15-1/8" Medium Lift Blade

Part# 92-142
Each Price (6 or More): $10.95

15-1/8" Oregon Medium Lift Blade used on 42" Dixie Chopper Zee 1 also used on 44" Bush Hog models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

• Replaces Dixie Chopper OEM# 300632, 301067
• Replaces Bush Hog OEM# 50056493
• Length: 15-1/8"
• Width: 2.50"
• Thickness: .203"
• Center Hole: 1/2"
• Requires (3) for 42" cut & (3) for 44" cut

(May NOT fit all models- Check product description for exact OEM Part # match)

15-5/8" Medium Lift Blade

Part# B1HS1001
Each Price (6 or more): $8.95

15-5/8" XHT Medium Lift Blade used on 44" Hustler Fas Trak, Super Mini Z, Mini Z models. Can also be used on 44" Landpride models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

• Replaces Hustler OEM# 784256, 785728, 787739, 794693, 796300
• Replaces Landpride OEM# 839-267C
• Length: 15-5/8"
• Width: 2.50"
• Thickness: .197"
• Center Hole: 5/8"
• Requires: (3) for 44" cut

(May NOT fit all models- Check product description for exact OEM Part # match)

16-1/2" High Lift Blade

Part# 325-278

Each Price (6 or More): $14.95

16-1/2" High Lift Blade used on 48" Cub Cadet ZForce (53AA5A7M710) and (53AA5A7M712) ZTR models.

• Replaces Cub Cadet OEM# 01004772
• Length: 16-1/2"
• Width: 3.00"
• Thick: .203"
• Center Hole: 3/4
  

(May NOT fit all models- Check product description for exact OEM Part # match)

16-9/16" High Lift Blade

Part# 91-447

Each Price (6 or More): $13.50

16-9/16" Oregon High Lift Blade for the following 48" John Deere Lawn Tractors: 180, 240, 245, 260, 265, 285, 320, 335, and 345. Also used on Sabre 1848GV, 1848HV, 19484GV, 1948HV, 2048HV, and 2148HV Tractor models along with Scotts S2048 and S2348 models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces John Deere OEM# AM115442, M111522, M114581, M115328, M115495, M135589, M76466
• Length: 16-9/16"
• Width: 2.50"
• Thickness: .203"
• Offset: 7/16"
• Center Hole: 13/16"
• Requires (3) for 48"

(May NOT fit all models- Check product description for exact OEM Part # match)

17" High Lift Blade

Part# B1CC1406

Each Price (6 or More): $15.50

17" XHT High Lift Blade used on 48" Cub Cadet models: Enforcer PRO HW 300 348 (2018-2022), PRO X 600 KW 648 (2020-2022), PRO Z 100 EFI 148-L (2016-2019), PRO Z 100 EFI 148-S (2016-2022), PRO Z 500 KW 548-L (2018), RECON 48, Tank L48KH LZ48, SZ48, Z-Force L48 (2013-2018), Z-Force LX48 KW (2016-2019), Z-Force LZ48 (2014-2015), Z-Force S 48 (2013), Z-Force S48 (2018-2019), Z-Force SX48 KW (2016-2022), Z-Force SZ48 KH FAB (2016-2021). Also used on 48" Lesco Z-Two mower models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

• Replaces Cub Cadet OEM# 01005336, 02005017, 742-04417, 942-04417
  
• Replaces Lesco OEM# 705336
  
• Length: 17"
• Width: 3.00"
• Thick: .203"
• Center Hole: 3/4
  

(May NOT fit all models- Check product description for exact OEM Part # match)

17" High Lift Blade

Part# 350-528

Each Price (6 or More): $12.75

17" High Lift Blade used on 48" Cub Cadet models: Enforcer 48, PRO HW 300 348 (2018-2022), PRO X 600 KW 648 (2020-2022), PRO Z 100 EFI 148-L (2016-2019), PRO Z 100 EFI 148-S (2016-2022), PRO Z 500 KW 548-L (2018), RECON 48, Tank L48KH LZ48, SZ48, Z-Force L48 (2013-2018), Z-Force LX48 KW (2016-2019), Z-Force LZ48 (2014-2015), Z-Force S 48 (2013), Z-Force S48 (2018-2019), Z-Force SX48 KW (2016-2022), Z-Force SZ48 KH FAB (2016-2021).

• Replaces Cub Cadet OEM# 01005336, 02005017, 742-04417, 942-04417
• Replaces Lesco OEM# 705336
  
• Length: 17"
• Width: 3.00"
• Thick: .203"
• Center Hole: 3/4
  

(May NOT fit all models- Check product description for exact OEM Part # match)

18" High Lift HD Blade

Part# B1GH1906

Each Price (6 or More): $15.95

18" XHT Contour High Lift Heavy Duty Blade for 52" Grasshopper Front Mount and M152 Mid Mount deck models. Also used on 52" Woods D5221T & D6121T Mow'n Machine models. (Xtreme Hardness & Toughness) High Lift blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

• Replaces Grasshopper OEM# 320238
  
• Replaces Woods OEM# 70117KT, 72505KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Requires (3) per 52"

(May NOT fit all models- Check product description for exact OEM Part # match)

18" Medium Lift Blade

Part# B1HV2203
Each Price (6 or more): $12.25

18" XHT Medium Lift Blade used on various 52" models; Husqvarna EZ5221, EZ5224, MZ25, MZ52, MZT52, MZ5225, MZ5226 and Yazoo Kees ZELKH5225, ZELKH52240, and ZEKW52210. Also used on Redmax CZT52, Dixon Ultra 52 and Jonsered Z52XFmodels.

• Replaces Husqvarna/YazooKees/Redmax/Dixon/Jonsered OEM# 539112079
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 5 Point Star
• Requires (3) for 52"

(May NOT fit all models- Check product description for exact OEM Part # match)

18-1/2" Medium Lift Blade

Part# B1HS1008
Each Price (6 or More): $13.90

18-1/2" XHT Medium Lift Blade used on 54" Hustler and Big Dog mower models. Also used on 54" Spartan mower models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard OEM lawnmower blades. Benefits of using the XHT blade are sharper and longer lasting cutting edges. Along with more resistance to bending.
XHT blades offer greater impact toughness than standard style blades.

• Replaces Hustler OEM# 601124, 606990, 797696
• Replaces Spartan OEM# 438-0001-00
• Length: 18-1/2"
• Blade Width: 2.50"
• Blade Thickness: .197"
• Center hole: 5/8"
• Require (3) for 54" deck
• Or try our proprietary blade EMP# 26-985

(May NOT fit all models- Check product description for exact OEM Part # match)

18-3/4" High Lift Blade

Part# B1TR3202
Each Price (6 or more): $11.25

18-3/4" XHT High Lift Blade used on Toro 54" Titan ZX5450, ZX5400, MX5400 and 54" TimeCutter HD ZX5400, TimeCutter My Ride HD models. Other brands are .160" or .164" thick, but the XHT version is .187" thick. Making it one of thickest blades on the market. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.

• Replaces Toro/Exmark OEM# 115-9650-03, 115-2454-03
  
• Blade Width: 2.25"
• Blade Thickness: .187"
• Center hole: 5/8"

(May NOT fit all models- Check product description for exact OEM Part # match)

18-3/8" High Lift Blade

Part# 91-129

Each Price (6 or More): $20.25

18-3/8" Oregon High Lift Blade for 36" & 52" Country Clipper Boss, Charger, JaZee, SR1025, SR375, and Trek Hydro mower models. This blade is made to the exact OEM specification for optimum performance. Our blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Country Clipper OEM# H-2246, H-2251, H-2387, H-2499
• Length: 18-3/8"
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1-1/4"
• Requires (2) for 36" cut or (3) for 52" cut

(May NOT fit all models- Check product description for exact OEM Part # match)

19" High Lift Blade

Part# B1CC1413
Each Price (6 or More): $17.95

19" XHT High Lift Blade used on 54" Cub Cadet M54 Tank and Z-Force Pro 54 mower models. Also used on 54" Lesco \Viper models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

• Replaces Cub Cadet OEM# 01005380, 02005018, 942-04416
  
• Width: 3.00"
• Thick: .203"
• Center Hole: 3/4"
  

(May NOT fit all models- Check product description for exact OEM Part # match)

19" Medium Lift HD Blade

Part# B1HV2204
Each Price (6 or More): $17.50

19" XHT Medium Lift Heavy Duty Blade used on Husqvarna PZ54, Dixon DX254, Yazoo Kees ZPKW6029, and Redmax CZT54x models. Can be used on newer 54" Dixie Chopper Blackhawk & Blackhawk HP models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper & longer lasting cutting edge.

• Replaces Husqvarna/Dixon/Redmax/Yazoo OEM# 575265901, 581055502
• Replaces Dixie Chopper OEM# 301245
  
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Require (3) per 54"

(May NOT fit all models- Check product description for exact OEM Part # match)

20-1/2" High Lift Blade

Part# B1CC1421
Each Price (6 or More): $19.95

20-1/2" XHT High Lift Blade used on 60" Cub Cadet Z-Force models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending & tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

• Replaces Cub Cadet OEM# 01004719, 01004719P, 01004719-0637
  
• Width: 3.00"
• Thick: .203"
• Center Hole: 3/4
• Requires (3) for 60"

(May NOT fit all models- Check product description for exact OEM Part # match)

20-1/2" High Lift Blade

Part# 91-188
Each Price (6 or more): $16.35

20-1/2" Oregon High Lift Blade for 60" Exmark Explorer, Explorer II, Turf Ranger & Turf Tracer models. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

• Replaces Exmark OEM# 1-603283, 1-603874, 103-3231, 103-3233
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 1/2"
• Air Lift: 1"
• Requires: (3) per 60"

(May NOT fit all models- Check product description for exact OEM Part # match)

20-15/16" High Lift Blade

Part# 91-457
Each Price (6 or more): $18.25

20-15/16" Oregon High Lift Blade used on 60" Land Pride models: AFM4014 All Flex Grooming Mower, AT2560 Air Tunnel Grooming Mower, AT2660 Air Tunnel Grooming Mower, FD2560 Flat Deck Grooming Mower, FDR1560 Rear Discharge Grooming Mower, FDR1660 Rear Discharge Grooming Mower, FDR2560 Rear Discharge Grooming Mower. The Oregon 91-457 mower blade is created to provide consistency and longevity, while delivering a cleaner cut and quality results.

• Replaces Land Pride OEM# 890-171C, 890-951C
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 1"
• Offset: 3/4"
• Air Lift: 1-3/16"
  
• Requires (3) per 60"

(May NOT fit all models- Check product description for exact OEM Part # match)

20-15/16" High Lift Blade

Part# 91-128
Each Price (6 or More): $22.15

20-15/16" Oregon High Lift Blade used on 60" Country Clipper models: SR-125, SR1025, SR1220, SR1220L, and SR375. Also used on 60" Snapper models: Z120T, Z1251BV, Z1401K, Z1404K, Z140T, Z160T, Z1800T, Z1801K, Z1804K, Z1805KV, Z180T, Z2001K, Z2004K, Z2010K, Z2010T, Z2205KV, Z4200M, Z4201M, Z4202M, Z4800M, Z4801M, Z4802M, Z4804M, Z6000M, Z6002M, Z6004M, ZTR, ZU4803M, ZU4804M, ZU4813M, ZU6003M, and ZU6004M. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Country Clipper OEM# H-1667, H-1708, H-2122, H-2203, H-2500
• Replaces Snapper OEM# 7079222, 7079371, 7079371BM, 7079371BMYP, 7079371YP
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1-1/4"
• Requires: (3) per 60"

(May NOT fit all models- Check product description for exact OEM Part # match)

20-15/16" High Lift HD Blade

Part# 90-208
Each Price (6 or More): $17.50

20-15/16" Oregon High Lift HD Blade used on 60" Hustler ATZ, Super Z, and Super Z LC models: 926253, 926295, 926360, 926378, 926451, 926469, 926667, 926675, 926741, 926915, 926923, 926931, 926949, 926980, 927012, 927038, 927053, 927111, 927178, 927186, 927558. Oregon lawn mower blades are created to provide consistency and longevity, while delivering a cleaner cut and quality results.

• Replaces Hustler OEM# 782516
• Width: 3.00"
• Thickness: .250"
• Center hole: 5/8"
• Offset: 5/8"
• Air Lift: 1"
• Requires (3) per 60"
• DOES NOT fit Hustler XR7 Deck

(May NOT fit all models- Check product description for exact OEM Part # match)

21" High Lift Blade

Part# B1CC1418
Each Price (6 or More): $19.95

21" XHT High Lift Blade used on 60" decks on Cub Cadet models: PRO X 600 (2020-2022), PRO Z 100 (2016-2022), PRO Z 500 (2016-2022), PRO Z 700 (2016-2022), PRO Z 900 (2016, 2018-2022), PRO Z 900 SurePath (2021-2022), RECON 60 (53AH8ST5050), Tank S6031 (53AI8DU6050), Tank L60 (53YI2RTD050), Tank L60KH (53AN2RTD009)(53AN2RTD050)(53RN2RTD050), Tank L60KW (53AI2RTD050)(53RI2RTD050), Tank L60KW (53YI2RTD050), Tank LZ60KW (53YI2PTD050), Tank LZ-60KH (53AH2PTD050), Tank LZ-60KW (53AI2PTD050), Tank LZ60KW (53BI2PTD050), Tank LZ60KW (53YI2PTD050), Tank S60KH(53RN2RUD050), Tank S60KH (53RN2RUD050), Tank SZ60 (53AI2PUD050), Tank SZ60 (53BI2PUD050),Tank SZ60KH (53RE2PUD050), Tank SZ60KH (53RE2PUD050), Tank SZ60KW (53YI2PUD050), Tank SZ60KW (53YI2PUD050), Z-Force L60 (17ASDALD010), Z-Force L60 (17ASDALD009), Z-Force L60 FAB (17CSDALD010), Z-Force L60 KH FAB (17ASDALD056), Z-Force L60 KH FAB (17BSDALD009), Z-Force L60 KH FAB (17BSDALD009). Also used on 60" Lesco Z-Two models. XHT blades (Xtreme Hardness & Toughness) are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending & tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

• Replaces Cub Cadet OEM# 742-04415, 742-04415-ES, 942-04415
• Replaces Lesco OEM# 705338
  
• Width: 3.00"
• Thick: .203"
• Center Hole: 3/4"
• .(3) for 60"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" High Lift HD Blade

Part# 93-011
Each Price (6 or More): $17.95

21" Oregon High Lift Heavy Duty Blade used on various 61" Bobcat, Ransome, Wright Stander, Spartan and John Deere 661R Quik-Trak models. Oregon blades are individually straightened with an extended cutting edge and are hardened to provide a consistent, cleaner cut and increased blade longevity.

• Replaces Bobcat OEM# 112111-03, 112243-03
• Replaces John Deere OEM# TCU34281
  
• Replaces Spartan OEM# 438-0002-00
• Replaces Wright Stander OEM# 71440007, 71440010
  
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 5/8"
• Offset: 1/2"
• Air Lift: 1-1/8"
• Requires: (3) per 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" High Lift HD Blade

Part# 91-534

Each Price (6 or More): $14.25

21" Oregon High Lift Heavy Duty Mulching Blade used on 61" Grasshopper Front Mount and M161 Mid Mount models. Also used on Bush Hog ATH600, ATH720, FTH600, FTH720 models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

• Replaces Grasshopper OEM# 320244
• Replaces Bush Hog OEM# 88668
• Replaces Woods OEM# 70134, 70134KT
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1/2"
• Offset: 5/16"
• Air Lift: 1-3/16
• Requires (3) for 61"

(May NOT fit all models- Check product description for exact OEM Part # match)

21" High Lift HD Blade

Part# 91-035
Each Price (6 or More): $19.75

21" Oregon High Lift Heavy Duty Blade used on 60" Bush Hog models: ATH, ATH600, ATH720, FTH, FTH600, and FTH720. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Bush Hog OEM# 88668
  
• Center hole: 1/2"
• Blade Width: 2.50"
• Blade Thickness: .250"
  
• Offset: 1/4""
• Air Lift: 1-1/4"
  
• Requires (3) for 60" cut

(May NOT fit all models- Check product description for exact OEM Part # match)

21-7/8" Medium Lift HD Blade

Part# 92-120
Each Price (6 or More): $17.75

21-7/8" Oregon Medium Lift HD Blade used on 62" John Deere TerrainCut Front Mower Models 1550, 1570, 1575, 1580, 1585, and 1600. Also used on 62" & 42" John Deere 1600 and 1620 Turbo Series II Wide Area Mowers. This Oregon OEM replacement lawn mower blade is made to the exact OEM specification for optimum performance.

• Replaces John Deere OEM# M144297, M144935, TCU51118
• Blade Width: 2.50"
• Blade Thickness: .312"
• Center hole: 7/8"
• Offset: 3/8"
• Air Lift: 7/8"
  
• Requires (3) per 62" or (2) per 42"

(May NOT fit all models- Check product description for exact OEM Part # match)

22" Medium Lift Blade

Part# 91-051

Each Price (6 or More): $15.85

22" Oregon Medium Lift Blade used on 44" Swisher T-44 Finish Cut Trailmower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Swisher OEM# 9005, 9036, B32S
• Blade Width: 2.25"
• Blade Thickness: .187"
• Center hole: 3/8"
• Outer holes: 3/8"
• Offset: 1/2"
• Air Lift: 13/16"
• Require: (2) per 44"

(May NOT fit all models- Check product description for exact OEM Part # match)

22-1/2" Medium Lift Blade

Part# B1HS1011

Each Price (6 or More): $18.65

22-1/2" XHT Medium Lift Blade used on 66" Hustler Diesel Z, Super Z, and Super Z Hyper Drive models. Also can be on 66" Gravely PM266H, PM266M, Pro-Master 266H, Pro-Turn 266, Pro-Turn 466 models and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.

• Replaces Hustler/Excel OEM# 798496
• Replaces Gravely OEM# 00360200
• Width: 3.00"
• Thickness: .203"
• Center hole: 5/8"
• Requires (3) per 66"

(May NOT fit all models- Check product description for exact OEM Part # match)

25" High Lift HD Blade

Part# 91-456
Each Price (6 or more): $24.95

25" Oregon High Lift Heavy Duty Blade used on 72" Land Pride models: AFM4016 & AFM40200, AFM4216, AT2560, AT2584, AT2572, AT2672, AT2660, AT2684, FD2548, FD2560, FDR1572, FDR1648, FDR1660, FDR2548, FDR2584, FDR2560 and FDR2572. The Oregon 91-456 mower blade is created to provide consistency and longevity, while delivering a cleaner cut and quality results.

• Replaces Land Pride OEM# 890-172C, 890-200
• Length: 24-7/8"
• Blade Width: 2.50"
• Blade Thickness: .250"
• Center hole: 1"
• Outer hole: 1/2"
• Offset: 3/4"
• Air Lift: 1-1/8"
  
• Requires (3) per 72"

(May NOT fit all models- Check product description for exact OEM Part # match)

29-9/16" OE Style Blade

Part# 91-399
Each Price (2 or more): $25.95

29-9/16" Oregon OE Style Blade used on 30" John Deere 108, 111, 111H, 112L, 130, 160 and 165 Lawn Tractor models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces John Deere OEM# M89454, M89455
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 11/16"
• Offset: 7/16"
• Air Lift: 1-3/8"
• Requires: (1) per 30"

(May NOT fit all models- Check product description for exact OEM Part # match)