Gravely, Husqvarna, Toro, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 5021227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 363055, 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 481707, 482462, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Width: 3.00"
  • Thickness: .203"
  • Air Lift: 1-1/2" (Extended High Lift)
  • Center Hole: 5/8"
  • Requires (2) for 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $14.25
16-1/4" Gator G3 Mulching Blade 96-310 16-1/4" Gator G3 Mulching Blade

Part# 96-310
Each Price (6 or More): $15.95

16-1/4" Gator G3 Mulching Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203" high carbon steel
  • Requires: (3) per 48" deck
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching designs in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.95
16-1/2" Oregon Gator G3 Mulching Blade 96-308 16-1/2" Gator G3 Mulching Blade

Part# 96-308
Each Price (6 or More): $15.95

16-1/2" Oregon Gator G3 Mulching Blade used on 48" models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Air Lift: 1"
  • Requires: (2) for 32" or (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.95
24-1/2" Oregon High Lift HD Blade 92-035 24-1/2" High Lift HD Blade

Part# 92-035
Each Price (6 or more): $18.25

24-1/2" Oregon High Lift Heavy Duty Blade used on various 72" models. Such as Bad Boy, Hustler, Scag and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency.

  • Replaces Bad Boy OEM# 038-7220-00
  • Replaces Dixon OEM# 539119909
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 602857, 798702
  • Replaces Jacobsen OEM# 3970261
  • Replaces Scag OEM# 482788 482882
  • Replaces Toro OEM# 105-7784, 105-7784-03
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1-3/16"
  • Requires: (3) per 72"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $19.25
16-1/4" Oregon Gator G6 HD Mulching Blade 396-716 16-1/4" Gator G6 HD Mulching Blade

Part# 396-716
Each Price (6 or more): $19.95

16-1/4" Oregon Gator G6 HD Mulching Blade used on several brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (3) per 48"
  • For EMP T4 version use #29-905
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $20.95
Oregon 25" Medium Lift HD Blade 91-609 25" Medium Lift HD Blade

Part# 91-609
Each Price (6 or more): $20.50ea

25" Oregon Medium Lift HD Blade used on various 72" models. Such as Bobcat, Dixon, Husqvarna and more. Can also be used on Ventrac MS720 Frount Mount Finish Cut models. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results, and enhanced hardening to keep the blade sharper and more durable.

  • Replaces Bobcat/Ransome OEM# 112111-04, 42139B, WM142139B
  • Replaces Dixon OEM# 539105476
  • Replaces Ferris OEM# 22476, 5022476
  • Replaces Husqvarna OEM# 525341101, 539105476, 539105571, 574481401
  • Replaces Lastec OEM# P107, P701, P848, P849
  • Replaces Snapper OEM# 5102227
  • Replaces Ventrac OEM# 79.0105
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (3) per 72"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $21.50
16.5" Oregon Gator G6 HD Mulching Blade 396-735 16-1/2" Gator G6 HD Mulching Blade

Part# 396-735
Each Price (6 or more): $21.25

16-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on several brands of 48" mowers, from Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires: (2) per 32" or (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $22.25
396-764 Oregon 24-1/2" Gator G6 Mulching Blade 24-1/2" Gator G6 HD Mulching Blade

Part# 396-764
Each Price (6 or more): $30.95

24-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on various 72" models. Such as Bad Boy, Ferris, Hustler, Jacobsen, Scag and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

  • Replaces Bad Boy OEM# 038-7220-00
  • Replaces Ferris OEM# 481709
  • Replaces Exmark OEM# 1-643097, 103-2521-S
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 798710, 798728
  • Replaces Jacobsen OEM# 3970261
  • Replaces Scag OEM# 482694, 482882
  • Replaces Spartan OEM# 438-0003-00
  • Replaces Toro OEM# 105-7784-03, 110-0624-03
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 72" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $31.95
396-731 Oregon 25" Gator G6 HD Mulching Blade 25" Gator G6 Mulching Blade

Part# 396-731
Each Price (6 or more): $35.75

25" Oregon Gator G6 Heavy Duty Mulching Blade used on various 72" Husqvarna, Ferris, and Snapper models. Can also be used on Ventrac MS720 Frount Mount Finish Cut models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Up to twice the cutting length for increased cutting efficiency with each revolution.

  • Replaces Bobcat/Ransome OEM# 112111-04, 42139B, WM142139B
  • Replaces Dixon OEM# 539105476
  • Replaces Ferris OEM# 5022476, 5102227S
  • Replaces Husqvarna OEM# 539110745, 574481401, 574860902
  • Replaces Snapper OEM# 5102227SYP, 7046625, 7046625YP
  • Replaces Ventrac OEM# 79.0105
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 72"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $36.75