Part# 96-322
Each Price (6 or More): $13.75

18" Oregon Gator G3 Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on Newer Toro ZMaster models, using 15/16" center hole and require a splined blade bushing. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

• Replaces Exmark OEM# 103-6397, 116-5175
• Replaces Toro OEM# 109-6873
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 15/16"
• Air Lift: 1"
• Requires (2) per 36" or (3) per 52"
• For our EMP proprietary blade use #29-718

Part# 396-322
Each Price (6 or More): $18.45

18" Oregon Gator G6 Heavy Duty Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

• Replaces Exmark OEM# 103-6397, 116-5175
• Replaces Toro OEM# 109-6873
• Length: 18"
• Blade Width: 3.00"
• Blade Thickness: .250"
• Center hole: 15/16"
• Air Lift: 1"
• Requires (2) per 36" cut or (3) per 52" cut
• One of the most popular mulching design in commercial mowing
• Can use our EMP version #29-718

Part# 792-030
Each Price (6 or More): $11.50

18" Oregon High Lift Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

• Replaces Exmark OEM# 103-6387, 103-6387-S, 103-6392-S, 116-5175-S
  
• Replaces Toro OEM# 109-6873-03, 140-1242
• Blade Width: 2.50"
• Blade Thickness: .203"TH
• Center hole: 15/16"
• Air Lift: 1"
• Require (2) for 36" or (3) for 52"
• Formerly# 92-030
• Can use EMP part# 26-718

Part# 26-718
Each Price (6 or More): $12.45
Each Price (30+): $11.95

18" EMP Medium Lift Heavy Duty Blade used on 36" & 52" Exmark Lazer Z, Pioneer, Radius, Turf Tracer models and more. Also used on new Toro models with a 15/16" center hole using a splined blade bolt bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Exmark OEM# 103-6402, 103-6402-S, 109-6873
  
• Replaces Toro OEM# 109-6873, 109-6873-03, 140-1242
• Blade Width: 2.50"
• Blade Thickness: .250" Hi-alloy Carbon Bar Steel
• Center hole: 15/16"
• Require (2) per 36" or (3) per 52"
• Made in the USA in ISO 9001 certified plant

Part# B1EM1883
Each Price (6 or More): $12.25

18" XHT OEM Style High Lift Blade for 36" or 52" mower decks on Exmark and new Toro models. Blade center holes require a splined blade bushing. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.

• Replaces Exmark OEM#103-6402, 103-6402-S
• Replaces Toro OEM# 140-1242, 109-6873-03
• Length: 18"
• Width: 2.50"
• Thickness: .203"
• Center hole: 15/16"
• Requires: (2) for 36" or (3) for 52"
• Can use EMP part# 92-030

Part# 29-718
Each Price (6 or More): $12.50
Each Price (30+): $12.00

18" EMP T4 Mulching Heavy Duty Blade used on 36" & 52" Exmark models Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro models that use the large center hole and require a spline blade bushing. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

• Replaces Exmark OEM# 116-5175, 103-6392, 103-6397
• Replaces Encore OEM# 543293
• Replaces Toro OEM# 109-6873-03, 140-1242
• Blade Width: 2.50"
• Blade Thickness: .250" Hi-alloy Carbon Bar Steel
• Center hole: 15/16"
• Require (2) per 36" or (3) per 52"
• Made in the USA in ISO 9001 certified plant

Part# 28-187
Each Price (6 or More): $11.75
Each Price (30+): $11.25

18" EMP Wavy Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Staris, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn.

• Replaces Exmark OEM# 103-6392, 103-6392-S
• Replaces Toro OEM# 109-6873-03, 140-1242
• Blade Width: 2.50"
• Blade Thickness: .204" Hi-alloy Carbon Bar Steel
• Center hole: 15/16"
• Require (2) for 36" or (3) for 52"
• Made in the USA in ISO 9001 certified plant
• Oregon version#

Part# 92-027
Each Price (6 or More): $12.95

18" Oregon Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Staris, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. The Oregon wavy mulching blade delivers a cleaner cut and quality results. Oregon replacement lawn mower blades are made to the exact OEM specification for optimum performance.

• Replaces Exmark OEM# 103-6392, 103-6392-S
• Replaces Toro OEM# 109-6873-03, 140-1242
• Blade Width: 2.50"
• Blade Thickness: .203"
• Center hole: 15/16"
• Require (2) for 36" or (3) for 52"
• For EMP version use part# 28-187

Part# B1EM93

Blade Bushing used on Exmark model blades with 15/16" Center Holes. Such models as Lazer Z, Radius, Vantage, Turf Tracer Series and more.

• Replaces Exmark OEM# 103-3037
• Height: 1.165"
  
• OD: 1.760"
• ID: 0.515"