You are here:Home > Blades > Blades by OEM Brand > Kees, F.D.
We found 21 results matching your criteria.
    See Snapper Blades - 16-1/4", 18", and 21"
Sort By:
Page of 1
16-1/4"  Predator HD Mulching Blade B1PD5005 16-1/4" Predator HD Mulching Blade

Part# B1PD5005
16-1/4" Predator Series HD Mulching Blade for several brands of 32" and 48" Mower decks. Used on Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4820-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 48" deck or (2) per 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
96-310 Oregon 16-1/4" Gator G3 Mulching Blade 16-1/4" Gator G3 Mulching Blade

Part# 96-310
16-1/4" Oregon Gator G3 Mulching Blade used on different brands of 48" models, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Requires: (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.50
16-1/4" XHT Notched Medium Lift HD Blade B1FE1048 16-1/4" Notched Medium Lift HD Blade

Part# B1FE1048
16-1/4" XHT Notched Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

  • Replaces Bad Boy OEM# 038-3000-00, 038-4820-00
  • Replaces Bobcat OEM# WMTA3206, WMTA32061
  • Replaces Ferris OEM# 5101986, 5101986BM, 5101986BMYP
  • Replaces Gravely OEM# 04919100
  • Replaces Husqvarna OEM# 539100340
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5101986BMYP
  • Replaces Toro OEM# 103-2517, 103-2527
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (2) for 32" or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.90
16-1/4" XHT Medium Lift Blade B1HV2202 16-1/4" OE Style Medium Lift Blade

Part# B1HV2202
16-1/4" XHT Medium Lift Blade used on 48" Husqvarna models: EZ4220, EZ4624, EZ4819, EZ4822, EZ4824, EZ5224, EZ5225, EZ5226, EZC4824, GTH26, GTH27, YTH24, YTH2648, MZ48, Z448. Also used on Yazoo Kees ZEKH48240, ZEKW48190, ZEKW48191X, GRAM211302 and Dixon RAM48ZT and Speed ZTR models.

  • Replaces Dixon OEM# 539113425, 575296401
  • Replaces Husqvarna OEM# 539113425
  • Replaces Kees: 539113425
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .204"
  • Center hole: 5 Point Star
  • Requires (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $13.90
16-1/4" EMP T4 Mulcher HD Blade 29-905 16-1/4" T4 HD Mulching Blade

Part# 29-905
16-1/4" EMP T4 Heavy Duty Mulching Blade for several brands of 32" & 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4827-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-2527, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 21537, 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Requires (2) for 32" deck or (3) per 48" deck
  • For our Standard version use EMP# 29-005
  • Made in the USA in ISO 9001 certified plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Sale Price: $12.00
You save $1.50!
16-1/4" Oregon Wavy Mulching Blade 91-368 16-1/4" Wavy Mulching Blade

Part# 91-368
16-1/4" Oregon Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. X-Tended Cutting Length™ optimizes the cutting efficiency and an enhanced mulching for bagging and discharge efficiency.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Blade Width: .250"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires: (2) per 32" or (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Sale Price: $13.95
You save $3.00!
18" Predator Mulching Blade B1PD5008 18" Predator HD Mulching Blade

Part# B1PD5008
18" Predator Series HD Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, early Exmark, Ferris, Gravely, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.85
18" Oregon Gator G3 Mulching Blade 96-344 18" Gator G3 Mulching Blade

Part# 96-344
18" Oregon Gator G3 Mulching Blade used on various 36" and 52" models. Such as Bad Boy, Ferris, Great Dane, John Deere, Scag, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Air Lift: 3/4"
  • Requires: (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.95
Oregon 18" High Lift HD Blade 91-184 18" High Lift HD Blade

Part# 91-184
18" Oregon High Lift HD Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 363055, 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Air Lift: 1"
  • Requires (2) for 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.75
XHT 18" High Lift HD Blade B1BC1202 18" High Lift HD Blade

Part# B1BC1202
18" XHT High Lift HD Blade used on various 36" & 52" models. Such as: Bad Boy, Bobcat, Exmark, Ferris, Great Dane, Husqvarna, Snapper, Scag, John Deere, Toro, Wright Mfg and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.

  • Replaces Bad Boy OEM# 038-5202-00, 038-3010-00
  • Replaces Bobcat OEM# 112111-02, 32022A
  • Replaces Exmark OEM# 1-303283, 103-6584-S, 1-633482
  • Replaces Ferris OEM# 1521227, 5021227, 5021227S, 5101756
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800, 0450300
  • Replaces Husqvarna OEM# 539100341, 539101485
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208
  • Replaces Scag OEM# 48108, 481707, 482462, 482878,481711
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751, 7075751, 7075751BZ, 7075751BZYP
  • Replaces Toro OEM# 105-7781
  • Replaces Wright Mfg OEM# 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (2) for 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.50
18" Oregon Medium Lift Blade 91-622 18" Medium Lift Blade

Part# 91-622
18" Oregon Medium Lift Blade used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 1-633482, 103-2528, 1-306283, 103-6584
  • Replaces Ferris OEM# 5021227, 5021227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 482462, 481707
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Air Lift: 1"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.99
XHT 18" Medium Lift Blade B1HV2203 18" Medium Lift Blade

Part# B1HV2203
18" XHT Medium Lift Blade used on various 52" models; Husqvarna EZ5221, EZ5224, MZ25, MZ52, MZT52, MZ5225, MZ5226 and Yazoo Kees ZELKH5225, ZELKH52240, and ZEKW52210. Also used on Redmax CZT52, Dixon Ultra 52 and Jonsered Z52XFmodels.

  • Replaces Husqvarna/YazooKees/Redmax/Dixon/Jonsered OEM# 539112079
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5 Point Star
  • Requires (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $13.95
18" Oregon Low Lift HD Blade 91-235 18" Oregon Low Lift HD Blade

Part# 91-235
18" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.

  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Ferris OEM# 1521227, 5021227
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# AM104490, PT11136
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $21.95
18" EMP T4 Heavy Duty Mulching Blade  29-945 18" T4 HD Mulching Blade

Part# 29-945
18" EMP T4 Heavy Duty Mulching Blade used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
  • Made in the USA in ISO 9001 certified plant
  • For our standard version use EMP# 29-045
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.25
18" EMP T4 Mulching Blade 29-045 18" T4 Mulching Blade

Part# 29-045
18" EMP T4 Mulching Blade used on various 36" & 52"models. Such as: Bad Boy, Bobcat, early Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440001, 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
  • Heavy Duty version use EMP# 29-945
  • Made in the USA ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.50
XHT 19" Medium Lift HD Blade B1HV2204 19" Medium Lift HD Blade

Part# B1HV2204
19" XHT Medium Lift Heavy Duty Blade used on Husqvarna PZ54, Dixon DX254, Yazoo Kees ZPKW6029, and Redmax CZT54x models. Can be used on newer 54" Dixie Chopper Blackhawk & Blackhawk HP models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper & longer lasting cutting edge.

  • Replaces Husqvarna/Dixon/Redmax/Yazoo OEM# 575265901, 581055502
  • Replaces Dixie Chopper OEM# 301245
  • Replaces Jacobsen OEM# 301245N
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (3) per 54"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $18.50
21" Oregon Gator G3 Mulching Blade 96-347 21" Gator G3 Mulching Blade

Part# 96-347
21" Oregon Gator G3 Mulching Blade used on various 61" models. Such as Bad Boy, Gravely, Ferris, Scag, Wright Mfg and more. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-6082-00, 038-6091-00
  • Replaces Bobcat OEM# 42180B, WM142180B
  • Replaces Bunton OEM# PC005
  • Replaces Encore OEM# 823006
  • Replaces Ferris OEM# 15208425, 5020842
  • Replaces Giant Vac OEM# 3021538
  • Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
  • Replaces Hustler OEM# 795252
  • Replaces Husqvarna OEM# 539105711
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
  • Replaces Snapper OEM# 5101755BMYP
  • Replaces Wright Stander OEM# 71440003, 71490003
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Requires: (3) per 61"
  • EMP proprietary HD blade #29-974
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.65
21" EMP High Lift HD Blade 26-072 21" High Lift HD Blade

Part# 26-072
21" EMP High Lift Heavy Duty Blade used on various mowers with 61" mower decks. Such as Ariens, Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are the best choice for thinner blade grasses such as Bluegrass, Rye, and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Bad Boy, Ferris, Scag, Wright Mfg, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-6080-00, 038-6085-00
  • Replaces Bobcat OEM# 42180B, WM142180B
  • Replaces Bunton OEM# PC005
  • Replaces Encore OEM# 823006
  • Replaces Ferris OEM# 15208425, 5020842
  • Replaces Giant Vac OEM# 3021538
  • Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
  • Replaces Husqvarna OEM# 539105711
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
  • Replaces Snapper OEM# 5101755BMYP
  • Replaces Wright Stander OEM# 71440003
  • Length: 21"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires: (3) for 61" deck
  • Requires: (2) for 42" on Wright Standers
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.95
21" EMP Medium Lift HD Blade 26-021 21" Medium Lift HD Blade

Part# 26-021
21" EMP Medium Lift Heavy Duty Blade used on various 61" models. Such as Bad Boy, Bobcat, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue.

  • Replaces Bad Boy OEM# 038-6080-00
  • Replaces Bobcat OEM# 112111-03, 112243-03
  • Replaces Ferris OEM# 15208425, 5020842, 5101755S
  • Replaces Gravely/Great Dane OEM# 05290000, GDU10232
  • Replaces Husqvarna OEM# 539105711, 539101733
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881
  • Replaces Snapper OEM# 5101755BMYP
  • Replaces Wright Stander OEM# 71440003
  • Replaces Ventrac OEM# 79.0109
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Require (3) for 61"
  • Made in the USA in ISO 9001 certified plant
  • Try our proprietary standard duty blade #26-211
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.50
21" EMP T4 HD Mulching Blade 29-974 21" T4 HD Mulching Blade

Part# 29-974
21" EMP T4 Heavy Duty Mulching Blade used on 61" Decks for Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

  • Replaces Bad Boy OEM# 038-6082-00, 038-6091-00
  • Replaces Bobcat OEM# 42180B, WM142180B
  • Replaces Bunton OEM# PC005
  • Replaces Encore OEM# 823006
  • Replaces Ferris OEM# 15208425, 5020842
  • Replaces Giant Vac OEM# 3021538
  • Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
  • Replaces Hustler OEM# 795252
  • Replaces Husqvarna OEM# 539105711
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
  • Replaces Snapper OEM# 5101755BMYP
  • Replaces Wright Stander OEM# 71440003, 71490003
  • Length: 21"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Require (3) for 61" deck
  • For our Wavy Mulch blade version use EMP# 28-621
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
EMP 21" Wavy Mulching Blade 28-621 21" Wavy Mulching Blade

Part# 28-621
21" EMP Wavy Mulching Blade used on various 61" models. Such as Ariens, Gravely, Bobcat, Bad Boy, Ferris, Husqvarna, Scag, Snapper, Wright Stander and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-6080-00
  • Replaces Bobcat OEM# 42180B, WM142180B
  • Replaces Bunton OEM# PC005
  • Replaces Encore OEM# 823006
  • Replaces Ferris OEM# 15208425, 5020842
  • Replaces Giant Vac OEM# 3021538
  • Replaces Gravely/Great Dane OEM# 05290000, D18036, GDU10232
  • Replaces Hustler OEM# 795252
  • Replaces Husqvarna OEM# 539105711
  • Replaces John Deere OEM# UC10764,TCU35394
  • Replaces Lesco OEM# 050170
  • Replaces Scag OEM# 481159, 481708, 482001, 482787, 482881, 481712
  • Replaces Snapper OEM# 5101755BMYP
  • Replaces Wright Stander OEM# 71440003
  • Blade Width: 2.50"
  • Blade Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Require (3) for 61" deck
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)OEM & After Market

Each Price $12.95