You are here:Home > Blades > Blades by OEM Brand > Ariens/Gravely
We found 55 results matching your criteria.
14-1/2" Blades - (3) for 42" cut 16-1/4" Blades - (3) for 4 &, 48 Decks 17" Blades - (2) for 34 & (3) for 50" Decks
17-11/16" blades - (2) for 36" cut 18" Blades - ZT 2252 52" Deck 20-1/2" Blades - (2) for 40" cut; (3) for 60" cut
24-1/2" Blades - (3) for 72" cut
To receive discounted price on blades add item to cart and go to checkout to change the quantity. The price will automatically change based on the quantity ordered for each item. If you can't find your part listed or have questions, call us at (866)-516-6937
Sort By:
Page of 2
Oregon's 14-1/2" Gator G6 Mulching Blade 396-714 Oregon's 16-1/2" High Lift Blade 91-621 16-1/4"  Predator HD Mulching Blade B1PD5005
Part# 396-714
Each Price (6 or More): $20.25

Oregon's 14-1/2" Gator G6 HD Mulching Blade for 42" Dixie Chopper models. Also can be used on Bad Boy 42" Outlaw models, along with Ariens/Gravely 42" decks. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Ariens/Gravely OEM# 02961600
  • Replaces Bad Boy OEM# 038-4221-00, 038-4226-00
  • Replaces Dixie Chopper OEM# 30227-42, 63227-H, 63227-N
  • Length: 14-1/2"
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) for 42"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-621
Each Price (6 to 29): $12.25
Each Price (30 or More): $11.75

16-1/2" Oregon High Lift blade that's used on several brands of 32" and 48" mower decks. Oregon® 91-621 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge. X-Tended Cutting Length
optimizes the cutting efficiency with each revolution.
  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205
  • Replaces Encore OEM# 483035
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 601123, 795797, 795797X, 606252, 606252X
  • Replaces John Deere OEM# TCU34166, AM104489
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 48110, 481706, 482461, 482877, A48184
  • Replaces Toro OEM# 107-3195, 107-3195-03, 107-3196, 107-3196-03, 110-0415, 110-0416, 110-0417
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 3.00"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1PD5005
Each Price (6 or more): $15.50

16-1/4" Predator Series HD Mulching Blade for several different brands of 48" Mower decks. Such as: Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 48" deck or (2) per 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)
Oregon's 16-1/4" G3 Gator Mulching Blade 96-310 Oregon's 16-1/4" G6 Gator Mulching Blade 396-716 Oregon's 16-1/4" High Lift HD Blade 91-183
Part# 96-310
Each Price (6 or More): $13.95

Oregon's 16-1/4" G3 Gator Mulching Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203" high carbon steel
  • Requires (3) per 48" deck
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-716
Each Price (6 or more): $19.95

Oregon's 16-1/4" G6 Gator HD Mulching Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 3.00"
  • Blade Thickness: .250" high carbon steel
  • Requires (3) per 48" deck
  • High Lift for plenty of vacuum
  • Made in the USA in ISO 9001 plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-183
Each Price (6 or more): $12.95

16-1/4" Oregon High Lift HD Blade for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results
  • Replaces Bad Boy OEM# 038-4826-00
  • Replaces Bobcat/Ransome OEM# 112111-01, 32061, 32061A
  • Replaces Exmark OEM# 1-323515, 1-403026, 103-6583-S, 1036583, 323515, 403026
  • Replaces Ferris OEM# 5020843
  • Replaces Snapper/Kees OEM# 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250" High Carbon Steel
  • Requires (3) per 48" deck & (2) for 32" deck on Bad boy, Ferris, Ariens/Gravely, Husqvarna and Jacobsen
  • Made in the USA in ISO 9001 plant
  • Best choice for broad leaf grasses such as St Augustine and Fescue
(May NOT fit all models- Check product description for exact OEM Part # match)

16-1/4" T4 Mulcher HD Blade 16-1/4" EMP T4 Mulching Blade 29-005 Oregon's 16-1/4" Wavy Mulching Blade 91-368
16-1/4" T4 Mulching Blade
Each Price $13.45
Part# 29-905
Each Price (6 to 29): $12.95
Each Price (30 or More):
$12.45

EMP's 16-1/4" T4 Heavy Duty Mulching Blade
for several different brands of 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4827-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 21537, 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Requires (2) for 32" deck or (3) per 48" deck
  • For our Standard version use EMP# 29-005
  • Made in the USA in ISO 9001 certified plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 29-005
Each Price (6 or More): $12.95
Each Price (30 or More):
$12.45

EMP's 16-1/4" T4 Mulching Blade
for several different brands of 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4827-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .204" Hi-alloy Carbon Bar Steel
  • Requires (2) for 32" deck or (3) per 48" deck
  • For our Heavy Duty version use EMP# 29-905
  • Made in the USA in ISO 9001 certified plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

****Low Stock Alert, will be out soon*****
Part# 91-368
Each Price (6 or More): $13.50

Oregon's 16-1/4" Wavy Mulching Blade for several different brands of 48" mowers, from Ariens/Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution, an enhanced mulching for bagging and discharge efficiency.
  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6401, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: .250"
  • Blade Thickness: .203" high carbon steel
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

XHT 16-1/4" High Lift HD Blade B1BC1201 16-1/4" XHT Medium Lift Blade B1EM1805 16-1/4" XHT Medium Lift HD Blade B1FE1048
Part# B1BC1201
Each Price (6 or More): $13.75

16-1/4" XHT High Lift HD Blade
for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
  • Replaces Bad Boy OEM# 038-4820-00, 038-4826-00
  • Replaces Bobcat/Ransome OEM# 112111-01, 32061, 32061A
  • Replaces Exmark OEM# 1-323515, 1-403026, 103-6583-S, 1036583, 323515, 403026
  • Replaces Ferris OEM# 5020843
  • Replaces Snapper/Kees OEM# 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
  • Replaces Toro OEM# 103-2527
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Outer hole: 1/4
  • Requires (3) per 48" deck & (2) for 32" deck on Bad boy, Bobcat/Ransome, Ferris, Ariens/Gravely, Husqvarna and Jacobsen
  • Best choice for broad leaf grasses such as St Augustine and Fescue
(May NOT fit all models- Check product description for exact OEM Part # match)


Part# B1EM1805
Each Price (6 or more) $13.50

16-1/4" XHT Medium Lift Blade
for several brands of 48" mower decks such as Ariens/Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.
  • Replaces Ariens/Gravely OEM# 00273000, 04920600
  • Replaces Bad Boy OEM# 038-4826-00
  • Replaces Exmark OEM# 1-323515, 1-403026, 103-6583, 103-6583-S
  • Replaces Ferris OEM# 5020843
  • Replaces Husqvarna OEM# 539100340
  • Replaces Simplicity/Snapper OEM# 5020843, 5020843SM
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Require (3) for 48" deck or (2) for 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1FE1048
Each Price (6 or more): $13.50

16-1/4" XHT Replacement Medium Lift HD Blade used on Ferris mowers with 48" iCD mower decks. But can also be used on several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness. This blade does have the new style lift extension, where the length of the lift goes from the standard size to 4" long.
  • Replaces Bad Boy OEM# 038-3000-00, 038-4820-00
  • Replaces Bobcat OEM# WMTA3206, WMTA32061
  • Replaces Ferris OEM# 5101986, 5101986BM, 5101986BMYP
  • Replaces Gravely OEM# 04919100
  • Replaces Husqvarna OEM# 539100340
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5101986BMYP
  • Replaces Toro OEM# 103-2517, 103-2527
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (2) for 32" or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)
17 29/32" XHT Wavy Mulching Blade B1EM1810 17" High Lift HD Blade 17" Predator Series HD Mulching Blade B1PD2007
17" High Lift HD Blade
Each Price $14.40
Part# B1EM1810
Each Price (6 or More): $12.50

17-29/32" XHT Wavy Mulching Blade for older 36" and 52" Exmark mower models. But it can also replace several other brands of mowers with the same deck sizes, such as:
Ariens/Gravely, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. XHT blades also offer greater impact toughness.
  • Replaces Exmark OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Length: 17-29/32"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

****FOR AN 18" WAVY MULCHING BLADE USE EMP BLADE# 28-618***.
  • Best choice for thinner blade grasses such as Bluegrass, Rye and Zoysia
  • 17" Length, 5/8" center hole, 2.50" width, .250 material
  • (3) for 50"

    For larger picture, detailed specs & OEM #s (See more info below)


    Our Part # 91-505

    Each Price (6 to 29): $13.40


Part# B1PD2007
Each Price (6 or More): $17.95

17" Predator Series Heavy Duty Mulching Blade
for various brands using 32" & 50" mower decks, such as Dixie Chopper, Dixon, Gravely, and Husqvarna. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50X
  • Replaces Dixon OEM# 539129743
  • Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
  • Replaces Husqvarna OEM# 581055501
  • Replaces Toro OEM# 11-3579, 11-3579-09
  • Length: 17"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 32" or (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)
17" G6 Fusion HD Mulching Blade Oregon's 17" Gator G3 Mulching Blade 96-323 17" EMP Low Lift Blade 26-417
17" Low Lift Blade
Each Price $11.50
  • 17" Length, 5/8" Center Hole, 3.0" Width
  • Manufactured from .250 high carbon steel
  • (3) for 50", (2) for 34" cut

    For larger picture, detailed specs & OEM #s (See more info below)


    Our Part # 396-723

    Each Price (6 or more): $22.78
Part# 96-323
Each Price (6 or More): $14.95

Oregon's 17" Gator G3 Mulching Blade for various brands using 32" & 50" mower decks. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V
  • Replaces Dixon OEM# 539129743
  • Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
  • Replaces Husqvarna OEM# 581055501
  • Replaces Toro OEM# 11-3579, 11-3579-09
  • Length: 17"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 32" or (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 26-417
Each Price (6 or More): $10.50
Each Price (30+): $10.00

EMP's 17" Low Lift Blade used on 50" decks on various Dixie Chopper mower models. It can also be used on 34" & 50" Ariens mower decks. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Low lift blades are the best choice for Bahia and Floratam St. Augustine grasses. Use in sparse, rough, and sandy conditions to reduce wear on your mower deck and blades. Not to use with bagging systems. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Dixie Chopper OEM# 30227-50
  • Replaces Ariens OEM# 08861600
  • Length: 17"
  • Blade Width: 2.50"
  • Blade Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • (3) for 50" deck
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)
Oregon's 17" X-style High Lift Blade 91-525 18" Predator Series HD Mulching Blade B1PD5008 18" G6 Gator HD Mulching Blade 396-726
Part# 91-525
Each Price: $13.25

Oregon's 17" X-style High Lift HD Blade for Dixie Chopper 50" decks on Iron Eagle and Silver Eagle models among others.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.
  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50X
  • Length: 17"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1PD5008
Each Price (6 or More): $14.53

18" Predator Series HD Mulching Blade is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-726
Each Price (6 or more): $21.95

Oregon's 18" G6 Gator HD Mulching Blade is used on several brands of 36" and 52" mower models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52
(May NOT fit all models- Check product description for exact OEM Part # match)
18" G3 Gator Mulching Blade 96-344 18" EMP High Lift HD Blade 26-003 18" EMP Medium Lift HD Blade 26-018
18" High Lift HD Blade
Each Price $13.21
18" Medium Lift HD Blade
Each Price $13.21
Part# 96-344
Each Price (6 or More): $14.85

Oregon's 18" Gator G3 Mulching Blade is used on several brands of 36" and 52" mower models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 26-003
Each Price (6 to 29): $12.21
Each Price (30 or more): $11.71

EMP's 18" High Lift Heavy Duty Blade is used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands
  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 26-018
Each Price (6 to 29): $12.21
Each Price (30 or More):
$11.71


EMP's 18" Medium Lift Heavy Duty Blade thats used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made 100% Hi-carbon alloy steelp specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness and impact resistance. And are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer staightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. 4 out 5 customers prefer our brand of blades over all the aftermarket brands
  • Replaces Bad Boy OEM# 038-5202-00, 038-3010-00, 038-3000-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S
  • Replaces Ferris OEM# 1521227, 1521227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208
  • Replaces Scag OEM# 48108, 481711
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

18" Oregon High Lift HD Blade 91-184 18" Oregon Low Lift HD Blade 91-235 18" Oregon Mulching Blade 91-335
18" Oregon Mulching Blade
Each Price $13.95
Part# 91-184
Each Price (6 to 29): $12.75
Each Price (30 or More): $12.25

18" Oregon High Lift HD Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-235
Each Price (6 or More): $16.95

18" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.
  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Ferris OEM# 1521227, 5021227
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# AM104490, PT11136
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-335
Each Price (6 or More): $12.95

18" Oregon Wavy Mulching Blade
that's used on several brands of 36" and 52" mower models. The Oregon wavy mulching blade delivers a cleaner cut and quality results. Oregon replacement lawn mower blades are made to the exact OEM specification for optimum performance. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
  • Replaces Bad Boy OEM# 038-5215-00
  • Replaces Bobcat/Ransome OEM# WM132022
  • Replaces Exmark/Toro OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Gravely OEM# 04887600
  • Replaces John Deere OEM# TCU35393
  • Replaces Scag OEM# 483655, 482462, 481707
  • Replaces Toro OEM# 103-2518
  • Replaces Wright Mfg OEM# 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For EMP's version use part# 28-618
(May NOT fit all models- Check product description for exact OEM Part # match)

EMP's 18" T4 Heavy Duty Mulching Blade  29-945 EMP's 18" T4 Mulching Blade 29-045 EMP's 18" Wavy Mulching Blade 28-618
18" T4 HD Mulching Blade
Each Price $13.95
18" T4 Mulching Blade
Each Price $12.95
18" Wavy Mulching Blade
Each Price $12.95
Part# 29-945
Each Price (6 to 29): $12.95
Each Price (30 or More): $12.45

EMP's 18" T4 Heavy Duty Mulching Blade
is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For our standard version use EMP# 29-045
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 29-045
Each Price (6 to 29): $11.95
Each Price (30 or more): $11.45

EMP's 18" T4 Mulching Blade
is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For our Heavy Duty version use EMP# 29-945
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 28-618
Each Price (6 or More): $11.95
Each Price (30+): $11.45

EMP's 18" Wavy Mulching Blade
is used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. This standard wavy mulching blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Bad Boy OEM# 038-5215-00
  • Replaces Bobcat/Ransome OEM# WM132022
  • Replaces Exmark/Toro OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Gravely OEM# 04887600
  • Replaces John Deere OEM# TCU35393
  • Replaces Scag OEM# 483655, 482462, 481707
  • Replaces Toro OEM# 103-2518
  • Replaces Wright Mfg OEM# 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • Made in the USA in ISO 9001 certified plant
  • For Oregon version use part# 91-335
(May NOT fit all models- Check product description for exact OEM Part # match)