Part# 96-749
20-1/2" Oregon Gator G3 Mulching Blade used on 60" Exmark and new Toro models. Blade center hole requires a splined blade bushing. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

• Replaces Exmark OEM# 103-6398, 103-6398-S, 116-5174, 116-5174-S
• Width: 2.50"
• Thickness: .203"
• Center hole: 15/16"
• Air Lift: 1"
• Requires: (3) for 60" cut

Part# 392-025
20-1/2" Oregon Gator G6 Heavy Duty Mulching Blade for 60" decks used on various Exmark and new Toro models only, using the large center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces Exmark OEM# 103-6398, 103-6398-S, 116-5174, 116-5174-S
• Length: 20-1/2"
• Width: 3.00"
• Thickness: .250"
• Center hole: 15/16"
• Air Lift: 1"
• Requires (3) for 60"

Part# B1LE1880

20-1/2" Lazer Edge Self Sharpening Notched Blade used on 60" Exmark and newer Toro models. Blade has large center hole and require a spline blade bolt bushing. Utilizing EverSharp™ technology these hardened steel blades deliver superior performance and actually get sharper during use, resulting in minimal maintenance and maximum profitability for landscaping professionals. In abrasive conditions, a blade can get dull in as little as four hours. After putting the blade to work for 50 hours, the results were clear. The LaserEdge® blade edge was still sharp, and the untreated side was dulled and worn away.

• Replaces Exmark OEM# 103-6403
• Replaces Toro OEM# 140-1240
• Width: 2.50"
• Thickness: .197"
• Air Lift: 1"
• Center hole: 15/16"
• Requires (3) for 60"

Part# 26-721
20-1/2" EMP Medium Lift Heavy Duty Blade used on 60" Exmark and new style Toro models. Blade has large center hole and require a spline blade bolt bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Exmark OEM# 103-6383, 103-6403
• Replaces Toro OEM# 140-1240
• Width: 2.50"
• Thickness: .250" Hi-alloy Carbon Bar Steel
• Center Hole: 15/16"
• Requires (3) per 60"
• Made in the USA in ISO 9001 certified plant

Part# 792-031
20-1/2" Oregon Standard Lift Blade used on 60" Exmark Lazer Z, Radius and more. Also used on new 60" Toro Z Master, Grandstand models using 15/16"CH with a splined blade bushing. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

• Replaces Exmark OEM# 103-6403, 103-6403-S
• Replaces Toro OEM# 140-1240
• Width: 2.50"
• Thickness: .203"
• Center hole: 15/16"
• Air Lift: 1"
• Requires (3) for 60"

Part# 29-720
20-1/2" EMP T4 Heavy Duty Mulching Blade used on 60" Exmark and new style Toro models. Blade has large center hole and require a spline blade bolt bushing. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Exmark OEM# 103-6393, 103-6398, 116-5174, 116-5174
• Width: 2.50"
• Thickness: .250" Hi-alloy Carbon Bar Steel
• Center hole: 15/16"
• Requires (3) per 60"

Part# 92-028
20-1/2" Oregon Wavy Mulching Blade used on 60" Exmark and new Toro models only and that use the large center hole and require a splined blade bushing. The Oregon wavy mulching blade delivers a cleaner cut and quality results. Oregon replacement lawn mower blades are made to the exact OEM specification for optimum performance. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

• Replaces Exmark OEM# 103-6393, 103-6393-S
• Replaces Toro OEM# 140-1240
• Length: 20-1/2"
• Blade Width: 3.00"
• Blade Thickness: .204"
• Center hole: 15/16"
• Require (3) for 60" cut

Part# 28-120
20-1/2" EMP Wavy Mulching Blade used on 60" Exmark Lazer Z, Radius, Turf Tracer models and more. Also used on new Toro Z Master & GrandStand models with 15/16" center holes with a splined blade bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. This standard wavy mulching blade replaces the Exmark and Toro mulch kit blades and all the aftermarket brands. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Exmark OEM# 103-6393, 103-6393-S
• Replaces Toro OEM# 140-1240
• Blade Width: 2.50"
• Blade Thickness: .204"
• Center hole: 15/16"
• Require (3) per 60"
• Made in the USA ISO 9001 certified plant

Part# B1EM1880
20-1/2" XHT Notched Heavy Duty Blade used on 60" Exmark and newer Toro models. Blade has large center hole and require a spline blade bolt bushing. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.

• Replaces Exmark OEM# 103-6383
• Replaces Toro OEM# 140-1240
• Width: 2.50"
• Thickness: .250"
• Air Lift: 1"
• Center hole: 15/16"
• Requires (3) for 60"

Part# B1EM93

Blade Bushing used on Exmark model blades with 15/16" Center Holes. Such models as Lazer Z, Radius, Vantage, Turf Tracer Series and more.

• Replaces Exmark OEM# 103-3037
• Height: 1.165"
  
• OD: 1.760"
• ID: 0.515"