15-3/8" Gator G5 Mulching Blade
594-601 Oregon 15-3/8" Gator G5 Blade
Oregon 15-3/8" Gator G5 Blade
 
Alternative Views:


Part# 594-601
15-3/8" Oregon Gator G5 Mulching Blade used on 30" Exmark Commercial Walk-Behinds and Toro TimeMaster models. This blade is 3" wide compared to the original which is 2-1/4" wide. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
  • Replaces Exmark OEM# 116-6358, 116-6358-03, 116-6358-S
  • Replaces Toro OEM# 116-6358-03, 116-6358-S, 120-9500-03
  • Blade Width: 3.00"
  • Blade Thickness: .134"
  • Center hole: 5/8"
  • Outer hole: 5/16"
  • Offset: 5/16"
  • Air Lift: 1"
  • Requires (2) per 30"
Each Price $20.25
Sale Price: $17.95
You save $2.30!


Availability: Usually Ships in 24 Hours
Qty:

  
Description Models & OEM Cross-Reference #'s
 
15-3/8" Oregon Gator G5 Mulching Blade used on 30" Exmark Commercial Walk-Behinds and Toro TimeMaster models. This blade is 3" wide compared to the original which is 2-1/4" wide. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
  • Replaces Exmark OEM# 116-6358, 116-6358-03, 116-6358-S
  • Replaces Toro OEM# 116-6358-03, 116-6358-S, 120-9500-03
  • Blade Width: 3.00"
  • Blade Thickness: .134"
  • Center hole: 5/8"
  • Outer hole: 5/16"
  • Offset: 5/16"
  • Air Lift: 1"
  • Requires (2) per 30"
(May NOT fit all models- Check product description for exact OEM Part # match)