You are here:Home > Blades > Blades by Lift Type > T4 Mulcher Blades
We found 77 results matching your criteria.
Sort By:
Page of 3
14-1/2" Oregon Gator G3 Mulching Blade 96-303 14-1/2" Gator G3 Mulching Blade

Part# 96-303

Each Price (6 or more): $16.95

14-1/2" Oregon Gator G3 Mulching Blade used on older Dixon 42" models. Increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
  • Replaces Dixon OEM# 13938, 8688, 539119853, 539126275
  • Length: 14-1/2"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 11/16"
  • Air Lift: 1"
  • Require (3) for 42" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.95
15" Predator Series HD Mulching Blade B1PD5144 15" Predator HD Mulching Blade

Part# B1PD5144
Each Price (6 or More): $15.95


15" Predator Series Heavy Duty Mulching Blade for 44" Ferris IS500Z and IS1500Z mower models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Ferris OEM# 5061827, 5061827S, 5061827YP
  • Length: 15"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 44" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $16.95
15-1/2" Predator Mulching Blade B1PD5051 15-1/2" Predator Mulching Blade

Part# B1PD5051
Each Price (6 or More): $16.35

15-1/2" Predator Series Mulching Blade
used on various Toro 44" decks such as TimeCutter Z, TimeCutter ZX440, Proline Walk-behind w/ SFS Side Discharge, Pro Lawn Tractor, Z149 Z Master, and Groundsmaster 117 and 1144 models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Toro OEM# 106-0627, 106-0630, 54-0010, 54-0010-03, 54-0010-09, 55-4940
  • Length: 15-1/2"
  • Width: 2.50"
  • Thickness: .197"
  • Center hole: 5/8"
  • Requires (3) per 44" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.35
16-1/2" Oregon Gator G3 Mulching Blade 96-308 16-1/2" Gator G3 Mulching Blade

Part# 96-308
Each Price (6 or More): $13.95

16-1/2" Oregon Gator G3 Mulching Blade for several different brands of 32" and 48" mowers, from Bad Boy, Gravely/Great Dane, Scag, Toro, Wright Mfg and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Length: 16-1/2"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Requires: (2) for 32" or (3) per 48" deck
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.95
16-1/2" EMP T4 HD Mulching Blade 29-912 16-1/2" T4 HD Mulching Blade

Part# 29-912
Each Price (6 to 29): $12.65
Each Price (30 or More): $12.15

16-1/2" EMP T4 Heavy Duty Mulching Blade for several different brands for several different brands of 32" and 48" mowers, from Bad Boy, Gravely/Great Dane, Scag, Toro, Wright Mfg and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Length: 16-1/2"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Requires: (2) for 32" or (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.65
16-1/4"  Predator HD Mulching Blade B1PD5005 16-1/4" Predator HD Mulching Blade

Part# B1PD5005
Each Price (6 or more): $13.25

16-1/4" Predator Series HD Mulching Blade for several brands of 32" and 48" Mower decks. Used on Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4820-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 48" deck or (2) per 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.25
16-1/4" Gator G3 Mulching Blade 96-310 16-1/4" Gator G3 Mulching Blade

Part# 96-310
Each Price (6 or More): $13.95

16-1/4" Gator G3 Mulching Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203" high carbon steel
  • Requires (3) per 48" deck
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.95
16-1/4" Oregon Gator G3 Mulching Blade 96-321 16-1/4" Gator G3 Mulching Blade

Part# 96-321
Each Price (6 or More): $13.50

16-1/4" Oregon Gator G3 Mulching Blade for 32" & 48" decks but also used on 46" Triton mower decks that use the large center hole and require a splined blade bushing. Also used on new Toro 48" models (be sure to check the Center Hole size). Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
  • Replaces Toro OEM# 109-6873
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Require (3) for 48" & (3) for 46" Triton & (2) for 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $14.50
16-1/4" Oregon Gator G6 HD Mulching Blade 396-321 16-1/4" Gator G6 Mulching HD Blade

Part# 396-321
Each Price (6 or More): $17.50

16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade for 32" & 48" decks but also used on 46" Triton mower decks that use the large center hole and require a splined blade bushing. Also used on new Toro 48" models (be sure to check the Center Hole size). Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
  • Replaces Toro OEM# 109-6873
  • Length: 16-1/4"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 15/16"
  • Require (3) for 48" & (3) for 46" Triton & (2) for 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)


Each Price $18.50
16-1/4" EMP T4 Mulcher HD Blade 29-905 16-1/4" T4 HD Mulching Blade

Part# 29-905
Each Price (6 to 29): $12.50
Each Price (30 or More):
$12.00

16-1/4" EMP T4 Heavy Duty Mulching Blade for several brands of 32" & 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4827-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-2527, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 21537, 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Requires (2) for 32" deck or (3) per 48" deck
  • For our Standard version use EMP# 29-005
  • Made in the USA in ISO 9001 certified plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.50
16-5/8" Oregon Gator G5 Mulching Blade 592-124 16-5/8" G5 Gator Mulching Blade

Part# 592-124
Each Price (6 or more) $15.95

16-5/8" Oregon Gator G5 Mulching Blade for RCK48, RCK48GR, RCK48P deck models used on various 48" Kubota mowers. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Lengthô optimizes the cutting efficiency with each revolution. Itís not a replacement blade, Itís an upgrade.

  • Replaces Kubota OEM# K5576-34340, K5915-34360, K5915-97530
  • Length: 16-5/8"
  • Center hole: 7/8"
  • Blade Width: 3.00"
  • Blade Thickness: .203"
  • Offset: 5/8"
  • Requires (3) per 48" deck
  • High Lift for plenty of vacuum
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $16.95
17" Predator Series HD Mulching Blade B1PD2007 17" Predator HD Mulching Blade

Part# B1PD2007
Each Price (6 or More): $15.35

17" Predator Series Heavy Duty Mulching Blade
for various brands using 32" & 50" mower decks, such as Dixie Chopper, Dixon, Gravely, and Husqvarna. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50X
  • Replaces Dixon OEM# 539129743
  • Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
  • Replaces Husqvarna OEM# 581055501
  • Replaces Toro OEM# 11-3579, 11-3579-09
  • Length: 17"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 32" or (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.35
Oregon's 17" Gator G3 Mulching Blade 96-323 17" Gator G3 Mulching Blade

Part# 96-323
Each Price (6 or More): $14.95

Oregon's 17" Gator G3 Mulching Blade for various brands using 32" & 50" mower decks. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V
  • Replaces Dixon OEM# 539129743
  • Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
  • Replaces Husqvarna OEM# 581055501
  • Replaces Toro OEM# 11-3579, 11-3579-09
  • Length: 17"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 32" or (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.95
17" Oregon Gator G3 Mulching Blade 90-669 17" Gator G3 Mulching Blade

Part# 90-669

Each Price (6 or more): $20.45

17" Oregon Gator G3 Mulching Blade used on older Dixon 50" models: ZTR 4423, ZTR 4425, ZTR 4426, ZTR 4515B, ZTR 4516K, ZTR 4518K, ZTR 5004, ZTR 5005, ZTR 5017, ZTR 5020, ZTR 5022, ZTR 5023, ZTR 5024, and ZTR 5502. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
  • Replaces Dixon OEM# 539117174, 539119863
  • Length: 17"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 11/16"
  • Air Lift: 3/4"
  • Require (3) for 50" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $21.45
Oregon 17" Gator G3 Mulching Blade 92-616 17" Gator G3 Mulching Blade

Part# 92-616
Each Price (6 or More): $12.95

17" Gator G3 Mulching Blade for 48" Decks on the following John Deer Tractors: D140, D155, D160, E140, E150, E160, E170, LA120, LA130, LA140, LA145, LA155, LA165, X105, X140, X165, and X166 models. But also used on the following EZTrak models: Z245, Z255, and Z355E. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that youíre buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results. Itís not a replacement, itís an upgrade.

  • Replaces John Deere OEM# AM137757, AM137758, AM141035, AM141036, GX21784, GX21785, GX21786, GY20852
  • Length: 17"
  • Width: 2.50"
  • Thick: .187"
  • Center Hole: 7 Point Star
  • Offset: 3/4"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $13.95
17" Oregon  Gator G3 Mulching Blade 92-675 17" Gator G3 Mulching Blade

Part# 92-675
Each Price (6 or More): $13.95

17" Oregon Gator G3 Mulching Blade for 48" Decks on the following John Deer Tractors: L120 and L130 models. But also used on Scotts tractor L2048 and L2548 models. Along with Sabre Yard Tractors 1948GV and 1948HV models. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that youíre buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results. Itís not a replacement, itís an upgrade.

  • Replaces John Deere OEM# GX20250, GX20434, GX20819, GY20568
  • Length: 17"
  • Width: 2.50"
  • Thick: .187"
  • Center Hole: 11/16"
  • Outer Holes: 3/8"
  • Offset: 3/8"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $14.95
17" Oregon Gator G6 HD Mulching Blade 392-139 17" Gator G6 HD Mulching Blade

Part# 392-139

Each Price (6 or More): $23.95

17" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Cub Cadet models: Enforcer 48, PRO HW 300 348 (2018-2022), PRO X 600 KW 648 (2020-2022), PRO Z 100 EFI 148-L (2016-2019), PRO Z 100 EFI 148-S (2016-2022), PRO Z 500 KW 548-L (2018), RECON 48, Tank L48KH LZ48, SZ48, Z-Force L48 (2013-2018), Z-Force LX48 KW (2016-2019), Z-Force LZ48 (2014-2015), Z-Force S 48 (2013), Z-Force S48 (2018-2019), Z-Force SX48 KW (2016-2022), Z-Force SZ48 KH FAB (2016-2021). Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Cub Cadet OEM# 01005336, 02005017, 742-04417, 942-04417, 942-04417-X
  • Length: 17"
  • Width: 3.00"
  • Thick: .250"
  • Center Hole: 3/4
  • Offset: 7/16"
  • Air Lift: 1"
  • Requires: (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $24.95
17-1/16" Oregon Gator G6 HD Blade 396-770 17-1/16" Gator G6 HD Mulching Blade

Part# 396-770
Each Price (6 or More): $17.95

17-1/16" Oregon Gator G6 Heavy Duty Blade for 48" 7 Iron decks on the following John Deere models: QuikTrak 647, and 647A or ZTrak Z510A, Z540R, Z545R, Z645, Z710, Z720E, Z735M, Z740R, Z810A, Z820A, Z910A, Z915B, Z915E, Z920A, Z920M, and Z920R. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces John Deere OEM# M136194, TCU14939, TCU18678, TCU21475, TCU30315
  • Length: 17-1/16"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 7/8"
  • Offset: 1/2"
  • Requires (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.95
17-3/64" Predator Series HD Blade B1PD5138 17-3/64" Predator HD Mulching Blade

Part# B1PD5138
Each Price (6 or More): $16.95

17-3/64" Predator Series Heavy Duty Blade for 48" 7 Iron decks on the following John Deere models: QuikTrak 647, and 647A or ZTrak Z510A, Z540R, Z545R, Z645, Z710, Z720E, Z735M, Z740R, Z810A, Z820A, Z910A, Z915B, Z915E, Z920A, Z920M, and Z920R. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces John Deere OEM# M136194, TCU14939, TCU18678, TCU21475, TCU30315
  • Length: 17-3/64"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 29/32 or 7/8"
  • Requires (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.95
17-7/8" Oregon Gator G3 Mulching Blade 96-318 17-7/8" Gator G3 Mulching Blade

Part# 96-318
Each Price (6 or More): $16.25

17-7/8" Oregon Gator G3 Mulching Blade used on 36"/52" Hustler Z, Mini Z, Raptor Series, Sport, Super S, Super Z and X-One models. Does Not fit the 36" Trimstar walk-behind. Also used on 36"/52" Big Dog Models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Hustler/Excel OEM# 782532, 785436, 794198, 787721
  • Length: 17-7/8"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $17.25
17-7/8" Gator G6 HD Mulching Blade 396-704 17-7/8" Gator G6 HD Mulching Blade

Part# 396-704
Each Price (6 or More): $17.95

Oregon's 17-7/8" Gator G6 HD Mulching Blade for 52" mower decks on Hustler and Big Dog models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Hustler/Excel OEM# 782532, 785436
  • Length: 17-7/8"
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.95
18" Predator Series HD Mulching Blade B1PD5008 18" Predator HD Mulching Blade

Part# B1PD5008
Each Price (6 or More): $14.53

18" Predator Series HD Mulching Blade is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.53
18" Oregon Gator G3 Mulching Blade 93-601 18" Gator G3 Mulching Blade

Part# 93-601
Each Price (6 or More): $16.98

18" Oregon Gator G3 Mulching Blade used on 36" or 52" Bobcat XM Series mowers. Can also be used on 52" Wright Stander X, and Sport X models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Bobcat OEM# 112111-02, 2722543-02
  • Replaces Wright Mfg OEM# 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Offset: 1/2"
  • Requires (2) for 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.98
18" Oregon Gator G3 Mulching Blade 96-329 18" Gator G3 Mulching Blade

Part # 96-329

Each Price (6 or More): $17.25

18" Oregon Gator G3 Mulching Blade for 52" Grasshopper Front Mount and M152 Mid Mount deck models. Can also be used on Woods mower decks. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
  • Replaces Grasshopper OEM# 320321
  • Replaces Woods OEM# 70104KT, 70117KT, 72505KT, 72896KT, 72897KT, 72904KT
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 1/2"
  • Offset: 5/16"
  • Requires (3) for 52" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.25
18" G3 Gator Mulching Blade 96-344 18" Gator G3 Mulching Blade

Part# 96-344
Each Price (6 or More): $14.85

Oregon's 18" Gator G3 Mulching Blade is used on several brands of 36" and 52" mower models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.85
18" Oregon Gator G3 Mulching Blade 96-322 18" Gator G3 Mulching Blade

Part# 96-322
Each Price (6 or More): $13.75

18" Oregon Gator G3 Mulching Blade for 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Exmark OEM# 103-6397, 116-5175
  • Replaces Toro OEM# 109-6873
  • Length: 18"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Requires (2) per 36" cut or (3) per 52" cut
  • One of the most popular mulching design in commercial mowing
  • Try our own EMP version #29-718
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.75
18" Oregon Gator G6 HD Mulching Blade 396-729 18" Gator G6 HD Mulching Blade

Part# 396-729

Each Price (6 or More): $21.95

18" Oregon Gator G6 Heavy Duty Mulching Blade for 52" Grasshopper Front Mount and M152 Mid Mount deck models. Can also be used on Woods mower decks. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
  • Replaces Grasshopper OEM# 320321
  • Replaces Woods OEM# 70104KT, 70117KT, 72505KT, 72896KT, 72897KT, 72904KT
  • Length: 18"
  • Width: 3.00"
  • Thickness: .250"
  • Center Hole: 1/2"
  • Offset: 5/16"
  • Requires (3) for 52" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $22.95
18" Oregon Gator G6 HD Mulching Blade 396-322 18" Gator G6 HD Mulching Blade

Part# 396-322
Each Price (6 or More): $18.45

18" Oregon Gator G6 Heavy Duty Mulching Blade for 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Exmark OEM# 103-6397, 116-5175
  • Replaces Toro OEM# 109-6873
  • Length: 18"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires (2) per 36" cut or (3) per 52" cut
  • One of the most popular mulching design in commercial mowing
  • Can use our EMP version #29-718
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $19.45
18" EMP T4 Heavy Duty Mulching Blade  29-945 18" T4 HD Mulching Blade

Part# 29-945
Each Price (6 to 29): $12.25
Each Price (30 or More): $11.75

18" EMP T4 Heavy Duty Mulching Blade used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For our standard version use EMP# 29-045
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.25
18" EMP T4 Mulching HD Blade 29-718 18" T4 HD Mulching Blade

Part# 29-718
Each Price (6 or More): $12.50
Each Price (30+): $12.00

18" EMP T4 Mulching Heavy Duty Blade for 36" & 52" Exmark models Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro models that use the large center hole and require a spline blade bushing. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Exmark OEM# 116-5175, 116-5175-S, 103-6392-S, 103-6397-S
  • Replaces Encore OEM# 543293
  • Replaces Toro OEM# 109-6873-03, 140-1242
  • Length: 18"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 15/16"
  • Require (2) for 36" deck or (3) for 52" deck
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.50