You are here:Home > Blades > Blades by OEM Brand > Bad Boy > 18" Blades - (2) for 36" cut
We found 16 results matching your criteria.
  • Click on "more info" to see OEM #'s and Model Applications
  • To receive discounted price on blades add item to cart and go to checkout to change the quantity. The price will automatically change based on the quantity ordered for each item.
  • If you can't find your part listed or have questions, call us at (866)-516-6937
Sort By:
Page of 1
17 29/32" XHT Wavy Mulching Blade B1EM1810 18" Predator Series HD Mulching Blade B1PD5008 18" G6 Gator HD Mulching Blade 396-726
Part# B1EM1810
Each Price (6 or More): $12.50

17-29/32" XHT Wavy Mulching Blade for older 36" and 52" Exmark mower models. But it can also replace several other brands of mowers with the same deck sizes, such as:
Ariens/Gravely, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. XHT blades also offer greater impact toughness.
  • Replaces Exmark OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Length: 17-29/32"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

****FOR AN 18" WAVY MULCHING BLADE USE EMP BLADE# 28-618***.
Part# B1PD5008
Each Price (6 or More): $14.53

18" Predator Series HD Mulching Blade is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-726
Each Price (6 or more): $21.95

Oregon's 18" G6 Gator HD Mulching Blade is used on several brands of 36" and 52" mower models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52
(May NOT fit all models- Check product description for exact OEM Part # match)
18" G3 Gator Mulching Blade 96-344 18" Oregon Extended High Lift Blade 91-623 18" EMP High Lift Heavy Duty Blade 26-003
18" High Lift Blade
Our Price: $13.50
18" High Lift HD Blade
Each Price $13.21
Part# 96-344
Each Price (6 or More): $14.85

Oregon's 18" Gator G3 Mulching Blade is used on several brands of 36" and 52" mower models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities. Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-623
Each Price (6 or more): $12.50


18" Oregon High Lift Blade was designed for 36"/52" Scag and Ferris mowers, but can used on several brands of 36" and 52" mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution
  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 5021227, 5021227S, 5021227X2, 5101756S, 5101756X2, 5103304S, 5103304X2
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 363055, 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 481707, 482462, 482878, 482961
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 3.00"
  • Thickness: .203"
  • Air Lift: 1-1/2" (Extended High Lift)
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 26-003
Each Price (6 to 29): $12.21
Each Price (30 or more): $11.71

EMP's 18" High Lift Heavy Duty Blade is used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands
  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)
18" EMP Medium Lift HD Blade 26-018 18" Oregon High Lift HD Blade 91-184 18" Oregon Low Lift HD Blade 91-235
18" Medium Lift HD Blade
Each Price $13.21
Part# 26-018
Each Price (6 to 29): $12.21
Each Price (30 or More):
$11.71


EMP's 18" Medium Lift Heavy Duty Blade thats used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made 100% Hi-carbon alloy steelp specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness and impact resistance. And are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer staightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. 4 out 5 customers prefer our brand of blades over all the aftermarket brands
  • Replaces Bad Boy OEM# 038-5202-00, 038-3010-00, 038-3000-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S
  • Replaces Ferris OEM# 1521227, 1521227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208
  • Replaces Scag OEM# 48108, 481711
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 91-184
Each Price (6 to 29): $12.75
Each Price (30 or More): $12.25

18" Oregon High Lift HD Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 363055, 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-235
Each Price (6 or More): $16.95

18" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.
  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Ferris OEM# 1521227, 5021227
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# AM104490, PT11136
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
18" Oregon Medium Lift Blade 91-622 18" Oregon Mulching Blade 91-335 EMP's 18" T4 Heavy Duty Mulching Blade  29-945
18" Oregon Mulching Blade
Each Price $13.95
18" T4 HD Mulching Blade
Each Price $13.95
Part# 91-622
Each Price (6 to 29): $10.95
Each Price (30 or More): $10.45


18" Oregon Medium Lift Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 1-633482, 103-2528, 1-306283, 103-6584
  • Replaces Ferris OEM# 5021227, 5021227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 91-335
Each Price (6 or More): $12.95

18" Oregon Wavy Mulching Blade
that's used on several brands of 36" and 52" mower models. The Oregon wavy mulching blade delivers a cleaner cut and quality results. Oregon replacement lawn mower blades are made to the exact OEM specification for optimum performance. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
  • Replaces Bad Boy OEM# 038-5215-00
  • Replaces Bobcat/Ransome OEM# WM132022
  • Replaces Exmark/Toro OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Gravely OEM# 04887600
  • Replaces John Deere OEM# TCU35393
  • Replaces Scag OEM# 483655, 482462, 481707
  • Replaces Toro OEM# 103-2518
  • Replaces Wright Mfg OEM# 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For EMP's version use part# 28-618
(May NOT fit all models- Check product description for exact OEM Part # match)

Part# 29-945
Each Price (6 to 29): $12.95
Each Price (30 or More): $12.45

EMP's 18" T4 Heavy Duty Mulching Blade
is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For our standard version use EMP# 29-045
(May NOT fit all models- Check product description for exact OEM Part # match)
EMP's 18" T4 Mulching Blade 29-045 EMP's 18" Wavy Mulching Blade 28-618 18" XHT High Lift HD Blade B1BC1202
18" T4 Mulching Blade
Each Price $12.95
18" Wavy Mulching Blade
Each Price $12.95
Part# 29-045
Each Price (6 to 29): $11.95
Each Price (30 or more): $11.45

EMP's 18" T4 Mulching Blade
is used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • For our Heavy Duty version use EMP# 29-945
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 28-618
Each Price (6 or More): $11.95
Each Price (30+): $11.45

EMP's 18" Wavy Mulching Blade
is used on several brands of 36" and 52" mower models. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. This standard wavy mulching blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.
  • Replaces Bad Boy OEM# 038-5215-00
  • Replaces Bobcat/Ransome OEM# WM132022
  • Replaces Exmark/Toro OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Gravely OEM# 04887600
  • Replaces John Deere OEM# TCU35393
  • Replaces Scag OEM# 483655, 482462, 481707
  • Replaces Toro OEM# 103-2518
  • Replaces Wright Mfg OEM# 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
  • Made in the USA in ISO 9001 certified plant
  • For Oregon version use part# 91-335
(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1BC1202
Each Price (6 or more): $12.50
Each Price (30 or more): $12.00

18" XHT High Lift HD Blade thats used on several brands of 36" and 52" mower models. But it can also replace several other brands of mowers with the same deck sizes, such as:
Bad Boy, Bobcat, older Exmark, Ferris, Great Dane, Husqvarna, Snapper, Scag, John Deere, Toro, Wright Stander and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.
  • Replaces Bobcat OEM# 112111-02, 32022A
  • Replaces Exmark OEM# 1-303283, 103-6584-S, 1-633482
  • Replaces Bad Boy OEM# 038-5202-00, 038-3010-00
  • Replaces Scag OEM# 48108, 481707, 482462, 482878,481711
  • Replaces Ferris OEM# 1521227, 5021227, 5021227S, 5101756
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800, 0450300
  • Replaces Husqvarna OEM# 539100341, 539101485
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751, 7075751, 7075751BZ, 7075751BZYP
  • Replaces Toro OEM# 105-7781
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)
18" XHT Medium Lift Blade B1SC2801
18" XHT Medium Lift Blade
Each Price $11.95
Part# B1SC2801
Each Price (6 to 29): $10.95
Each Price (30 or More):
$10.45


18" XHT Medium Lift Blade thats used on several brands of 36" and 52" mower models. But it can also replace several other brands of mowers with the same deck sizes, such as:
Bad Boy, Bobcat, older Exmark, Ferris, Great Dane, Husqvarna, Snapper, Scag, John Deere, Toro, Wright Stander and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. XHT blades also offer greater impact toughness.
  • Replaces Bobcat OEM# WM132022
  • Replaces Exmark OEM# 1-303283, 1-303146
  • Replaces Bad Boy OEM# 038-3000-00, 038-3010-00
  • Replaces Scag OEM# 48108, 481707, 482462, 482878
  • Replaces Ferris OEM# 1521227, 5021227, 5021227S, 5101756
  • Replaces Great Dane OEM# GDU10231, D18037, 00450300, 03253800, 0450300
  • Replaces Husqvarna OEM# 539100341, 539101485
  • Replaces John Deere OEM# TCU37208
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)