You are here:Home > Blades > Oregon Blades > BadBoy
We found 9 results matching your criteria.
14-1/2" Blades - (3) for 42" cut 16-1/4"- (3) For 48" Cut 18" Blade- (2) For 36" Cut
20-1/2" Blade- (3) For 60" Cut 21" Blade - (3) for 61" deck 24-1/2" Blade - (3) For 72" Cut
Sort By:
Page of 1
18" Oregon Medium Lift Blade 91-622 Oregon's 16-1/2" High Lift Blade 91-621 Oregon's 18-3/4" Gator G3 Mulching Blade 96-803
Part# 91-622
Each Price (6 to 29): $10.95
Each Price (30 or More): $10.45


18" Oregon Medium Lift Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 1-633482, 103-2528, 1-306283, 103-6584
  • Replaces Ferris OEM# 5021227, 5021227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-621
Each Price (6 to 29): $12.25
Each Price (30 or More): $11.75

16-1/2" Oregon High Lift blade that's used on several brands of 32" and 48" mower decks. Oregon® 91-621 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge. X-Tended Cutting Length
optimizes the cutting efficiency with each revolution.
  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205
  • Replaces Encore OEM# 483035
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 601123, 795797, 795797X, 606252, 606252X
  • Replaces John Deere OEM# TCU34166, AM104489
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 48110, 481706, 482461, 482877, A48184
  • Replaces Toro OEM# 107-3195, 107-3195-03, 107-3196, 107-3196-03, 110-0415, 110-0416, 110-0417
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 3.00"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 96-803
Each Price (6 or more): $12.95


Oregon's 18-3/4" Gator G3 Mulching Blade for 54" decks on Bad Boy mowers, Exmark Quest's and Toro Titan or Timecutter. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Bad Boy OEM# 038-0003-00
  • Replaces Exmark OEM# 115-4999-03
  • Replaces Toro OEM# 115-4999-03
  • Length: 18-3/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203" high carbon steel
  • Requires (3) per 54" deck
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)
Oregon's 16-1/4" G3 Gator Mulching Blade 96-310 Oregon's 20-1/2" Medium Lift HD Blade 94-055 Oregon's 16-1/4" G6 Gator Mulching Blade 396-716
Part# 96-310
Each Price (6 or More): $13.95

Oregon's 16-1/4" G3 Gator Mulching Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203" high carbon steel
  • Requires (3) per 48" deck
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 94-055
Each Price (6 or more): $14.95

Oregon's 20-1/2" Medium Lift Heavy Duty Blade is
used on various mower brands with 60" mower decks. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution
  • Replaces Bad Boy OEM# 038-6060-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 603992, 603995, 608271, 607280
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Replaces Windsor OEM# 50-2814
  • Length: 20-1/2"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require: (3) for 60" deck
  • For our EMP version use EMP# 26-020
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-716
Each Price (6 or more): $19.95

Oregon's 16-1/4" G6 Gator HD Mulching Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 3.00"
  • Blade Thickness: .250" high carbon steel
  • Requires (3) per 48" deck
  • High Lift for plenty of vacuum
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)
Oregon's 20-1/2" G6 Gator Mulching Blade 396-740 Oregon's 21" G6 Gator HD Mulching Blade 396-727 Oregon's 24-1/2" G6 Gator Mulching Blade 396-764
Part# 396-740
Each Price (6 or more): $23.85

Oregon's 20-1/2"
Gator G6 Heavy Duty Mulching Blade for several different brands of 60" mowers, from older Bad Boy, Gravely, Hustler, Toro, and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Excel OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Replaces Windsor OEM# 51-2805, 51-2800
  • Length: 20-1/2"
  • Center hole: 5/8"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Requires: (3) per 60" deck or (2) for 42" (Hustler/Excel 42" mowers only)
  • For our EMP version use part# 29-978
  • For Sunbelt Predator version use part# B1PD5009
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-727
Each Price (6 or more): $24.95

Oregon's 21" G6 Gator Heavy Duty Mulching Blade for several different brands of 61" mowers, from Bad Boy, Gravely, Ferris, Scag, Wright Mfg and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Bad Boy OEM# 038-6082-00, 038-6091-00
  • Replaces Bobcat OEM# 42180B, WM142180B
  • Replaces Bunton OEM# PC005
  • Replaces Encore OEM# 823006
  • Replaces Ferris OEM# 15208425, 5020842
  • Replaces Giant Vac OEM# 3021538
  • Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
  • Replaces Hustler OEM# 795252
  • Replaces Husqvarna OEM# 539105711
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
  • Replaces Snapper OEM# 5101755BMYP
  • Replaces Wright Stander OEM# 71440003, 71490003
  • Length: 21"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (3) for 61" deck
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-764
Each Price (6 or more): $29.95

Oregon's 24-1/2" Gator G6 HD Mulching Blade for various 72" Decks on several different brands of mowers. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length optimizes the cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Bad Boy OEM# 038-7220-00
  • Replaces Ferris OEM# 5022476
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 603992, 603995, 608271, 607280
  • Replaces Jacobsen OEM# 3970261
  • Replaces Scag OEM# 481709
  • Replaces Spartan OEM# 438-0003-00
  • Replaces Toro OEM# 105-7784, 105-7784-03, 108-1120
  • Replaces Windsor OEM# 50-3435
  • Length: 24-1/2"
  • Center hole: 5/8"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Requires (3) per 72" deck
  • High Lift for plenty of vacuum
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)