You are here:Home > Blades > Blades by Deck Size
We found 324 results matching your criteria.
16' 21" 27" 30" 32" 34"
36" 38" 40" 42" 44" 46"
48" 50" 52" 54" 56" 60"
61" 62" 66" 71" 72" 74"
Sort By:
Page of 11
108-4081 Oregon's 14" G3 Gator Mulching Blade: Toro 96-374 14" Gator G3 Mulching Blade

14" Oregon Gator G3 Mulching Blade used on Toro 40" Grandstand models with Turbo Force decks. Superior mulching means fewer bag stops, cleaner side discharge and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results. It’s not a replacement, it’s an upgrade.

  • Replaces Toro OEM# 108-4081, 108-4081-03, 108-4089-03, 108-4110-03, 108-4111-03, 108-4112-03, 114-4961, 114-4962, 114-4963, 114-4964, 114-4965
  • Length: 14"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $20.35
539119853 14-1/2" Oregon Gator G3 Mulching Blade: Dixon 96-303 14-1/2" Gator G3 Mulching Blade

14-1/2" Oregon Gator G3 Mulching Blade used on older Dixon 42" models. Increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

  • Replaces Dixon OEM# 13938, 8688, 539119853, 539126275
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 11/16"
  • Air Lift: 1"
  • Require (3) for 42" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.95
30227-42 14-1/2" Oregon Gator G6 Blade: Dixie Chopper 396-714 14-1/2" Gator G6 Mulching Blade

14-1/2" Oregon Gator G6 Heavy Duty Mulching Blade for 42" Dixie Chopper models. Also can be used on Bad Boy 42" Outlaw models, along with Ariens/Gravely 42" decks. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Ariens/Gravely OEM# 02961600
  • Replaces Bad Boy OEM# 038-4222-00, 038-4226-00
  • Replaces Dixie Chopper OEM# 30227-42, 63227-H, 63227-N
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) for 42"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $22.40
320235 15" Oregon Gator G3 Mulching Blade: Grasshopper 96-343 15" Gator G3 Mulching Blade

15" Oregon Gator G3 Mulching Blade for 44" Grasshopper Front Mount Deck models. Also used on Country Clipper 42" & 44" decks on Boss, Charger, JaZee, SR1025, SR375 and Trek Hydro mower models. Also used on Woods 44" decks on 1250, 1850, 1855, 2855, 5120, 5140, 5180, 5182, 5200, 5210, 5215, 5250, 6170, D14414T, D4414, D4414-3 mower models.

  • Replaces Country Clipper OEM# H-1665, H-1715, H-2013
  • Replaces Grasshopper OEM# 320231, 320233, 320234, 320235, 320320
  • Replaces Woods OEM# 70014, 70062KT, 7014KT, 72896KT
  • Length: 15"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 1/2"
  • Offset: 5/16"
  • Requires: (3) for 44" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.85
320234 15" Oregon High Lift Blade: Grasshopper 91-536 15" High Lift HD Blade

15" Oregon High Lift HD Blade used on 44" Grasshopper models. Also used on various 48" Front and Mid Mount Deck Grasshopper models. Also used on early Country Clipper and Woods models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Grasshopper OEM# 320232, 320234
  • Replaces Country Clipper OEM# H-1665, H-1715, H-2013
  • Replaces Woods OEM# 70014, 70062KT, 7014KT, 72896KT
  • Length: 15"
  • Center hole: 1/2"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Offset: 5/16"
  • Air Lift: 1"
  • Requires (3) per 44" deck or (1) 91-536 & (2) 91-532 for 48" Grasshopper only
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.65
320231 15" Oregon Low Lift HD Blade: Grasshopper 91-557 15" Low Lift HD Blade

15" Oregon Low Lift Heavy Duty Blade used on 44" Grasshopper models. Also used on various 48" Front and Mid Mount Deck Grasshopper models. Also used on early Country Clipper and Woods models. Oregon has 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly and delivers a clean cut for quality results.

  • Replaces Country Clipper OEM# H-1665, H-1715, H-2013
  • Replaces Grasshopper OEM# 320231, 320233, 320235, 320320
  • Replaces Woods OEM# 70014, 70062KT, 7014KT, 72896KT
  • Length: 15"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 1/2"
  • Offset: 5/16"
  • Air Lift: 3/4"
  • Requires (3) per 44" deck or (1) 91-536 & (2) 91-532 for 48" Grasshopper only
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.25
5061827 15" XHT Medium Lift HD Blade: Ferris B1FE1044 15" Medium Lift HD Blade

15" XHT Medium Lift Heavy Duty Blade for 44" Ferris IS500Z and IS1500Z mower models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard OEM lawnmower blades. Benefits of using the XHT blade are sharper and longer lasting cutting edges. Along with more resistance to bending, XHT blades offer greater impact.

  • Replaces Ferris OEM# 5061827, 5061827S, 5061827YP
  • Length: 15"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 44" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $18.95
5061827, 5061827S Ferris: 15" Predator Blade B1PD5144 15" Predator HD Mulching Blade

15" Predator Series Heavy Duty Mulching Blade for 44" Ferris IS500Z & IS1500Z Series models. Also used on 44" Simplicity ZT4000 Series models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Ferris OEM# 5061827, 5061827S, 5061827YP
  • Replaces Simplicity OEM# 5061827SSM
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 44"
(Check our Models & OEM Cross-Reference #'s section to find your model#)

Our Price: $18.95
55-4940 15-1/2" Oregon High Lift Blade: Toro 94-039 15-1/2" High Lift Blade

15-1/2" Oregon High Lift Blade for various 44" Toro SFS decks on models 117, 120 Groundsmaster, TimeCutter ZX, XL440H Tractors, and Proline Pistol Grip Hydro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Toro OEM# 108-1125, 44-5480, 55-4940, 55-4940-03, 55-4940-09
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Offset: 5/16"
  • Requires (3) per 44" deck
  • Oregon has discontinued this blade, in stock while supplies last
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.95
106-0627, 106-0630 15-1/2" Predator Mulching Blade: Toro B1PD5051 15-1/2" Predator Mulching Blade

15-1/2" Predator Series Mulching Blade used on various Toro 44" decks such as TimeCutter Z, TimeCutter ZX440, Proline Walk-behind w/ SFS Side Discharge, Pro Lawn Tractor, Z149 Z Master and Groundsmaster 117 and 1144 models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Toro OEM# 106-0627, 106-0630, 54-0010, 54-0010-03, 54-0010-09, 55-4940
  • Length: 15-1/2"
  • Width: 2.50"
  • Thickness: .197"
  • Center hole: 5/8"
  • Requires (3) per 44" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.95
103-2529-S 15-1/4" Oregon OE Style High Lift Blade: Exmark 91-369 15-1/4" OE Style High Lift Blade

15-1/4" Oregon OE Style High Lift Blade for 44" Exmark Lazer Z CT, Lazer Z HP, Phazer. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly which delivers a clean cut for quality results.

  • Replaces Exmark OEM# 103-2529-S, 103-2529S, 1-653101
  • Length: 15-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Requires (3) per 44" deck
  • Best choice for broad leaf grasses such as Saint Augustine and Fescue
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.10
15-1/8" Oregon Medium Lift Blade 92-142 15-1/8" Medium Lift Blade

15-1/8" Oregon Medium Lift Blade used on 42" Dixie Chopper Zee 1 also used on 44" Bush Hog models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

  • Replaces Dixie Chopper OEM# 300632, 301067
  • Replaces Bush Hog OEM# 50056493
  • Length: 15-1/8"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 1/2"
  • Requires (3) for 42" cut & (3) for 44" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.50
784256, 785728 15-11/16" Oregon Medium Lift Blade: Hustler 90-205 15-11/16" Medium Lift Blade

15-11/16" Oregon Medium Lift Blade used on 44" Hustler FasTrak, Super Mini Z, Mini Z models. Can also be used on 44" Land Pride models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

  • Replaces Hustler OEM# 784256, 785728, 787739, 794693, 796300
  • Replaces Land Pride OEM# 839-267C
  • Length: 15-11/16"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Air Lift: 13/16"
  • Requires: (3) for 44" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.50
594-601 Oregon 15-3/8" Gator G5 Blade 15-3/8" Gator G5 Mulching Blade

15-3/8" Oregon Gator G5 Mulching Blade used on 30" Exmark Commercial Walk-Behinds and Toro TimeMaster models. This blade is 3" wide compared to the original which is 2-1/4" wide. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.

  • Replaces Exmark OEM# 116-6358, 116-6358-03, 116-6358-S
  • Replaces Toro OEM# 116-6358-03, 116-6358-S, 120-9500-03
  • Blade Width: 3.00"
  • Blade Thickness: .134"
  • Center hole: 5/8"
  • Outer hole: 5/16"
  • Offset: 5/16"
  • Air Lift: 1"
  • Requires (2) per 30"
(May NOT fit all models- Check product description for exact OEM Part # match)

Sale Price: $17.95
15-5/8" XHT Medium Lift Blade B1HS1001 15-5/8" Medium Lift Blade

15-5/8" XHT Medium Lift Blade used on 44" Hustler Fas Trak, Super Mini Z, Mini Z models. Can also be used on 44" Landpride models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Hustler OEM# 784256, 785728, 787739, 794693, 796300
  • Replaces Landpride OEM# 839-267C
  • Length: 15-5/8"
  • Width: 2.50"
  • Thickness: .197"
  • Center Hole: 5/8"
  • Requires: (3) for 44" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $11.50
16 1/2" EMP Medium Lift HD Blade 26-061 16 1/2" Medium Lift HD Blade

16-1/2" EMP Medium Lift Heavy Duty Blade thats used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Lesco, Scag, Toro, Wright Mfg, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler OEM# 601014, 601123, 795757
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.95
96-308 Oregon 16-1/2" Gator G3 Mulching Blade 16-1/2" Gator G3 Mulching Blade

16-1/2" Oregon Gator G3 Mulching Blade used on 48" models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757, 796631
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Air Lift: 1"
  • Requires: (2) for 32" or (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.50
16.5" Oregon Gator G6 Mulching Blade 391-614 16-1/2" Gator G6 HD Mulching Blade

16-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Simplicity and Snapper models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Simplicity/Snapper OEM# 1759055YP
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 3/4"
  • Air Lift: 1"
  • Requires: (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $23.95
16-1/2" Oregon High Lift Blade 91-620 16-1/2" High Lift Blade

16-1/2" Oregon High Lift Blade used on several brands 48" mower decks. Such as Hustler, Scag, Wright Mfg. and more. Oregon® 91-620 blade for lawn mowers are created to provide consistency and longevity, while delivering a cleaner cut and quality results. Oregon's High-lift aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency.
  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205
  • Replaces Encore OEM# 483035
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 601123, 795797, 795797X, 606252, 606252X
  • Replaces John Deere OEM# TCU34166, AM104489
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 48110, 481706, 482461, 482877
  • Replaces Toro OEM# 107-3196-03, 133-2137
  • Replaces Wright Mfg. OEM# 71440002
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (2) for 32" or (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Sale Price: $10.25
16-1/2" Stens High Lift Blade 325-278 16-1/2" High Lift Blade

16-1/2" High Lift Blade used on 48" Cub Cadet ZForce (53AA5A7M710) and (53AA5A7M712) ZTR models.

  • Replaces Cub Cadet OEM# 01004772
  • Length: 16-1/2"
  • Width: 3.00"
  • Thick: .203"
  • Center Hole: 3/4
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.95
16-1/2" EMP High Lift Heavy Duty Blade 26-004 16-1/2" High Lift HD Blade

16-1/2" EMP High Lift Heavy Duty Blade used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, John Deere, Scag, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205, PL4855
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler OEM# 601014, 601123, 795757, 606252
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Snapper/Kees OEM# 1-7043, 7075771, 7075771BZ, 7075771BZYP
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Sale Price: $12.50
16-1/2" Oregon High Lift HD Blade 92-036 16-1/2" High Lift HD Blade

16-1/2" Oregon High Lift Heavy Duty Blade used on various 48" models. Such as Bad Boy, BigDog, Hustler, John Deere, Scag, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205, PL4855
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler/BigDog OEM# 601014, 601123, 795757, 606252
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Snapper/Kees OEM# 1-7043, 7075771, 7075771BZ, 7075771BZYP
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (2) per 32" or (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $16.95
16-1/2" EMP T4 HD Mulching Blade 29-912 16-1/2" T4 HD Mulching Blade

16-1/2" EMP T4 Heavy Duty Mulching Blade for several different brands for several different brands of 32" and 48" mowers, from Bad Boy, Gravely/Great Dane, Scag, Toro, Wright Mfg and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Length: 16-1/2"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Requires: (2) for 32" or (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.50
16-1/4"  Predator HD Mulching Blade B1PD5005 16-1/4" Predator HD Mulching Blade

16-1/4" Predator Series HD Mulching Blade for several brands of 32" and 48" Mower decks. Used on Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4820-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 48" deck or (2) per 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
96-310 Oregon 16-1/4" Gator G3 Mulching Blade 16-1/4" Gator G3 Mulching Blade

16-1/4" Oregon Gator G3 Mulching Blade used on different brands of 48" models, from Ariens, Gravely, Bad Boy, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Requires: (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.50
16-1/4" Oregon Gator G3 Mulching Blade 96-321 16-1/4" Gator G3 Mulching Blade

16-1/4" Oregon Gator G3 Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
  • Replaces Toro OEM# 109-6873
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Requires: (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.95
16-1/4" Oregon Gator G6 Blade 396-716 16-1/4" Gator G6 Mulching Blade

16-1/4" Oregon Gator G6 HD Mulching Blade used on several brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (3) per 48"
  • if out of stock try our EMP# 29-905
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $22.25
16-1/4" Oregon Gator G6 HD Mulching Blade 396-321 16-1/4" Gator G6 Mulching Blade

16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
  • Replaces Toro OEM# 109-6873
  • Length: 16-1/4"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 15/16"
  • Requires (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.95
392-205 Oregon 16-1/4" Gator G6 Blade 16-1/4" Gator G6 Mulching Blade

16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 46" Exmark Triton deck models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. It’s not a replacement blade, It’s an upgrade.

  • Replaces Exmark OEM# 103-8251, 103-8296, 109-6460, 116-5496-S
  • Center hole: 15/16"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Offset: 3/8"
  • Requires (3) per 46" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $23.15