You are here:Home > Blades > Blades by OEM Brand > Jacobsen
We found 25 results matching your criteria.
16-1/4" Blades - (3) for 48" cut 18" Blades - (2) for 36" cut, (3) for 52" cut 20-1/2" Blade - (3) for 60" cut
22-5/16" Blades - (5) for 90" cut, (7) for 124" cut 23" Fits HR511 Model LH cut 23" Fits HR511 Model RH cut
24-1/2" Blades - (3) for 72" cut
    For older model 48" Crew Chief and Crew King decks see 16-1/4" & 18" blades under Bobcat
Sort By:
Page of 1
Oregon's 16-1/4" G3 Gator Mulching Blade 96-310 16-1/4" EMP T4 Mulching Blade 29-005 Oregon's 16-1/4" Wavy Mulching Blade 91-368
16-1/4" T4 Mulching Blade
Each Price $13.45
Part# 96-310
Each Price (6 or More): $13.95

Oregon's 16-1/4" G3 Gator Mulching Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203" high carbon steel
  • Requires (3) per 48" deck
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 29-005
Each Price (6 or More): $12.95
Each Price (30 or More):
$12.45

EMP's 16-1/4" T4 Mulching Blade
for several different brands of 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4827-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .204" Hi-alloy Carbon Bar Steel
  • Requires (2) for 32" deck or (3) per 48" deck
  • For our Heavy Duty version use EMP# 29-905
  • Made in the USA in ISO 9001 certified plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

****Low Stock Alert, will be out soon*****
Part# 91-368
Each Price (6 or More): $13.50

Oregon's 16-1/4" Wavy Mulching Blade for several different brands of 48" mowers, from Ariens/Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution, an enhanced mulching for bagging and discharge efficiency.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: .250"
  • Blade Thickness: .203" high carbon steel
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

16-1/4" XHT Medium Lift Blade B1EM1805 16-1/4" XHT Medium Lift HD Blade B1FE1048 18" Predator Series HD Mulching Blade B1PD5008
Part# B1EM1805
Each Price (6 or more) $13.50

16-1/4" XHT Medium Lift Blade
for several brands of 48" mower decks such as Ariens/Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
  • Replaces Ariens/Gravely OEM# 00273000, 04920600
  • Replaces Bad Boy OEM# 038-4826-00
  • Replaces Exmark OEM# 1-323515, 1-403026, 103-6583, 103-6583-S
  • Replaces Ferris OEM# 5020843
  • Replaces Husqvarna OEM# 539100340
  • Replaces Simplicity/Snapper OEM# 5020843, 5020843SM
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Require (3) for 48" deck or (2) for 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1FE1048
Each Price (6 or more): $13.50

16-1/4" XHT Replacement Medium Lift HD Blade used on Ferris mowers with 48" iCD mower decks. But can also be used on several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness. This blade does have the new style lift extension, where the length of the lift goes from the standard size to 4" long.
  • Replaces Bad Boy OEM# 038-3000-00, 038-4820-00
  • Replaces Bobcat OEM# WMTA3206, WMTA32061
  • Replaces Ferris OEM# 5101986, 5101986BM, 5101986BMYP
  • Replaces Gravely OEM# 04919100
  • Replaces Husqvarna OEM# 539100340
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5101986BMYP
  • Replaces Toro OEM# 103-2517, 103-2527
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (2) for 32" or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1PD5008
Each Price (6 or More): $14.53

18" Predator Series HD Mulching Blade is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
18" G3 Gator Mulching Blade 96-344 18" EMP High Lift HD Blade 26-003 18" EMP Medium Lift HD Blade 26-018
18" High Lift HD Blade
Each Price $13.21
18" Medium Lift HD Blade
Each Price $13.21
Part# 96-344
Each Price (6 or More): $14.85

Oregon's 18" Gator G3 Mulching Blade is used on several brands of 36" and 52" mower models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 26-003
Each Price (6 to 29): $12.21
Each Price (30 or more): $11.71

EMP's 18" High Lift Heavy Duty Blade is used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands
  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 26-018
Each Price (6 to 29): $12.21
Each Price (30 or More):
$11.71


EMP's 18" Medium Lift Heavy Duty Blade thats used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made 100% Hi-carbon alloy steelp specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness and impact resistance. And are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer staightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. 4 out 5 customers prefer our brand of blades over all the aftermarket brands
  • Replaces Bad Boy OEM# 038-5202-00, 038-3010-00, 038-3000-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S
  • Replaces Ferris OEM# 1521227, 1521227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208
  • Replaces Scag OEM# 48108, 481711
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

18" Oregon Low Lift HD Blade 91-235 EMP's 18" T4 Heavy Duty Mulching Blade  29-945 EMP's 18" T4 Mulching Blade 29-045
18" T4 HD Mulching Blade
Each Price $13.95
18" T4 Mulching Blade
Each Price $12.95
Part# 91-235
Each Price (6 or More): $16.95

18" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.
  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Ferris OEM# 1521227, 5021227
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# AM104490, PT11136
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 29-945
Each Price (6 to 29): $12.95
Each Price (30 or More): $12.45

EMP's 18" T4 Heavy Duty Mulching Blade
is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For our standard version use EMP# 29-045
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 29-045
Each Price (6 to 29): $11.95
Each Price (30 or more): $11.45

EMP's 18" T4 Mulching Blade
is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For our Heavy Duty version use EMP# 29-945
(May NOT fit all models- Check product description for exact OEM Part # match)
EMP's 18" Wavy Mulching Blade 28-618 Oregon's 20-1/2" G6 Gator Mulching Blade 396-740 Oregon's 20-1/2" Medium Lift HD Blade 94-055
18" Wavy Mulching Blade
Each Price $12.95
Part# 28-618
Each Price (6 or More): $11.95
Each Price (30+): $11.45

EMP's 18" Wavy Mulching Blade
is used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. This standard wavy mulching blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Bad Boy OEM# 038-5215-00
  • Replaces Bobcat/Ransome OEM# WM132022
  • Replaces Exmark/Toro OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Gravely OEM# 04887600
  • Replaces John Deere OEM# TCU35393
  • Replaces Scag OEM# 483655, 482462, 481707
  • Replaces Toro OEM# 103-2518
  • Replaces Wright Mfg OEM# 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • Made in the USA in ISO 9001 certified plant
  • For Oregon version use part# 91-335
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-740
Each Price (6 or more): $23.85

Oregon's 20-1/2"
Gator G6 Heavy Duty Mulching Blade for several different brands of 60" mowers, from older Bad Boy, Gravely, Hustler, Toro, and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Excel OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Replaces Windsor OEM# 51-2805, 51-2800
  • Length: 20-1/2"
  • Center hole: 5/8"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Requires: (3) per 60" deck or (2) for 42" (Hustler/Excel 42" mowers only)
  • For our EMP version use part# 29-978
  • For Sunbelt Predator version use part# B1PD5009
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 94-055
Each Price (6 or more): $14.95

Oregon's 20-1/2" Medium Lift Heavy Duty Blade is
used on various mower brands with 60" mower decks. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution
  • Replaces Bad Boy OEM# 038-6060-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 603992, 603995, 608271, 607280
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Replaces Windsor OEM# 50-2814
  • Length: 20-1/2"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require: (3) for 60" deck
  • For our EMP version use EMP# 26-020
(May NOT fit all models- Check product description for exact OEM Part # match)
EMP's 20-1/2" T4 Mulching HD Blade 29-978 Oregon's 24-1/2" G6 Gator Mulching Blade 396-764 EMP's 24-1/2" Medium Lift Blade 26-241
24-1/2" Medium Lift Blade
Each Price $14.20
Part# 29-978
Each Price (6 to 29): $13.95
Each Price (30 or More): $13.45


EMP's 20-1/2" T4 Heavy Duty Mulching Blade for several different brands of 60" mowers, from older Bad Boy, Gravely, Hustler, Toro, and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.
  • Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Excel OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Replaces Windsor OEM# 51-2805, 51-2800
  • Length: 20-1/2"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Requires: (3) per 60" deck or (2) for 42" (Hustler/Excel 42" mowers only)
  • For Sunbelt's Predator version use part# B1PD5009
  • For Oregon's G6 version use part# 396-740
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-764
Each Price (6 or more): $29.95

Oregon's 24-1/2" Gator G6 HD Mulching Blade for various 72" Decks on several different brands of mowers. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length optimizes the cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Bad Boy OEM# 038-7220-00
  • Replaces Ferris OEM# 5022476
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 603992, 603995, 608271, 607280
  • Replaces Jacobsen OEM# 3970261
  • Replaces Scag OEM# 481709
  • Replaces Spartan OEM# 438-0003-00
  • Replaces Toro OEM# 105-7784, 105-7784-03, 108-1120
  • Replaces Windsor OEM# 50-3435
  • Length: 24-1/2"
  • Center hole: 5/8"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Requires (3) per 72" deck
  • High Lift for plenty of vacuum
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 26-241
Each Price (6 or More): $13.20
Each Price (30+): $12.70

EMP's 24-1/2" Medium Lift Blade is
used on various mower brands with 72" mower decks. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This standard blade is an OEM and aftermarket replacement blade for all the top brands, including Bad Boy, Hustler, Scag, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Bad Boy OEM# 038-7220-00
  • Replaces Ferris OEM# 5022476
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 603992, 603995, 608271, 607280
  • Replaces Jacobsen OEM# 3970261
  • Replaces Scag OEM# 481709
  • Replaces Spartan OEM# 438-0003-00
  • Replaces Toro OEM# 105-7784, 105-7784-03, 108-1120
  • Replaces Windsor OEM# 50-3435
  • Length: 24-1/2"
  • Blade Width: 2.50"
  • Blade Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Extended Cutting Edge
  • Require: (3) for 72" deck
  • Made in the USA in ISO 9001 certified plant
  • For our HD Version use EMP# 26-024
(May NOT fit all models- Check product description for exact OEM Part # match)
EMP's 24-1/2" Medium Lift HD Blade 26-024 8 Point Star Edger Blade 9" x 1/2" Oregon's 22-5/16" High Lift HD Blade 91-591
Part# 26-024
Each Price (6 to 29): $15.39
Each Price (30 or More): $14.89

EMP's 24-1/2" Medium Lift HD Blade is
used on various mower brands with 72" mower decks. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Bad Boy, Hustler, Scag, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Bad Boy OEM# 038-7220-00
  • Replaces Exmark OEM# 103-1581, 103-1581-S
  • Replaces Ferris OEM# 5022476
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 603992, 603995, 608271, 607280
  • Replaces Jacobsen OEM# 3970261
  • Replaces Scag OEM# 481709
  • Replaces Spartan OEM# 438-0003-00
  • Replaces Toro OEM# 105-7784, 105-7784-03, 108-1120
  • Replaces Windsor OEM# 50-3435
  • Length: 24-1/2"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Extended Cutting Edge
  • Require: (3) for 72" deck
  • Made in the USA in ISO 9001 certified plant
  • For our Standard version use EMP# 26-241
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 20-206

8 Point Star Edger Blade is produced from high carbon steel and heat treated to help extend the blade life. The edger blade is sharpened.
  • Replaces Jacobsen OEM# 309444
  • Blade Width: 9"
  • Blade Length: 9"
  • Center hole: 1/2"
  • Center to Center: 3-1/4"
  • Blade Thickness: .090"
  • 8 Tooth Sharpened Edge Blade
Part# 91-591
Each Price (6 or More): $14.95

Oregon's 22-5/16" High Lift Heavy Duty Mower Blade for Jacobsen AR-5, AR-522, AR-722T mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. Made to the exact OEM specification for optimum performance.
  • Replaces Jacobsen OEM# 4137186, 4163105, 4163106, 4124087
  • Length: 22-5/16"
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 1/2"
  • Offset: 1/8"
  • Requires (5) for 90" cut & (7) for 124" cut
(May NOT fit all models- Check product description for exact OEM Part # match)
Oregon's  23" G3 Gator Mulching Blade 96-795 Oregon's 23" G3 Gator Mulching Blade 96-696 Oregon's 23" Medium Lift Blade for Jacobsen 91-364
Part# 96-795
Each Price (6 or More): $26.95

Oregon's 23"
G3 Gator HD Mower Blade (Right Hand Cut) for Jacobsen HR511 Rotary Mower model. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
  • Replaces Jacobsen OEM# 391040, 4186582
  • Length: 23"
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 1/2"
  • Outer Holes: 7/16"
  • Center to Center: 2-7/8"
  • Requires (3) 96-795 and (4) 96-696 per mower
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 96-696
Each Price (6 or More): $26.95

Oregon's 23"
G3 Gator HD Mower Blade (Left Hand Cut) for Jacobsen HR511 Rotary Mower model. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
  • Replaces Jacobsen OEM# 391039
  • Length: 23"
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 1/2"
  • Outer Holes: 7/16"
  • Center to Center: 2-7/8"
  • Requires (3) 96-795 and (4) 96-696 per mower
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-364
Each Price (6 or More): $24.95

Oregon's 23" Medium Lift Heavy Duty Mower Blade (Right Hand Cut) for Jacobsen HR511 Rotary Mower model. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. Made to the exact OEM specification for optimum performance.
  • Replaces Jacobsen OEM# 391040, 4186582
  • Length: 23"
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 1/2"
  • Outer Holes: 7/16"
  • Center to Center: 2-7/8"
  • Requires (3) 91-364 and (4) 91-363 per mower
(May NOT fit all models- Check product description for exact OEM Part # match)
Oregon's 23" Medium Lift Blade for Jacobsen 91-363
Part# 91-363
Each Price (6 or More): $22.95

Oregon's 23" Medium Lift Heavy Duty Mower Blade (Left Hand Cut) for Jacobsen HR511 Rotary Mower model. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. Made to the exact OEM specification for optimum performance.
  • Replaces Jacobsen OEM# 391039
  • Length: 23"
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 1/2"
  • Outer Holes: 7/16"
  • Center to Center: 2-7/8"
  • Requires (3) 91-364 and (4) 91-363 per mower
(May NOT fit all models- Check product description for exact OEM Part # match)