You are here:Home > Blades > Blades by Deck Size > 60"
We found 62 results matching your criteria.
Sort By:
Page of 3
Oregon 20-1-/2" High Lift HD Blade 92-049 20-1-/2" High Lift HD Blade

Part# 92-049
20-1-/2" Oregon High Lift Heavy Duty Blade used on 60" Kubota models: RCK60P-21Z, RCK60P-227Z, RCK60P-28Z, RCK60P-327Z, RCK60P-331Z, RCK60P-400Z, RCK60P-725Z, RCK60P-781Z, RCK60P-F36 and RCK60P-F39. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

  • Replaces Kubota OEM# K5647-97530, K5647-34340
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 1-1/8"
  • Offset: 9/16"
  • Air Lift: 1-1/8"
  • Requires (3) per 60"
  • 92-049 supersedes to 792-049
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $18.95
Oregon 20-1/2" Gator G3 Blade 91-574 20-1/2" Gator G3 Mulching Blade

Part# 91-574
20-1/2" Oregon Gator G3 Mulching Blade used on Swisher T-60, T1360, T1360H, T14560, T18560, ZT2350, ZT2560, ZT2660, ZT2660B models. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly and delivers a clean cut for quality cut.

  • Replaces Swisher OEM# 20186, 3293, 9004, 9037
  • Width: 2.50"
  • Thick: .187
  • Center Hole: 3/8"
  • Outer Hole: 3/8"
  • Offset: 1/2"
  • Air Lift: 3/4"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.50
96-749 Oregon 20-1/2" Gator G3 Mulching Blade 20-1/2" Gator G3 Mulching Blade

Part# 96-749
20-1/2" Oregon Gator G3 Mulching Blade used on 60" Exmark and new Toro models. Blade center hole requires a splined blade bushing. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

  • Replaces Exmark OEM# 103-6398, 103-6398-S, 116-5174, 116-5174-S
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires: (3) for 60" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.95
Sale Price: $13.50
You save $2.45!
20-1/2" Oregon Gator G3 Mulching Blade 96-677 20-1/2" Gator G3 Mulching Blade

Part# 96-677
20-1/2" Oregon Gator G3 Mulching Blade used on 60" Cub Cadet Z-Force GT1500, LT1000, SLT1500 models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Cub Cadet OEM# 01004719, 01004719P, 01004719-0637
  • Width: 3.00"
  • Thick: .203"
  • Center Hole: 3/4
  • Offset: 1/2"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $23.75
20-1/2" Oregon Gator G3 Mulching Blade 96-319 20-1/2" Gator G3 Mulching Blade

Part# 96-319
20-1/2" Oregon Gator G3 Mulching Blade used on various 60" models. Such as Bad Boy, Big Dog, Dixie Chopper, Gravely, Hustler, Jacobsen, Toro, and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

  • Replaces Bad Boy OEM# 038-6003-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Big Dog OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Air Lift: 3/4"
  • Requires: (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $14.50
Sale Price: $12.50
You save $2.00!
392-025 Oregon 20-1/2" Gator G6 Mulching Blade 20-1/2" Gator G6 HD Mulching Blade

Part# 392-025
20-1/2" Oregon Gator G6 Heavy Duty Mulching Blade for 60" decks used on various Exmark and new Toro models only, using the large center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Exmark OEM# 103-6398, 103-6398-S, 116-5174, 116-5174-S
  • Length: 20-1/2"
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires (3) for 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $17.95
20-1/2" Oregon Gator G6 Mulching Blade  396-810 20-1/2" Gator G6 HD Mulching Blade

Part# 396-810
20-1/2" Oregon Gator G6 Mulching Blade used on over several different 60" Kubota models Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Up to twice the cutting length for increased cutting efficiency with each revolution.

  • Replaces Kubota OEM# K5645-34340
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 1-1/8"
  • Offset: 5/8"
  • Air Lift: 1"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $24.95
20-1/2" Oregon Gator G6 Blade 396-740 20-1/2" Gator G6 Mulching Blade

Part# 396-740
20-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on various 60" models, such as Bad Boy, Dixie Chopper, Gravely, Hustler, Toro, and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Excel OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Replaces Windsor OEM# 51-2805, 51-2800
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Requires: (3) per 60"
  • Try the Predator Blade #B1PD5009
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $26.25
396-734 Oregon 20-1/2" Gator G6 Blade 20-1/2" Gator G6 Mulching Blade

Part# 396-734
20-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 60" John Deere Front mount and Compact Tractor models: F1145, F1145, F910, F910-F935, F911, F912, F915, F930, F932, F935, 1050, 1070, 2305, 2320, 2520, 3 for 60", 3005, 3032E, 3036E, 3038E, 3120, 3320, 3520, 3720, 400, 400-455, 4005, 4100, 4120, 420, 425, 430, 4320, 445, 4520, 455, 4720, 650, 655, 670, 670-955. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

  • Replaces John Deere OEM# AM100538, M113878, M141785, M87622
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 7/8"
  • Requires: (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $26.05
20-1/2" Oregon Gator G6 Blade 396-612 20-1/2" Gator G6 Mulching Blade

Part# 396-612

20-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 60" Kubota RCK60B-22BX, RCK60B-24G, RCK60B-75B, RCK60B-23BX, RCK60D-26BX models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Kubota OEM# K5371-34330, K5371-34340, K5371-99020, K5371-99040
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 7/8"
  • Offset: 5/8"
  • Air Lift: 1"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $21.95
B1CC1421 XHT 20-1/2" High Lift Blade 20-1/2" High Lift Blade

Part# B1CC1421
20-1/2" XHT High Lift Blade used on 60" Cub Cadet Z-Force models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending & tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Cub Cadet OEM# 01004719, 01004719P, 01004719-0637
  • Width: 3.00"
  • Thick: .203"
  • Center Hole: 3/4
  • Requires (3) for 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $19.95
Oregon 20-1/2" High Lift Blade 91-188 20-1/2" High Lift Blade

Part# 91-188
20-1/2" Oregon High Lift Blade for 60" Exmark Explorer, Explorer II, Turf Ranger & Turf Tracer models. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

  • Replaces Exmark OEM# 1-603283, 1-603874, 103-3231, 103-3233
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 1/2"
  • Air Lift: 1"
  • Requires: (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $17.35
EMP 20-1/2" High Lift HD Blade 26-035 20-1/2" High Lift HD Blade

Part# 26-035
20-1/2" EMP High Lift Heavy Duty Blade used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Gravely, Hustler and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are the best choice for thinner blade grasses such as Bluegrass, Rye, and Zoysia. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-6060-00, 038-0012-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V
  • Replaces Exmark OEM# 103-2530, 103-2530-S, 116-5173, 116-5173-S
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 603992, 603995, 794685, 602771
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Require: (3) per 60"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.20
XHT 20-1/2" High Lift HD Blade B1DC1501 20-1/2" High Lift HD Blade

Part# B1DC1501
20-1/2" XHT High Lift HD Blade used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Gravely, Hustler and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.

  • Replaces Bad Boy OEM# 038-6060-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 603992, 603995, 608271, 607280
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Replaces Windsor OEM# 50-2814
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require: (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.10
Oregon 20-1/2" High Lift HD Blade 791-506 20-1/2" High Lift HD Blade

Part# 791-506
20-1/2" Oregon High Lift Heavy Duty Blade used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Hustler, Jacobsen and Toro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.

  • Replaces Bad Boy OEM# 038-6060-00, 038-0012-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V
  • Replaces Exmark OEM# 103-2530, 103-2530-S, 116-5173, 116-5173-S
  • Replaces Gravely OEM# 08781800
  • Replaces BigDog/Hustler OEM# 602771, 793794, 608271, 607280, 794685
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1-3/16"
  • Require: (3) per 60"
  • Formerly# 91-506
  • EMP proprietary HD blade #26-035
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.75
B1LE1880 Lazer Edge 20-1/2" Notched Blade 20-1/2" Lazer Edge Blade

Part# B1LE1880

20-1/2" Lazer Edge Self Sharpening Notched Blade used on 60" Exmark and newer Toro models. Blade has large center hole and require a spline blade bolt bushing. Utilizing EverSharp™ technology these hardened steel blades deliver superior performance and actually get sharper during use, resulting in minimal maintenance and maximum profitability for landscaping professionals. In abrasive conditions, a blade can get dull in as little as four hours. After putting the blade to work for 50 hours, the results were clear. The LaserEdge® blade edge was still sharp, and the untreated side was dulled and worn away.

  • Replaces Exmark OEM# 103-6403
  • Replaces Toro OEM# 140-1240
  • Width: 2.50"
  • Thickness: .197"
  • Air Lift: 1"
  • Center hole: 15/16"
  • Requires (3) for 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $45.95
20-1/2" XHT Low Lift HD Blade B1EM1840 20-1/2" Low Lift HD Blade

Part# B1EM1840
20-1/2" XHT Low Lift HD Blade used on various 60" decks. Such as Bad Boy, Bunton, Dixie Chopper, early Exmark, Gravely, Hustler, Big Dog, Jacobsen and Toro models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending.

  • Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-1580, 103-2510
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Excel OEM# 607564, 602248
  • Replaces Jacobsen OEM# 30227-60L
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (3) for 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.95
EMP 20-1/2" Medium Lift Blade 26-120 20-1/2" Medium Lift Blade

Part# 26-120
20-1/2" EMP Medium Lift Blade is used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Gravely, Hustler and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-6060-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler/Excel OEM# 600901, 602771, 794685
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Blade Width: 2.50"
  • Blade Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Require: (3) per 60"
  • Made in the USA in ISO 9001 certified plant
  • EMP proprietary HD blade #26-020
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.45
20-1/2" Oregon Medium Lift Blade 91-050 20-1/2" Medium LIft Blade

Part# 91-050
20-1/2" Oregon Medium Lift Heavy Duty Blade for 60" Swisher T-60 Finish Cut Trailmower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution

  • Replaces Swisher OEM# 20186, 3293, 9004, 9037
  • Blade Width: 2.25"
  • Blade Thickness: .187"
  • Center hole: 3/8"
  • Outer holes: 3/8"
  • Offset: 1/2"
  • Air Lift: 13/16"
  • Require: (3) for 60" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
EMP 20-1/2" Medium Lift HD Blade 26-020 20-1/2" Medium Lift HD Blade

Part# 26-020
20-1/2" EMP Medium Lift Heavy Duty Blade is used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Gravely, Hustler and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-6060-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800
  • Replaces BigDog/Hustler OEM# 602771, 793794, 608271, 607280, 794685
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Require: (3) for 60" deck
  • Made in the USA in ISO 9001 certified plant
  • EMP proprietary standard duty blade #26-120
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.20
EMP 20-1/2" Medium Lift HD Blade 26-721 20-1/2" Medium Lift HD Blade

Part# 26-721
20-1/2" EMP Medium Lift Heavy Duty Blade used on 60" Exmark and new style Toro models. Blade has large center hole and require a spline blade bolt bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Exmark OEM# 103-6383, 103-6403
  • Replaces Toro OEM# 140-1240
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 15/16"
  • Requires (3) per 60"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.45
Oregon 20-1/2" Medium Lift HD Blade 94-055 20-1/2" Medium Lift HD Blade

Part# 94-055
20-1/2" Oregon Medium Lift Heavy Duty Blade used on 60" models. Such as Bad Boy, BigDog, Bunton, Dixie Chopper, early Exmark, Gravely, Hustler, Big Dog, Jacobsen and Toro models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

  • Replaces Bad Boy OEM# 038-6060-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800
  • Replaces BigDog/Hustler OEM# 602771, 793794, 608271, 607280, 794685
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires: (3) per 60"
  • EMP proprietary HD blade #26-020
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.60
20-1/2" XHT Medium Lift HD Blade B1JD5008 20-1/2" Medium Lift HD Blade

Part# B1JD5008
20-1/2" XHT Medium Lift Heavy Duty Blade used on 60" John Deere Front mount and Compact tractor models: F1145, F1145, F910, F910-F935, F911, F912, F915, F930, F932, F935, 1050, 1070, 2305, 2320, 2520, 3005, 3032E, 3036E, 3038E, 3120, 3320, 3520, 3720, 400, 400-455, 4005, 4100, 4120, 420, 425, 430, 4320, 445, 4520, 455, 4720, 650, 655, 670, 670-955. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

  • Replaces John Deere OEM# AM100538, M113878, M141785, M87622
  • Center hole: 7/8 or 29/32"
  • Blade Width: 2.50"
  • Blade Thickness: .312"
  • Requires: (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $19.95
Predator 20-1/2" Blade B1PD5148 20-1/2" Predator HD Mulching Blade

Part# B1PD5148
20-1/2" Predator HD Mulching Blade used on 60" Kubota models: RCK60-24B, RCK60-27B, RCK60-30B, RCK60-F30, RCK60-21Z, RCK60-27B, RCK60-29B, RCK60-32, RCK60P-1000Z, RCK60P-227Z, RCK60P-327Z, RCK60P-331Z, RCK60P-400Z, RCK60P-725Z, RCK60P-781Z, RCK60R-331Z, RCK60R-F36, RCK60RP-1200Z, RCK60RP-1500Z. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Kubota OEM## 70000-00602, 70000-25001, 76539-34330, K5647-34340, K5647-97530, K5651-34340, K5668-97530, K5945-34360
  • Width: 2-1/2"
  • Thickness: .250"
  • Center hole: 1-1/8"
  • Offset: 1/2"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $19.50
Predator 20-1/2" Mulching Blade B1PD5009 20-1/2" Predator HD Mulching Blade

Part# B1PD5009
20-1/2" Predator Heavy Duty Mulching Blade used on 60" models. Such as Bad Boy, BigDog, Dixie Chopper, Gravely, Hustler, Toro, and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces BigDog, Hustler OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center Hole: 5/8"
  • Requires: (3) per 60"
  • Try our proprietary EMP T4 blade# 29-978
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
B1PD5143 Predator 20-1/2" HD Mulching Blade 20-1/2" Predator HD Mulching Blade

Part# B1PD5143
20-1/2" Predator Heavy Duty Mulching Blade used on 60" Kubota RCK60P-1200Z models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Kubota OEM# 77700-07936, K5955-34360, K5955-97530
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 1-5/16"
  • Offset: 5/8"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $24.95
Oregon 20-1/2 Standard Lift  Blade 792-031 20-1/2" Standard Lift Blade

Part# 792-031
20-1/2" Oregon Standard Lift Blade used on 60" Exmark Lazer Z, Radius and more. Also used on new 60" Toro Z Master, Grandstand models using 15/16"CH with a splined blade bushing. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

  • Replaces Exmark OEM# 103-6403, 103-6403-S
  • Replaces Toro OEM# 140-1240
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires (3) for 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.95
Sale Price: $11.50
You save $1.45!
Oregon 20-1/2" Standard Lift Blade 791-264 20-1/2" Standard Lift Blade

Part# 791-264
20-1/2" Oregon Standard Lift Blade used on various 60" models. Such as Bad Boy, Gravely, Hustler, Toro, and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-6060-00, 038-0012-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V
  • Replaces Exmark OEM# 103-2530, 103-2530-S, 116-5173, 116-5173-S
  • Replaces Gravely OEM# 08781800
  • Replaces BigDog/Hustler OEM# 600901, 602771, 794685
  • Replaces Jacobsen OEM# 30227-60N
  • Replaces Toro OEM# 105-7718-03, 115-9649-03, 133-2127
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Require: (3) for 60"
  • Formerly# 91-264
  • EMP proprietary standard duty blade #26-120
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.95
20-1/2" EMP T4 Mulching HD Blade 29-978 20-1/2" T4 HD Mulching Blade

Part# 29-978
20-1/2" EMP T4 Heavy Duty Mulching Blade used on 60" models. Such as Bad Boy, BigDog, Bunton, Dixie Chopper, early Exmark, Gravely, Hustler, Jacobsen and Toro models. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

  • Replaces Bad Boy OEM# 038-6003-00, 038-6050-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Excel OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires: (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.95
EMP 20-1/2" T4 Mulching Blade 29-720 20-1/2" T4 HD Mulching Blade

Part# 29-720
20-1/2" EMP T4 Heavy Duty Mulching Blade used on 60" Exmark and new style Toro models. Blade has large center hole and require a spline blade bolt bushing. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Exmark OEM# 103-6393, 103-6398, 116-5174, 116-5174
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 15/16"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.95