QUESTIONS?
904-731-0103
Maximize your savings
Located in Jacksonville, Florida
Blades from high quality steel
Part# B1EM1810 Each Price (6 or More): $14.9017-29/32" XHT Wavy Mulching Blade for older 36" and 52" Exmark mower models. But it can also replace several other brands of mowers with the same deck sizes, such as: Ariens/Gravely, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. XHT blades also offer greater impact toughness.
Part# 96-318 Each Price (6 or More): $17.9517-7/8" Oregon Gator G3 Mulching Blade used on 36"/52" Raptor Series, Sport, Super S, Super Z and X-ONE models. Also used on 36"/52" BigDog Alpha, Alpha MP, Diablo, Hike, Trooper and X Series models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities.
Part# 396-704 Each Price (6 or More): $18.8517-7/8" Oregon Gator G6 HD Mulching Blade used on 36" and 52" Hustler and Big Dog models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 92-044 Each Price (6 or More): $12.2517-7/8" Oregon High Lift Blade used on 36"/52" Raptor Series, Sport, Super S, Super Z and X-ONE models. Also used on 36"/52" BigDog Alpha, Alpha MP, Diablo, Hike, Trooper and X Series models. X-Tended Cutting Length optimizes the cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# B1HS1007 Each Price (6 or More): $13.2517-7/8" XHT Medium Lift Blade used on 36"/52" Raptor Series, Sport, Super S, Super Z and X-ONE models. Also used on 36"/52" BigDog Alpha, Alpha MP, Diablo, Hike, Trooper and X Series models. . XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending.
Part# 90-206 Each Price (6 or More): $14.9517-7/8" Oregon Medium Lift Blade used on 36"/52" Raptor Series, Sport, Super S, Super Z and X-ONE models. Also used on 36"/52" BigDog Alpha, Alpha MP, Diablo, Hike, Trooper and X Series models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.
Part# B1PD5008 Each Price (6 or More): $16.9018" Predator Series HD Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, early Exmark, Ferris, Gravely, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.
Part# 93-601 Each Price (6 or More): $19.9518" Oregon Gator G3 Mulching Blade used on 36"/52" Bobcat XM Series mowers. Also used on 52" Wright Mfg Stander X and Sport X models. The Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade.
Part# 96-329
Each Price (6 or More): $18.50
Part# 96-344 Each Price (6 or More): $16.9518" Oregon Gator G3 Mulching Blade used on various 36" and 52" models. Such as Bad Boy, Ferris, Great Dane, John Deere, Scag, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 96-322Each Price (6 or More): $13.7518" Oregon Gator G3 Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on Newer Toro ZMaster models, using 15/16" center hole and require a splined blade bushing. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.
Part# 595-085 Each Price (6 or More): $14.9518" Oregon Gator G5 Mulching Blade used on Husqvarna EX5221, EZ5224, EZ5226, EZ5424, MZT52, MZ5225 and Dixon Ultra 52, Kodiak SE5223, Ram 52ZT, Ram Ultra 52 models. Also used on Yazoo Kees ZEKH5224, ZEKH52240, ZEKW52210, ZELKH5225 and Redmax CZT52 models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 396-726 Each Price (6 or more): $22.9518" Oregon Gator G6 Heavy Duty Mulching Blade used on several 36" and 52" models. Such as Bad Boy, older Exmark, Ferris, Jacobsen, John Deere, Snapper, Scag, Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency.
Part# 396-729
Each Price (6 or More): $22.95
Part# 396-322Each Price (6 or More): $18.4518" Oregon Gator G6 Heavy Duty Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
Part# 91-623 Each Price (6 or more): $13.2518" Oregon Extended High Lift Blade used on 36"/52" Scag & Ferris models. Also used on various 36"/52" models, such as Bad Boy, Gravely, Husqvarna, Toro, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution
Part# 193-010 Each Price (6 or More): $12.2518" Oregon High Lift Blade used on 36"/52" Bobcat XM Series mowers. Also used on 52" Wright Stander X, and Sport X models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 792-030 Each Price (6 or More): $11.5018" Oregon High Lift Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.
Part# 26-003Each Price (6 to 29): $12.21Each Price (30 or more): $11.7118" EMP High Lift Heavy Duty Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. With EMP brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia.
Part# B1GH1906
Each Price (6 or More): $15.95
Part# 791-532
Each Price (6 or More): $13.95
Part# B1GH1900 Each Price (6 or More): $11.9518" XHT Low Lift Blade used on 52" Grasshopper Front Mount and M152 Mid Mount models. Also be used on Woods deck models. (Xtreme Hardness & Toughness) High Lift blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.
Part# 91-558 Each Price (6 or More): $13.1518" Oregon Low Lift HD Blade for 52" Grasshopper Front Mount and M152 Mid Mount deck models. Can also be used on Woods mower decks. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
Part# 91-622 Each Price (6 to 29): $11.99Each Price (30 or More): $11.4918" Oregon Medium Lift Blade used on several brands of 36" and 52" mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
Part# B1HV2203 Each Price (6 or more): $12.2518" XHT Medium Lift Blade used on various 52" models; Husqvarna EZ5221, EZ5224, MZ25, MZ52, MZT52, MZ5225, MZ5226 and Yazoo Kees ZELKH5225, ZELKH52240, and ZEKW52210. Also used on Redmax CZT52, Dixon Ultra 52 and Jonsered Z52XFmodels.
Part# 26-018 Each Price (6 to 29): $12.21 Each Price (30 or More): $11.71
Part# 26-718 Each Price (6 or More): $12.45 Each Price (30+): $11.9518" EMP Medium Lift Heavy Duty Blade used on 36" & 52" Exmark Lazer Z, Pioneer, Radius, Turf Tracer models and more. Also used on new Toro models with a 15/16" center hole using a splined blade bolt bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.
Part# B1EM1883 Each Price (6 or More): $12.2518" XHT OEM Style High Lift Blade for 36" or 52" mower decks on Exmark and new Toro models. Blade center holes require a splined blade bushing. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.
Part# 91-235 Each Price (6 or More): $20.9518" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.
Part# 91-335 Each Price (6 or More): $14.9518" Oregon Wavy Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. The Oregon wavy mulching blade delivers a cleaner cut and quality results.
