|
|
|
|
|
|
|
|
|
|
|
Part# 82-111
Oregon's Replacement Spindle Assembly for Emark Quest E & S Series mower models. Also fits on Toro TimeCutter 4200, 5000, 4216, 4235, 4260 and 5060 Series mowers. Oregon spindles will meet or exceed OEM standards every time, giving you a stronger start to the season.- Replaces Exmark OEM# 117-7439, 121-0751
- Replaces Toro OEM# 117-7267, 117-7267, 117-7268, 117-7439, 121-0751
- Height: 5-1/2"
- For replacement bearing use EMP part# 45-257
(May NOT fit all models- Check product description for exact OEM Part # match)
|
Part# 82-102
Oregon's Replacement Spindle Housing with Bearings (Shaft not Included)
for Exmark Lazer Z
E & S Series, Pioneer S Series, Radius X Series, Staris E & S
Series, Turf Tracer S & X Series, and Vantage
S & X Series Mowers. Oregon spindles will meet or exceed OEM
standards every time, giving you a stronger start to the season.- Replaces Exmark OEM## 116-3344
- OD: 6-1/2"
- Height: 4-1/2"
- Does Not Include Shaft
(May NOT fit all models- Check product description for exact OEM Part # match)
|
Part# 82-022
Replacement Spindle Housing Assembly (Bearing and Dust Covers ONLY).
Used on all sort of various 36", 44", 48" and 52" Exmark mower models
such as: Lazer Z CT, HP, XP and XX, the Phazer Series, several different
Metro Series models, also used on Turf Tracer S, and X Series. Lastly
used on Viking Hydro series.
- Replaces Exmark OEM# 103-2548, 1-634619, 1-323532, 103-8280
- Housing, Bearings and Covers Only, Does not include spindle shaft or pulley
- For replacement bearings use EMP part# 45-263
- Height: 3-3/4"
(May NOT fit all models- Check product description for exact OEM Part # match)
|
|
|
|
|
|
|
|
|
|
|
|
|
Part# 82-103
Oregon's Replacement Spindle Assembly for Exmark Radius E Series models:
RAE702 (S/N# 404,314,159 and up), RAE708, RAE720, RAE740 Series. Also
used on Radius S Series models: RAS651 (S/N# 408,644,346 and up), RAS691
(S/N# 408,644,346 and up), RAS708, RAS710 (S/N# 400,000,000 and up),
RAS720, RAS730 (S/N# 408,644,346 and up), RAS740 (S/N# 400,000,000 and
up). Oregon spindles will meet or exceed OEM
standards every time, giving you a stronger start to the season.- Replaces Exmark OEM## 126-4630
- Height: 4-1/2"
- Cutter Housing Complete (includes Spindle pulley nut)
(May NOT fit all models- Check product description for exact OEM Part # match)
|
Part# 82-306
Replacement Spindle Assembly for Snapper/Kees & Ransomes/Bobcat 32"
& 36" deck modes that use Short Shaft spindles. Also used on older
Exmark 5 Speed Walkbehind models.
- Replaces Snapper/Kees OEM# 362024, 5-9759, 7-6379
- Replaces Bobcat/Ransome OEM# 36006N
- Replaces Exmark OEM# 302030, 1-302030
- Height: 5-3/16"
- Inside Shaft Diameter: 5/8"
- Outside Shaft Diameter: 1"
- Include grease zerk
(May NOT fit all models- Check product description for exact OEM Part # match)
|
Part# 82-347
Oregon's Replacement Spindle Assembly that are used on older Exmark Turf
Tracer & Lazer Z XP models with 60" Decks and Serial Numbers between
320,000 - 351,999.
Oregon replacement parts are built to
meet or
exceed OEM standards.- Replaces Exmark OEM# 103-3200, 103-8075
- Includes Pulley (Pulley OD: 6.3")
- Height: 6-1/2"
- For replacement bearing use EMP part# 45-263
(May NOT fit all models- Check product description for exact OEM Part # match)
|
|
|
|
|
|
|
|
|
|
|
|
|
Part# 82-307
Replacement Spindle Assembly for Snapper/Kees & Ransomes/Bobcat 48"
deck modes that use Long Shaft spindles. Also used on older
Exmark 5 Speed Walkbehind models.
- Replaces Snapper/Kees OEM# 5-9964, 7-6645, 7059964, 7059964YP, 7079964
- Replaces Bobcat/Ransome OEM# 36082N
- Replaces Exmark OEM# 402006, 1-402006
- Height: 6-1/4"
- Inside Shaft Diameter: 5/8"
- Outside Shaft Diameter: 1"
(May NOT fit all models- Check product description for exact OEM Part # match)
|
Part# 82-349
Replacement Spindle Assembly that fits on older 72" Exmark Lazer Z models with Serial numbers 260,000 to 351,999.
- Replaces Exmark OEM# 1-644092
- Includes 8" Pulley, blade bolt and washer
- Height: 6-3/4"
(May NOT fit all models- Check product description for exact OEM Part # match)
|
Part# 82-346
Oregon's Replacement Spindle Assembly that fit older 52" Exmark Lazer Z HP models with Serial numbers 260,000 & Above.
Oregon replacement parts are built to
meet or
exceed OEM standards.- Replaces Exmark OEM# 103-1184
- Includes Pulley
- Height: 6-1/2"
- For replacement bearing use EMP part# 45-263
(May NOT fit all models- Check product description for exact OEM Part # match)
|
|
|
|
|
|
|
|
|
|
|
|
|
Part# 82-344
Oregon's Replacement Spindle Assembly that fit older 52" & 60"
Exmark Lazer Z models with Serial numbers 320,000 -- 369,999.
Oregon replacement parts are built to
meet or
exceed OEM standards.- Replaces Exmark OEM# 103-1140
- Includes Pulley
- Height: 7"
- For replacement bearing use EMP part# 45-263
(May NOT fit all models- Check product description for exact OEM Part # match)
|
Part# 82-348
Replacement Spindle Assembly that fits on older 72" Exmark Lazer Z XP Series models with Serial numbers 352,000 to 539,999.
- Replaces Exmark OEM# 103-3206, 103-8323
- Includes 8" Pulley, blade bolt and washer
- Height: 6-3/4"
(May NOT fit all models- Check product description for exact OEM Part # match)
|
Part# 82-362
Replacement Spindle Assembly that fit on Exmark 48" Lazer CT and 48" Lazer HP models.
- Replaces Exmark OEM# 103-9078, 103-9081
- Includes 6-5/16" Pulley, blade bolt and washer
- Includes grease zerk
- Height: 7-3/8"
(May NOT fit all models- Check product description for exact OEM Part # match)
|
|
|
|
|
|
|
|
|
Part# 82-361
Oregon's Replacement Spindle Assembly for Exmark LZD, LZDS, LZS, LZX and
LZZ Series mowers. Spindle assembly includes the blade and pulley
mounting hardware (pulley not included). Oregon replacement parts are
built to meet or exceed OEM standards.- Replaces Exmark OEM# 109-2102, 109-6917
- Height: 7-1/2"
(May NOT fit all models- Check product description for exact OEM Part # match)
|
|