You are here:Home > Blades > Blades by OEM Brand > Simplicity
We found 16 results matching your criteria.
    For Simplicity 32", 36", 48" and 52" decks see Snapper 16-1/4", 16-1/2" & 18" Blades
Sort By:
Page of 1
16-1/2" Oregon High Lift Blade 91-620 16-1/2" High Lift Blade

Part# 91-620
Each Price (6 to 29): $11.25
Each Price (30 or More): $10.75

16-1/2" Oregon High Lift Blade used on several brands 48" mower decks. Such as Hustler, Scag, Wright Mfg. and more. Oregon® 91-620 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205
  • Replaces Encore OEM# 483035
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 601123, 795797, 795797X, 606252, 606252X
  • Replaces John Deere OEM# TCU34166, AM104489
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 48110, 481706, 482461, 482877
  • Replaces Toro OEM# 107-3196-03, 133-2137
  • Replaces Wright Mfg. OEM# 71440002
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (2) for 32" or (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.25
18" Oregon Medium Lift Blade 91-622 18" Medium Lift Blade

Part# 91-622
Each Price (6 to 29): $11.25
Each Price (30 or More): $10.75


18" Oregon Medium Lift Blade used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 1-633482, 103-2528, 1-306283, 103-6584
  • Replaces Ferris OEM# 5021227, 5021227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 482462, 481707
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Air Lift: 1"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.25
18" EMP T4 Mulching Blade 29-045 18" T4 Mulching Blade

Part# 29-045
Each Price (6 to 29): $11.50
Each Price (30 or more): $11.00

18" EMP T4 Mulching Blade used on various 36" & 52"models. Such as: Bad Boy, Bobcat, early Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440001, 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
  • Heavy Duty version use EMP# 29-945
  • Made in the USA ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.50
XHT 18" High Lift HD Blade B1BC1202 18" High Lift HD Blade

Part# B1BC1202
Each Price (6 or more): $12.50
Each Price (30 or more): $12.00

18" XHT High Lift HD Blade used on various 36" & 52" models. Such as: Bad Boy, Bobcat, Exmark, Ferris, Great Dane, Husqvarna, Snapper, Scag, John Deere, Toro, Wright Mfg and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.

  • Replaces Bad Boy OEM# 038-5202-00, 038-3010-00
  • Replaces Bobcat OEM# 112111-02, 32022A
  • Replaces Exmark OEM# 1-303283, 103-6584-S, 1-633482
  • Replaces Ferris OEM# 1521227, 5021227, 5021227S, 5101756
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800, 0450300
  • Replaces Husqvarna OEM# 539100341, 539101485
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208
  • Replaces Scag OEM# 48108, 481707, 482462, 482878,481711
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751, 7075751, 7075751BZ, 7075751BZYP
  • Replaces Toro OEM# 105-7781
  • Replaces Wright Mfg OEM# 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (2) for 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.50
Oregon 18" High Lift HD Blade 91-184 18" High Lift HD Blade

Part# 91-184
Each Price (6 to 29): $12.75
Each Price (30 or More): $12.25

18" Oregon High Lift HD Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 363055, 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Air Lift: 1"
  • Requires (2) for 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.75
16-1/2" EMP High Lift Heavy Duty Blade 26-004 16-1/2" High Lift HD Blade

Part# 26-004
Each Price (6 to 29):
$12.95
Each Price (30 or more):
$12.45


16-1/2" EMP High Lift Heavy Duty Blade used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, John Deere, Scag, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205, PL4855
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler OEM# 601014, 601123, 795757, 606252
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Snapper/Kees OEM# 1-7043, 7075771, 7075771BZ, 7075771BZYP
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.95
16-1/4" XHT Notched Medium Lift HD Blade B1FE1048 16-1/4" Notched Medium Lift HD Blade

Part# B1FE1048
Each Price (6 or more): $13.90

16-1/4" XHT Notched Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

  • Replaces Bad Boy OEM# 038-3000-00, 038-4820-00
  • Replaces Bobcat OEM# WMTA3206, WMTA32061
  • Replaces Ferris OEM# 5101986, 5101986BM, 5101986BMYP
  • Replaces Gravely OEM# 04919100
  • Replaces Husqvarna OEM# 539100340
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5101986BMYP
  • Replaces Toro OEM# 103-2517, 103-2527
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (2) for 32" or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $14.90
16-1/4" XHT Medium Lift Blade B1EM1805 16-1/4" Medium Lift Blade

Part# B1EM1805
Each Price (6 or More): $14.90

16-1/4" XHT Medium Lift Blade used on 48" Ariens/Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

  • Replaces Ariens/Gravely OEM# 00273000, 04920600
  • Replaces Bad Boy OEM# 038-4826-00
  • Replaces Exmark OEM# 1-323515, 1-403026, 103-6583, 103-6583-S
  • Replaces Ferris OEM# 5020843
  • Replaces Husqvarna OEM# 539100340
  • Replaces Simplicity/Snapper OEM# 5020843, 5020843SM
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.90
16-1/4" Oregon Wavy Mulching Blade 91-368 16-1/4" Wavy Mulching Blade

Part# 91-368
Each Price (6 or More): $15.95

16-1/4" Oregon Wavy Mulching Blade for several different brands of 48" mowers, from Ariens/Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. X-Tended Cutting Length™ optimizes the cutting efficiency and an enhanced mulching for bagging and discharge efficiency.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: .250"
  • Blade Thickness: .203" high carbon steel
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.95
16-1/4" Gator G3 Mulching Blade 96-310 16-1/4" Gator G3 Mulching Blade

Part# 96-310
Each Price (6 or More): $15.95

16-1/4" Gator G3 Mulching Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203" high carbon steel
  • Requires: (3) per 48" deck
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching designs in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.95
16-1/2" Oregon Gator G3 Mulching Blade 96-308 16-1/2" Gator G3 Mulching Blade

Part# 96-308
Each Price (6 or More): $15.95

16-1/2" Oregon Gator G3 Mulching Blade used on 48" models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Air Lift: 1"
  • Requires: (2) for 32" or (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.95
18" Predator Series HD Mulching Blade B1PD5008 18" Predator HD Mulching Blade

Part# B1PD5008
Each Price (6 or More): $16.90

18" Predator Series HD Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, early Exmark, Ferris, Gravely, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.90
18" Oregon Gator G3 Mulching Blade 96-344 18" Gator G3 Mulching Blade

Part# 96-344
Each Price (6 or More): $16.95

18" Oregon Gator G3 Mulching Blade used on various 36" and 52" models. Such as Bad Boy, Ferris, Great Dane, John Deere, Scag, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Air Lift: 3/4"
  • Requires: (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.95
XHT 21" Medium Lift HD Blade B1EM1803 21" XHT Medium Lift HD Blade

Part# B1EM1803
Each Price (6 or more): $16.95


21" XHT Medium Lift Heavy Duty Blade used on various 61" models. Such as Bad Boy, Gravely, Ferris, Scag, Wright Mfg and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

  • Replaces Bad Boy OEM# 038-6080-00
  • Replaces Bobcat OEM# 112111-03, 112243-03
  • Replaces Ferris OEM# 15208425, 5020842, 5101755S
  • Replaces Gravely/Great Dane OEM# 05290000
  • Replaces Husqvarna OEM# 539101733
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 482787, 481708, 481712, 482879
  • Replaces Snapper OEM# 7075770YP
  • Replaces Wright Stander OEM# 71440003
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (3) per 61"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $17.95
Oregon 25" Medium Lift HD Blade 91-609 25" Medium Lift HD Blade

Part# 91-609
Each Price (6 or more): $20.50ea

25" Oregon Medium Lift HD Blade used on various 72" models. Such as Bobcat, Dixon, Husqvarna and more. Can also be used on Ventrac MS720 Frount Mount Finish Cut models. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results, and enhanced hardening to keep the blade sharper and more durable.

  • Replaces Bobcat/Ransome OEM# 112111-04, 42139B, WM142139B
  • Replaces Dixon OEM# 539105476
  • Replaces Ferris OEM# 22476, 5022476
  • Replaces Husqvarna OEM# 525341101, 539105476, 539105571, 574481401
  • Replaces Lastec OEM# P107, P701, P848, P849
  • Replaces Snapper OEM# 5102227
  • Replaces Ventrac OEM# 79.0105
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (3) per 72"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $21.50
18" Oregon Low Lift HD Blade 91-235 18" Oregon Low Lift HD Blade

Part# 91-235
Each Price (6 or More): $20.95

18" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.

  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Ferris OEM# 1521227, 5021227
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# AM104490, PT11136
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $21.95