QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# 28-167 Each Price (6 or More): $11.25 Each Price (30+): $10.7516-1/4" EMP Wavy Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. With EMP brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. This standard wavy mulching blade replaces the Exmark and Toro mulch kit blades and all the aftermarket brands. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 91-368 Each Price (6 or More): $15.9516-1/4" Oregon Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. X-Tended Cutting Length™ optimizes the cutting efficiency and an enhanced mulching for bagging and discharge efficiency.
Part# 92-026 Each Price (6 or More): $13.8516-1/4" Oregon Wavy Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. The Oregon mulching blade lawn mower blade is created to provide consistency and longevity, while delivering a cleaner cut and quality results.
Part# B1EM1815 Each Price (6 or more) $11.9516-1/4" XHT Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.
Part# B1EM1810 Each Price (6 or More): $14.9017-29/32" XHT Wavy Mulching Blade for older 36" and 52" Exmark mower models. But it can also replace several other brands of mowers with the same deck sizes, such as: Ariens/Gravely, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. XHT blades also offer greater impact toughness.
Part# 191-108 Each Price (6 or More): $8.9517" Oregon Wavy Mulching Blade used on 48" John Deere L120 and L130 tractor models. Also used on Scotts L2048 & L2548 and Sabre1948GV &1948HV tractor models. The Oregon 100 Series Blades offers Ultra X-tended Cutting Length, which means that each blade delivers its maximum mulching capability per rotation. Add that with our double bevel technology and the overall blade noise is reduced by up to 1.5 decibels. The 191-108 blade is made from Boron Steel that allows for the perfect balance between durability and ductility. Replaces John Deere OEM# GX20250, GX20434, GX20819, GY20568 Length: 17"Width: 2.50"Thick: .164"Center Hole: 11/16"Outer Holes: 3/8"Offset: 1/4"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 92-104 Each Price (6 or More): $10.95Oregon 17" Wavy Mulching Blade for 48" Decks on the following John Deer Tractors: D140, D155, D160, E140, E150, E160, E170, LA120, LA130, LA140, LA145, LA155, LA165, X105, X140, X165, and X166 models. But also used on the following EZTrak models: Z245, Z255, and Z355E. The Oregon 100 Series Blades offers Ultra X-tended Cutting Length, which means that each blade delivers its maximum mulching capability per rotation. Add that with our double bevel technology and the overall blade noise is reduced by up to 1.5 decibels.Replaces John Deere OEM# AM137757, AM137758, AM141035, AM141036, GX21784, GX21785, GX21786, GY20852 Length: 17"Width: 2.75"Thick: .164"Center Hole: 7 Point StarOffset: 3/16"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-335 Each Price (6 or More): $14.9518" Oregon Wavy Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. The Oregon wavy mulching blade delivers a cleaner cut and quality results.
Part# 28-187 Each Price (6 or More): $11.75 Each Price (30+): $11.2518" EMP Wavy Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Staris, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn.
Part# 28-618 Each Price (6 or More): $11.95 Each Price (30+): $11.4518" EMP Wavy Mulching Blade used on various 36" & 52" models. Such as Bad Boy, Bobcat, Exmark, Ferris, Gravely, John Deere, Scag, Toro, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 92-027 Each Price (6 or More): $12.9518" Oregon Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Staris, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. The Oregon wavy mulching blade delivers a cleaner cut and quality results. Oregon replacement lawn mower blades are made to the exact OEM specification for optimum performance.
Part# 96-309 Each Price (6 or More): $18.2519-1/2" Oregon Gator G3 Mulching Blade used on 38" John Deere LT150, LT155, LT160, LT166, LT180, LX172, LX173, LX176, LX178, LX186, LX188, RX63, RX73, RX75, RX95, SX75, SX95, SRX75, SRX95, STX30 and STX38 Lawn Tractor models. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly.
Part# 92-028 Each Price (6 or More): $16.3520-1/2" Oregon Wavy Mulching Blade used on 60" Exmark and new Toro models only and that use the large center hole and require a splined blade bushing. The Oregon wavy mulching blade delivers a cleaner cut and quality results. Oregon replacement lawn mower blades are made to the exact OEM specification for optimum performance. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# 28-620Each Price (6 to 29): $11.75 Each Price (30 or more): $11.2520-1/2" EMP Wavy Mulching Blade used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Huster, Toro and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 28-120 Each Price (6 or More): $12.50Each Price (30+): $12.0020-1/2" EMP Wavy Mulching Blade used on 60" Exmark Lazer Z, Radius, Turf Tracer models and more. Also used on new Toro Z Master & GrandStand models with 15/16" center holes with a splined blade bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. This standard wavy mulching blade replaces the Exmark and Toro mulch kit blades and all the aftermarket brands. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 91-311Each Price (6 or more): $14.5020-1/2" Oregon Wavy Mulching Blade used on 60" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Hustler, Toro and more. The Oregon replacement lawn mower blade is made to the exact OEM specification for optimum performance. Our blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# B1EM1800Each Price (6 or More): $14.1520-1/2" XHT Wavy Mulching Blade used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Huster, Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges and more resistance to bending.
Part# B1PD5041 Each Price (6 or More): $17.9021" Predator Heavy Duty Mulching Blade used on 60" John Deere ZTrak models: 667 QuikTrak, 737, 757, 777, 797, 997, M665, Z520A, Z820A, Z830A, Z840A, Z850A, Z915B, Z915E, Z920Z, Z920M, Z925A, Z925M, Z930A, Z930M. Z930R, Z945M. Z950A, Z950M, Z950R, Z955M, Z960A, Z960M, Z960R, Z970R, Z994R, Z997, and Z997R. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.
Part# 28-621 Each Price (6 or More): $11.95 Each Price (30+): $11.4521" EMP Wavy Mulching Blade used on various 61" models. Such as Ariens, Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. Most customers prefer our brand of blades over all the aftermarket brands.
Part# B1EP1023 Each Price (6 or More): $10.9521" XHT Mulching Blade used on most 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Poulan Pro, Jonsered, McCulloch, Redmax, and Weedeater.
Part# B1MA2414 Each Price (6 or More): $11.9521-3/16" XHT OE Mulching Blade used on most 42" MTD Lawn Tractor (Stamped deck) models: Bolens, Craftsman, Cub Cadet, Murray, Troybilt, Yardman and Yard Machine. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.
Part# B1PD2015Each Price (6 or More): $19.9524-1/2" Predator Series HD Mulching Blade used on various 72" models. Such as Bad Boy, Ferris, Gravely, Hustler, Scag and more. Predator blades offer superior mulching capabilities over traditional mulching blades. The airflow tooth design increases blade strength while producing more airflow for smaller clippings. Predator blades have all the same benefits as XHT (Xtreme Hardness & Toughness) blades.
Part# 92-084Each Price (6 or More): $15.9524-1/2" Oregon Wavy Mulching Blade used on 72" Exmark and new style Toro models, that use the large center hole and require a splined blade bushing. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
Part# 53242850026" Genuine OE Mulching Blade used on Weed Eater WE261 models: 96022000702, 96022000703, 96022000801, 96022000802, 96022000902, 96022001002, 96022001101, 96022001102, 96022001103, 96022001104, 96024000101, 96024000102, 96024000103, 96024000201, 96024000202, 96028000102, 96028000103 and 96028000104.
