You are here:Home > Blades > Blades by Deck Size > 36"
We found 29 results matching your criteria.
Sort By:
Page of 1
17-29/32" XHT Wavy Mulching Blade B1EM1810 17 29/32" XHT Wavy Mulching Blade

Part# B1EM1810
17-29/32" XHT Wavy Mulching Blade for older 36" and 52" Exmark mower models. But it can also replace several other brands of mowers with the same deck sizes, such as:
Ariens/Gravely, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. XHT blades also offer greater impact toughness.

  • Replaces Exmark OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Length: 17-29/32"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.90
Oregon 17-7/8" Gator G3 Blade 96-318 17-7/8" Gator G3 Mulching Blade

Part# 96-318
17-7/8" Oregon Gator G3 Mulching Blade used on 36"/52" Raptor Series, Sport, Super S, Super Z and X-ONE models. Also used on 36"/52" BigDog Alpha, Alpha MP, Diablo, Hike, Trooper and X Series models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities.

  • Replaces Hustler/BigDog OEM# 782532, 794198, 785436
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires: (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $18.95
17-7/8" Oregon Gator G6 Blade 396-704 17-7/8" Gator G6 Mulching Blade

Part# 396-704
17-7/8" Oregon Gator G6 HD Mulching Blade used on 36" and 52" Hustler and Big Dog models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Hustler/Big Dog OEM# 794198, 782532, 785436
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires: (2) for 36" & (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $19.85
17-7/8" Oregon High Lift Blade 92-044 17-7/8" High Lift Blade

Part# 92-044
17-7/8" Oregon High Lift Blade used on 36"/52" Raptor Series, Sport, Super S, Super Z and X-ONE models. Also used on 36"/52" BigDog Alpha, Alpha MP, Diablo, Hike, Trooper and X Series models. X-Tended Cutting Length optimizes the cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces BigDog/Hustler OEM# 783753, 795526, 787721
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Air Lift: 1-1/16"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $13.25
18" Predator Mulching Blade B1PD5008 18" Predator HD Mulching Blade

Part# B1PD5008
18" Predator Series HD Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, early Exmark, Ferris, Gravely, Husqvarna, John Deere, Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.85
93-601 Oregon 18" Gator G3 Mulching Blade 18" Gator G3 Mulching Blade

Part# 93-601
18" Oregon Gator G3 Mulching Blade
used on 36"/52" Bobcat XM Series mowers. Also used on 52" Wright Mfg Stander X and Sport X models. The Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade.

  • Replaces Bobcat OEM# 112111-02
  • Replaces Encore OEM# 823004
  • Replaces Wright Mfg OEM# 71440009
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Offset: 1/2"
  • Requires: (2) for 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $19.95
Sale Price: $17.50
You save $2.45!
18" Oregon Gator G3 Mulching Blade 96-344 18" Gator G3 Mulching Blade

Part# 96-344
18" Oregon Gator G3 Mulching Blade used on various 36" and 52" models. Such as Bad Boy, Ferris, Great Dane, John Deere, Scag, Toro and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Air Lift: 3/4"
  • Requires: (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.95
96-322 Oregon 18" Gator G3 Mulching Blade 18" Gator G3 Mulching Blade

Part# 96-322
18" Oregon Gator G3 Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on Newer Toro ZMaster models, using 15/16" center hole and require a splined blade bushing. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Exmark OEM# 103-6397, 116-5175
  • Replaces Toro OEM# 109-6873
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.95
Sale Price: $12.95
You save $2.00!
18" Oregon Gator G6 Blade 396-726 18" Gator G6 Mulching Blade

Part# 396-726
18" Oregon Gator G6 Heavy Duty Mulching Blade used on several 36" and 52" models. Such as Bad Boy, older Exmark, Ferris, Jacobsen, John Deere, Snapper, Scag, Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440001
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $23.25
18" Oregon Gator G6 HD Mulching Blade 396-322 18" Gator G6 Mulching Blade

Part# 396-322
18" Oregon Gator G6 Heavy Duty Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Exmark OEM# 103-6397, 116-5175
  • Replaces Toro OEM# 109-6873
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $19.45
18" XHT OEM Style High Lift Blade B1EM1883 18" High Lift Blade

Part# B1EM1883
18" XHT High Lift Blade used on 36" & 52" Exmark and newer Toro models. Blade center holes require a splined blade bushing. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.

  • Replaces Exmark OEM#103-6402, 103-6402-S
  • Replaces Toro OEM# 140-1242, 109-6873-03
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 15/16"
  • Requires: (2) for 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.95
Oregon 18" High Lift Blade 91-623 18" High Lift Blade

Part# 91-623
18" Oregon Extended High Lift Blade used on 36"/52" Scag & Ferris models. Also used on various 36"/52" models, such as Bad Boy, Gravely, Husqvarna, Toro, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 5021227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 363055, 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 481707, 482462, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Width: 3.00"
  • Thickness: .203"
  • Air Lift: 1-1/2" (Extended High Lift)
  • Center Hole: 5/8"
  • Requires (2) for 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $14.25
792-030 Oregon 18" High Lift Blade 18" High Lift Blade

Part# 792-030
18" Oregon High Lift Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length optimizes the cutting efficiency with each revolution.

  • Replaces Exmark OEM# 103-6387, 103-6387-S, 103-6392-S, 116-5175-S
  • Replaces Toro OEM# 109-6873-03, 140-1242
  • Blade Width: 2.50"
  • Blade Thickness: .203"TH
  • Center hole: 15/16"
  • Air Lift: 1"
  • Require (2) for 36" or (3) for 52"
  • Formerly# 92-030
  • Can use EMP part# 26-718
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.50
Sale Price: $10.95
You save $1.55!
793-010 Oregon 18" High Lift Blade 18" High Lift Blade

Part# 793-010
18" Oregon High Lift Blade used on 36"/52" Bobcat XM Series mowers. Also used on 52" Wright Stander X, and Sport X models. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bobcat OEM# 112111-02
  • Replaces Wright Mfg OEM# 71440009
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Offset: 1/2"
  • Air Lift: 1-1/8"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.25
Sale Price: $11.50
You save $1.75!
18" EMP High Lift HD Blade 26-003 18" High Lift HD Blade

Part# 26-003
18" EMP High Lift Heavy Duty Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. With EMP brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia.

  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) for 36" (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.21
Oregon 18" High Lift HD Blade 91-184 18" High Lift HD Blade

Part# 91-184
18" Oregon High Lift HD Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3010-00, 038-1015-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S, 1-303146
  • Replaces Ferris OEM# 1521227, 1521227S, 5101756S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 363055, 390655
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Air Lift: 1"
  • Requires (2) for 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.75
XHT 18" High Lift HD Blade B1BC1202 18" High Lift HD Blade

Part# B1BC1202
18" XHT High Lift HD Blade used on various 36" & 52" models. Such as: Bad Boy, Bobcat, Exmark, Ferris, Great Dane, Husqvarna, Snapper, Scag, John Deere, Toro, Wright Mfg and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges, and more resistance to bending. XHT blades also offer greater impact toughness.

  • Replaces Bad Boy OEM# 038-5202-00, 038-3010-00
  • Replaces Bobcat OEM# 112111-02, 32022A
  • Replaces Exmark OEM# 1-303283, 103-6584-S, 1-633482
  • Replaces Ferris OEM# 1521227, 5021227, 5021227S, 5101756
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800, 0450300
  • Replaces Husqvarna OEM# 539100341, 539101485
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208
  • Replaces Scag OEM# 48108, 481707, 482462, 482878,481711
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751, 7075751, 7075751BZ, 7075751BZYP
  • Replaces Toro OEM# 105-7781
  • Replaces Wright Mfg OEM# 71440001
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (2) for 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.50
B1LE1883 Lazer Edge 18" High Lift Blades 18" Lazer Edge Blade

Part# B1LE1883

18" Lazer Edge Self Sharpening High Lift Blades used on 36" & 52" Exmark and newer Toro models. Blade center holes require a splined blade bushing. Utilizing EverSharp™ technology these hardened steel blades deliver superior performance and actually get sharper during use, resulting in minimal maintenance and maximum profitability for landscaping professionals. In abrasive conditions, a blade can get dull in as little as four hours. After putting the blade to work for 50 hours, the results were clear. The LaserEdge® blade edge was still sharp, and the untreated side was dulled and worn away.

  • Replaces Exmark OEM#103-6402, 103-6402-S
  • Replaces Toro OEM# 140-1242, 109-6873-03
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 15/16"
  • Requires: (2) for 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $40.45
18" Oregon Medium Lift Blade 91-622 18" Medium Lift Blade

Part# 91-622
18" Oregon Medium Lift Blade used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution

  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 1-633482, 103-2528, 1-306283, 103-6584
  • Replaces Ferris OEM# 5021227, 5021227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# TCU37208, TCU29188
  • Replaces Scag OEM# 48108, 482462, 481707
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Air Lift: 1"
  • Requires (2) For 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.99
26-018 EMP 18" Medium Lift HD Blade 18" Medium Lift HD Blade

Part# 26-018

18" EMP Medium Lift Heavy Duty Blade used on 36" & 52" models. Such as Bad Boy, Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Scag, Toro and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands
  • Replaces Bad Boy OEM# 038-5202-00, 038-3010-00, 038-3000-00
  • Replaces Bobcat/Ransome OEM# 112111-02, 32022, 32022A
  • Replaces Encore OEM# 363291
  • Replaces Exmark OEM# 103-6584-S
  • Replaces Ferris OEM# 1521227, 1521227S
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037, 00450300, 03253800
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces John Deere OEM# TCU37208
  • Replaces Scag OEM# 48108, 481711
  • Replaces Snapper OEM# 1-7037, 7-7344, 7075751
  • Replaces Toro OEM# 105-7781-03
  • Replaces Wright Mfg OEM# 71440001
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) for 36" (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.21
18" EMP Medium Lift HD Blade 26-718 18" Medium Lift HD Blade

Part# 26-718
18" EMP Medium Lift Heavy Duty Blade used on 36" & 52" Exmark Lazer Z, Pioneer, Radius, Turf Tracer models and more. Also used on new Toro models with a 15/16" center hole using a splined blade bolt bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Exmark OEM# 103-6402, 103-6402-S, 109-6873
  • Replaces Toro OEM# 109-6873, 109-6873-03, 140-1242
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 15/16"
  • Require (2) per 36" or (3) per 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.45
18" Oregon Low Lift HD Blade 91-235 18" Oregon Low Lift HD Blade

Part# 91-235
18" Oregon Low Lift HD Blade is used on several brands of 36" and 52" mower models.
Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Low Lift blades are best used in sparse, rough, sandy conditions to reduce wear on your deck and blades.

  • Replaces Bad Boy OEM# 038-3000-00
  • Replaces Encore OEM# 363291
  • Replaces Ferris OEM# 1521227, 5021227
  • Replaces Gravely/Great Dane OEM# GDU10231, D18037
  • Replaces Husqvarna OEM# 539100341
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125
  • Replaces John Deere OEM# AM104490, PT11136
  • Replaces Scag OEM# 48108, 481711, 482878
  • Replaces Snapper OEM# 5101756, 5101756SYP
  • Replaces Toro OEM# 133-2134
  • Replaces Wright Mfg OEM# 71440001
  • Length: 18"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) For 36" (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $21.95
791-335 Oregon 18" Mulching Blade 18" Oregon Mulching Blade

Part# 791-335
18" Oregon Wavy Mulching Blade used on 36" & 52" models. Such as Bad Boy, Bobcat, Ferris, Gravely, Husqvarna, Scag, Wright Mfg and more. The Oregon wavy mulching blade delivers a cleaner cut and quality results.

  • Replaces Bad Boy OEM# 038-5215-00
  • Replaces Bobcat/Ransome OEM# WM132022
  • Replaces Exmark/Toro OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Gravely OEM# 04887600
  • Replaces John Deere OEM# TCU35393
  • Replaces Scag OEM# 483655, 482462, 481707
  • Replaces Toro OEM# 103-2518
  • Replaces Wright Mfg OEM# 71490002
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 5/8"
  • Requires (2) for 36" or (3) for 52"
  • For EMP's version use #28-618
  • Superseded from #91-335
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.95
18" EMP T4 Heavy Duty Mulching Blade  29-945 18" T4 HD Mulching Blade

Part# 29-945
18" EMP T4 Heavy Duty Mulching Blade used on several brands of 36" and 52" mower models. Such as: Bad Boy, Bobcat, older Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440009, 71440001
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
  • Made in the USA in ISO 9001 certified plant
  • For our standard version use EMP# 29-045
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.25
EMP 18" T4 Mulching HD Blade 29-718 18" T4 HD Mulching Blade

Part# 29-718
18" EMP T4 Mulching Heavy Duty Blade used on 36" & 52" Exmark models Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro models that use the large center hole and require a spline blade bushing. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Exmark OEM# 116-5175, 103-6392, 103-6397
  • Replaces Encore OEM# 543293
  • Replaces Toro OEM# 109-6873-03, 140-1242
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 15/16"
  • Require (2) per 36" or (3) per 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.50
Sale Price: $12.95
You save $0.55!
18" EMP T4 Mulching Blade 29-045 18" T4 Mulching Blade

Part# 29-045
18" EMP T4 Mulching Blade used on various 36" & 52"models. Such as: Bad Boy, Bobcat, early Exmark, Ferris, Gravely/Great Dane, Husqvarna, John Deere, Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5203-00, 038-5215-00
  • Replaces Bobcat OEM# 32022, 32022A
  • Replaces Encore OEM# 363291,
  • Replaces Exmark OEM# 1-303146, 103-6584, 633482, 103-2508, 116-5176-S
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Great Dane OEM# D18037
  • Replaces Husqvarna OEM# 539100341, 539105712
  • Replaces Jacobsen OEM# 390655
  • Replaces Lesco OEM# 050125, 050140
  • Replaces John Deere OEM# TCU29869, TCU35393
  • Replaces Scag OEM# 481707, 481711, 48185, 482467, 482878
  • Replaces Snapper OEM# 7-6450, 7-7344, 7075751
  • Replaces Toro OEM# 105-7779-03
  • Replaces Wright Mfg OEM# 71440001, 71490002
  • Length: 18"
  • Width: 2.50"
  • Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center Hole: 5/8"
  • Requires (2) per 36" or (3) per 52"
  • Heavy Duty version use EMP# 29-945
  • Made in the USA ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.50
EMP 18" Wavy Mulching Blade 28-187 18" Wavy Mulching Blade

Part# 28-187
18" EMP Wavy Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Staris, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn.

  • Replaces Exmark OEM# 103-6392, 103-6392-S
  • Replaces Toro OEM# 109-6873-03, 140-1242
  • Blade Width: 2.50"
  • Blade Thickness: .204" Hi-alloy Carbon Bar Steel
  • Center hole: 15/16"
  • Require (2) for 36" or (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.75
Sale Price: $12.00
You save $0.75!
EMP 18" Wavy Mulching Blade 28-618 18" Wavy Mulching Blade

Part# 28-618
18" EMP Wavy Mulching Blade used on various 36" & 52" models. Such as Bad Boy, Bobcat, Exmark, Ferris, Gravely, John Deere, Scag, Toro, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's original "Double-hump" Wavy Mulching blade design performs best when used with mulch kits and closed chute mowers. When used with factory installed mulch kits our blade provides one outstanding cut lawn. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5215-00
  • Replaces Bobcat/Ransome OEM# WM132022
  • Replaces Exmark/Toro OEM# 103-2518, 103-6582, 1-303495, 1-633484, 103-6584
  • Replaces Ferris OEM# 5103304, 5103304S
  • Replaces Gravely OEM# 04887600
  • Replaces John Deere OEM# TCU35393
  • Replaces Scag OEM# 481707
  • Replaces Toro OEM# 103-2518
  • Replaces Wright Mfg OEM# 71490002
  • Width: 2.50"
  • Thickness: .203" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) for 36" or (3) for 52"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.95
Oregon 18" Mulching Blade 92-027 18" Wavy Mulching Blade

Part# 92-027
18" Oregon Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Staris, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. The Oregon wavy mulching blade delivers a cleaner cut and quality results. Oregon replacement lawn mower blades are made to the exact OEM specification for optimum performance.

  • Replaces Exmark OEM# 103-6392, 103-6392-S
  • Replaces Toro OEM# 109-6873-03, 140-1242
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Require (2) for 36" or (3) for 52"
  • For EMP version use part# 28-187
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.95