QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# 93-601 Each Price (6 or More): $19.9518" Oregon Gator G3 Mulching Blade used on 36"/52" Bobcat XM Series mowers. Also used on 52" Wright Mfg Stander X and Sport X models. The Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade.
Part# 193-010 Each Price (6 or More): $12.2518" Oregon High Lift Blade used on 36"/52" Bobcat XM Series mowers. Also used on 52" Wright Stander X, and Sport X models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 28-618 Each Price (6 or More): $11.95 Each Price (30+): $11.4518" EMP Wavy Mulching Blade used on various 36" & 52" models. Such as Bad Boy, Bobcat, Exmark, Ferris, Gravely, John Deere, Scag, Toro, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. Most customers prefer our brand of blades over all the aftermarket brands.
Part# 792-208 Each Price (6 or More): $12.5018-1/2" Oregon Low Lift Blade used on 54" Hustler Diesel Z, FasTrak, FasTrak SD, Raptor Series, Super Z, Trimstar, and X-ONE models. Also used on 54" BigDog Alpha MP, Alpha MPX, BlackJack, Hike, R Powerbar, R Diablo, Series C, Stout, Stout MP and T Series models. Oregon replacement lawn mower blade is made to the exact OEM specification for optimum performance.
Part# 26-985
Each Price (6 or More): $11.95 Each Price (30+): $11.45
Part# B1HS1008 Each Price (6 or More): $13.9018-1/2" XHT Medium Lift Blade used on 54" Hustler and Big Dog mower models. Also used on 54" Spartan mower models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard OEM lawnmower blades. Benefits of using the XHT blade are sharper and longer lasting cutting edges. Along with more resistance to bending. XHT blades offer greater impact toughness than standard style blades.
Part# B1CC1410 Each Price (6 or More): $17.5018-1/2" XHT Notched Lift Blade used on 54" Cub Cadet GT1500, LT1000, SLT1500 Lawn Tractors, Pro Midsize Walk-behind models and more. Also used on 54" Lesco ZTR and Walk-behind mowers. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Replaces Cub Cadet OEM# 759-3820, 742P3013A Width: 3.00"Thick: .203"Center Hole: 3/4(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1PD5145 Each Price (6 or More): $15.95 18-1/2" Predator HD Mulching Blade used on 54" Hustler Diesel Z, FasTrak, FasTrak SD, Raptor Series, Super Z, Trimstar, and X-ONE models. Also used on 54" BigDog Alpha MP, Alpha MPX, BlackJack, Hike, R Powerbar, R Diablo, Series C, Stout, Stout MP and T Series models. Can be used on Spartan models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
Part# 29-985
Each Price (6 or More): $13.95 Each Price (30+): $13.45
Part# 396-706
Each Price (6 or More): $19.35
Part# 791-380
Each Price (6 or More): $12.50
Part# B1KU1022 Each Price (6 or More): $15.5018-11/16" XHT High Lift Heavy Duty Blade used on 54" Kubota RC54-24B, RC54-71B, RC54-FZ21, RC54-G20, RCK54-18Z, RCK54-24B, RCK54P-400Z, RCK54P-724Z, RCK54P-781Z. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Replaces Kubota OEM# K5764-34340, K5613-34340, 70000-25004, 76529-34330Width: 2.50"Thickness: .250"THCenter Hole: 1-1/8"Requires (3) for 54"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 96-803Each Price (6 or More): $13.5518-3/4" Oregon Gator G3 Mulching Blade used on 54" Toro Titan ZX5400 (74848, 74914), Titan XS5450 (74877, 74889, 74898), Titan ZX5420 (74924), TimeCutter HD XS5450 (74865, 74867, 74888) models. Also used on 54" Exmark Quest QTE708GEM54100 models. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.
Part# B1TR3202 Each Price (6 or more): $11.2518-3/4" XHT High Lift Blade used on Toro 54" Titan ZX5450, ZX5400, MX5400 and 54" TimeCutter HD ZX5400, TimeCutter My Ride HD models. Other brands are .160" or .164" thick, but the XHT version is .187" thick. Making it one of thickest blades on the market. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.Replaces Toro/Exmark OEM# 115-9650-03, 115-2454-03Blade Width: 2.25"Blade Thickness: .187"Center hole: 5/8"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 94-060 Each Price (6 or more): $14.5018-3/4" Oregon High Lift Blade used on Toro 54" Titan ZX5450, ZX5400, MX5400 and 54" TimeCutter HD ZX5400, TimeCutter My Ride HD models. Also used on various 54" Exmark Quest models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.Replaces Toro/Exmark OEM# 115-9650-03, 115-2454-03Blade Width: 2.25"Blade Thickness: .164"Offset: 5/16"Center hole: 5/8"Air Lift: 1-1/8"(3) per 54"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1BB1200 Each Price (6 or more): $18.5018-3/4" XHT High Lift Heavy Duty Mower Blade used on 54" Bad Boy Outlaw, Outlaw XP, Stand-on, Rebel, Revolt models and more. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.Replaces Bad boy OEM# 038-0001-00Blade Width: 2.50"Blade Thickness: .250"Center hole: 5/8"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# B1MA2439Each Price (6 or More): $11.9518-5/8" XHT 2-n-1 OEM Style Blade used on Cub Cadet RZT-54 and various XT1-2 Lawn tractor models. Also used on Troybilt 54" Super Bronco and Mustang XP models. Also used 2020 and 2021 Craftsman 54" ZTR models. (These blades Do Not have the New "S" pattern center hole)Replaces Cub Cadet/MTD/Troybilt/Craftsman OEM# 742-05056, 942-05056, 942-05056AWidth: 2.50"Thickness: .164"Center Hole: 6 Point Star (May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-748 Each Price (6 or More): $17.5018-5/8" Oregon Gator G6 Heavy Duty Mulching Blade used on RCK54 deck models on various 54" Kubota mowers.Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 396-796
Each Price (6 or More): $20.95
Part# 91-436 Each Price (6 or More): $17.5018-5/8" Oregon High Lift Heavy Duty Blade used on 54" Kubota RC54-24B, RC54-71B, RC54-F19, RC54-FZ21, RC54-G20, RCK54-18Z, RCK54P-400Z, RCK54P-724Z, RCK54P-781Z models. Oregon has 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.Replaces Kubota OEM# K5764-34340, K5613-34340, 70000-25004, 76529-34330Width: 2.50"Thick: .250"Center Hole: 1-1/8"Offset: 1/2"Air Lift: 1-1/16"Requires (3) per 54"For XHT version use part# B1KU1022(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 396-812 Each Price (6 or more) $19.9518-5/8" Oregon Gator G6 Heavy Duty Mulching Blade used on 54" Kubota RCK54P-1000Z, RCK54P-227Z, RCK54P-321Z and RCK54GR models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 742P05086Genuine OEM 18.611" Cub Cadet 2-n-1 Blade used on models: XT1-GT54 KH FAB (14AQA3CM010) (2021), XT1-GT54 KH FAB (14AQA3TMA10) (2022-2023), XT1-ST54 KH FAB (13AQA2CM010) (2021), XT1-ST54 KH FAB (13AQA2TMA10) (2022-2023), ZT1-54 KH FAB (17AREACM010) (2021-2023) (ULTIMA ZT1), ZT1-54 KH FAB (17AREACM210) (2021-2022) (ULTIMA ZT1), ZT1-54 KH FAB (17RREACM010) (2021-2023) (ULTIMA ZT1), ZT1-54P KW FAB (17AIEACMA10) (2022-2023) (ULTIMA ZT1), ZT2-54 KW FAB (17AIEAC3010) (2021) (ULTIMA ZT2), ZT2-54 KW FAB (17AIEAC3A10) (2022-2023) (ULTIMA ZT2), ZT2-54 KW FAB (17RIEAC3010) (2021-2023) (ULTIMA ZT2), ZTS2-54 KH FAB (17ASGGY3A10) (2022-2023) (ULTIMA ZTS2). Also used on Troybilt models: 13A777BY066 Pony 36T (2020), 13AC77BY066 Pony 36 (2021), 13AC77BYA66 Pony 36B (2023), 13AC77SY000 (2022), 13AQA2BWA66 Super Bronco 54 XP (2022), 13AQA2BWA66 Super Bronco 54K XP (2023), 17ARFACW066 Mustang Z54 (2021), 17ARFACWA66 Mustang Z54 (2022-2023), 17ASFAC3066 Mustang 54 XP (2021), 17ASFAC3A66 Mustang 54 XP (2022). Also used on Craftsman models: CMGN231702 (17ASHAC3A93) (Z7600) (2023), CMGN231702 (17RSHAC3A93) (Z7600) (2023), CMXGNAM211704 (17ARFACW093) (Z5800) (2021-20223), CMXGNAM211704 (17RRFACW093) (Z5800) (2023), CMXGRAM201301 (13A777XY091) (T85) (2020), CMXGRAM201302 (13AC77XY093) (T100) (2020-2022), CMXGRAM201302 (13AC77XYA93) (T100) (2023), CMXGRAM201303 (13AC77XY293) (T100) (2020-2021), CMXGRAM211303 (13AQA2ZWA93) (T3200) (2023)..
Part# 396-769 Each Price (6 or More): $23.5019" Oregon Gator G6 Heavy Duty Mulching Blade used on 54" John Deere X Series Tractors and ZTrak models: X710, X730, X734, X738, X739, X750, X754, X758, X940, X948, X949, Z445, Z520A, Z535R, Z540R, Z625, Z655, Z710A, Z720E, Z730M, Z735M, Z740R, Z810A, Z820A, Z830A, Z840A, Z910A, Z915B, Z915E, Z920A, Z920M, Z920R, Z925A, Z925M, Z930M, Z930R, Z950R, and Z994R. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# B1JD1038 Each Price (6 or More): $15.9019" XHT High Lift Heavy Duty Blade used on 54" John Deere Compact Utility Tractors and ZTrak (7 Iron) models: 1023E, 1025R, 1026R, 2026R, 2038R, M655, 727A, 737, 757, Z710A, Z820A, Z830A, Z840A, Z910A, Z915B, Z915E, Z920A, Z920M, Z920R, Z925A, Z925M, Z930M, Z930R, Z950R, and Z994R. This 3" Wide XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.
Part# B1CC1413 Each Price (6 or More): $17.9519" XHT High Lift Blade used on 54" Cub Cadet M54 Tank and Z-Force Pro 54 mower models. Also used on 54" Lesco \Viper models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness. Replaces Cub Cadet OEM# 01005380, 02005018, 942-04416Width: 3.00"Thick: .203"Center Hole: 3/4"(May NOT fit all models- Check product description for exact OEM Part # match)
Part# 92-118 Each Price (6 or More): $20.0519" Oregon High Lift Heavy Duty Blade used on John Deere models: M655, 727A, 737, 757, Z710A, Z820A, Z830A, Z840A, Z910A, Z915B, Z915E, Z920A, Z920M, Z920R, Z925A, Z925M, Z930M, Z930R, Z950R, and Z994R. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results, and enhanced hardening to keep the blade sharper and more durable.
Part# B1JD1039 Each Price (6 or More): $13.9519" XHT High Lift Heavy Duty Blade used on 54" John Deere X Series Tractor & ZTrak models: X710, X730, X734, X738, X739, X750, X754, X758, X940, X948, X949, Z445, Z520A, Z535R, Z540R, Z625, Z655, Z710A, Z720E, Z730M, Z735M, Z740R, Z810A, Z820A, Z830A, Z840A, Z910A, Z915B, Z915E, Z920A, Z920M, Z920R, Z925A, Z925M, Z930M, Z930R, Z950R, and Z994R. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades.
Part# 91-138 Each Price (6 or More): $15.0519" Oregon High Lift Heavy Duty Blade used on 54" John Deere X Series Tractor & ZTrak models: X710, X730, X734, X738, X739, X750, X754, X758, X940, X948, X949, Z445, Z520A, Z535R, Z540R, Z625, Z655, Z710A, Z720E, Z730M, Z735M, Z740R, Z810A, Z820A, Z830A, Z840A, Z910A, Z915B, Z915E, Z920A, Z920M, Z920R, Z925A, Z925M, Z930M, Z930R, Z950R, and Z994R. It delivers a clean cut for quality results, and enhanced hardening to keep the blade sharper and more durable.
Part# B1HV2204Each Price (6 or More): $17.5019" XHT Medium Lift Heavy Duty Blade used on Husqvarna PZ54, Dixon DX254, Yazoo Kees ZPKW6029, and Redmax CZT54x models. Can be used on newer 54" Dixie Chopper Blackhawk & Blackhawk HP models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper & longer lasting cutting edge.