You are here:Home > Blades > Blades by Lift Type > HD Blades
We found 152 results matching your criteria.
Sort By:
Page of 6
30227-42 14-1/2" Oregon Gator G6 Blade: Dixie Chopper 396-714 14-1/2" Gator G6 Mulching Blade

Part# 396-714
14-1/2" Oregon Gator G6 Heavy Duty Mulching Blade for 42" Dixie Chopper models. Also can be used on Bad Boy 42" Outlaw models, along with Ariens/Gravely 42" decks. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Ariens/Gravely OEM# 02961600
  • Replaces Bad Boy OEM# 038-4222-00, 038-4226-00
  • Replaces Dixie Chopper OEM# 30227-42, 63227-H, 63227-N
  • Width: 3.00"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) for 42"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $22.40
5061827 15" XHT Medium Lift HD Blade: Ferris B1FE1044 15" Medium Lift HD Blade

Part# B1FE1044
15" XHT Medium Lift Heavy Duty Blade for 44" Ferris IS500Z and IS1500Z mower models. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard OEM lawnmower blades. Benefits of using the XHT blade are sharper and longer lasting cutting edges. Along with more resistance to bending, XHT blades offer greater impact.

  • Replaces Ferris OEM# 5061827, 5061827S, 5061827YP
  • Length: 15"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 44" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $18.95
5061827, 5061827S Ferris: 15" Predator Blade B1PD5144 15" Predator HD Mulching Blade

Part# B1PD5144
Each Price (6 or More): $17.95


15" Predator Series Heavy Duty Mulching Blade for 44" Ferris IS500Z & IS1500Z Series models. Also used on 44" Simplicity ZT4000 Series models. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Ferris OEM# 5061827, 5061827S, 5061827YP
  • Replaces Simplicity OEM# 5061827SSM
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 44"
(Check our Models & OEM Cross-Reference #'s section to find your model#)

Our Price: $18.95
16 1/2" EMP Medium Lift HD Blade 26-061 16 1/2" Medium Lift HD Blade

Part# 26-061
16-1/2" EMP Medium Lift Heavy Duty Blade thats used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, Scag, Toro, Wright Mfg and more.. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP's Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Lesco, Scag, Toro, Wright Mfg, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler OEM# 601014, 601123, 795757
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.95
16.5" Oregon Gator G6 Mulching Blade 391-614 16-1/2" Gator G6 HD Mulching Blade

Part# 391-614
Each Price (6 or more): $22.95


16-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Simplicity and Snapper models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Simplicity/Snapper OEM# 1759055YP
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 3/4"
  • Air Lift: 1"
  • Requires: (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $23.95
16.5" Oregon Gator G6 HD Mulching Blade 396-735 16-1/2" Gator G6 Mulching Blade

Part# 396-735
16-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on several brands of 48" mowers, from Bad Boy, Hustler, Scag, Toro, Wright Mfg and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires: (2) per 32" or (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $22.25
16-1/2" EMP High Lift Heavy Duty Blade 26-004 16-1/2" High Lift HD Blade

Part# 26-004
16-1/2" EMP High Lift Heavy Duty Blade used on several brands of 32" & 48" mower models. Such as Bad Boy, Hustler, John Deere, Scag, Wright Mfg and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP High lift blades are ideal for cutting thinner blade grasses such as Bluegrass, Rye and Zoysia. This heavy-duty blade is an OEM and aftermarket replacement blade for all the top brands, including Exmark/Toro, Scag, Wright Mfg, Ferris, Oregon and more. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205, PL4855
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler OEM# 601014, 601123, 795757, 606252
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Snapper/Kees OEM# 1-7043, 7075771, 7075771BZ, 7075771BZYP
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Length: 16-1/2"
  • Width: 2.50"
  • Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 5/8"
  • Requires (2) for 32" deck or (3) for 48" deck
  • Made in the USA in ISO 9001 plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.95
Sale Price: $12.50
You save $1.45!
16-1/2" Oregon High Lift HD Blade 92-036 16-1/2" High Lift HD Blade

Part# 92-036
16-1/2" Oregon High Lift Heavy Duty Blade used on various 48" models. Such as Bad Boy, BigDog, Hustler, John Deere, Scag, Wright Mfg and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Bad Boy OEM# 038-5350-00
  • Replaces Bunton OEM# PL4205, PL4855
  • Replaces Great Dane OEM# D18086, D18086A
  • Replaces Hustler/BigDog OEM# 601014, 601123, 795757, 606252
  • Replaces John Deere OEM# TCU34166
  • Replaces Lesco OEM# 050111
  • Replaces Scag OEM# A48110, 481706, 482461, 482877
  • Replaces Snapper/Kees OEM# 1-7043, 7075771, 7075771BZ, 7075771BZYP
  • Replaces Toro OEM# 107-3192-03, 133-2137
  • Replaces Wright Mfg OEM# 71440002
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (2) per 32" or (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $16.95
16-1/2" Predator HD Mulching Blade B1PD5006 16-1/2" Predator HD Mulching Blade

Part# B1PD5006
16-1/2" Predator Series HD Mulching Blade for
several different brands of 32" and 48" mowers, from Bad Boy, Gravely/Great Dane, Scag, Toro, Wright Mfg and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Length: 16-1/2"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Requires: (2) for 32" or (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.25
16-1/2" EMP T4 HD Mulching Blade 29-912 16-1/2" T4 HD Mulching Blade

Part# 29-912
16-1/2" EMP T4 Heavy Duty Mulching Blade for several different brands for several different brands of 32" and 48" mowers, from Bad Boy, Gravely/Great Dane, Scag, Toro, Wright Mfg and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

  • Replaces Bad Boy OEM# 038-5000-00, 038-5350-00
  • Replaces Encore OEM# 483049
  • Replaces Gravely/Great Dane OEM# GDU10230, D18086, 00878100
  • Replaces Hustler OEM# 796623, 795757
  • Replaces John Deere OEM# AM104489, TCU29299
  • Replaces Lesco OEM# 021871
  • Replaces Scag OEM# 482991, 481710, 48184
  • Replaces Snapper OEM# 7017043, 7017043YP, 7075771, 7075771BMA
  • Replaces Spartan OEM# 438-0004-00
  • Replaces Toro OEM# 107-3195-03, 107-3196-03
  • Replaces Wright Mfg OEM# 71440002, 71490001
  • Length: 16-1/2"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Requires: (2) for 32" or (3) per 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.50
16-1/4"  Predator HD Mulching Blade B1PD5005 16-1/4" Predator HD Mulching Blade

Part# B1PD5005
16-1/4" Predator Series HD Mulching Blade for several brands of 32" and 48" Mower decks. Used on Ariens/Gravely, Bad Boy, Bobcat, older Exmark, Ferris, Husqvarna, Snapper, older Toro and more. Predator blades provide the flat blade design preferred by most commercial mowers with an extended cutting length for increased cutting efficiency.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4820-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 48" deck or (2) per 32" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
16-1/4" Oregon Gator G6 Blade 396-716 16-1/4" Gator G6 Mulching Blade

Part# 396-716
16-1/4" Oregon Gator G6 HD Mulching Blade used on several brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna Turf, Snapper, older Toro and more. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Air Lift: 1"
  • Requires (3) per 48"
  • if out of stock try our EMP# 29-905
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $22.25
16-1/4" Oregon Gator G6 HD Mulching Blade 396-321 16-1/4" Gator G6 Mulching Blade

Part# 396-321
16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
  • Replaces Toro OEM# 109-6873
  • Length: 16-1/4"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 15/16"
  • Requires (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.95
392-205 Oregon 16-1/4" Gator G6 Blade 16-1/4" Gator G6 Mulching Blade

Part# 392-205
16-1/4" Oregon Gator G6 Heavy Duty Mulching Blade used on 46" Exmark Triton deck models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. It’s not a replacement blade, It’s an upgrade.

  • Replaces Exmark OEM# 103-8251, 103-8296, 109-6460, 116-5496-S
  • Center hole: 15/16"
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Offset: 3/8"
  • Requires (3) per 46" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $23.15
16-1/4" Oregon High Lift Blade 792-029 16-1/4" High Lift Blade

Part# 792-029
16-1/4" Oregon High Lift Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.

  • Replaces Exmark OEM# 103-6401, 103-6401-S
  • Replaces Toro OEM# 109-6872
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Require (3) for 48"
  • Supersedes to #792-029
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $11.95
Sale Price: $10.95
You save $1.00!
XHT 16-1/4" High Lift HD Blade B1BC1201 16-1/4" High Lift HD Blade

Part# B1BC1201
16-1/4" XHT High Lift HD Blade
for several different brands of 48" mowers, from Ariens, Gravely, Bad Boy, older Exmark, Ferris Husqvarna, Snapper, older Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Bad Boy OEM# 038-4820-00, 038-4826-00
  • Replaces Bobcat/Ransome OEM# 112111-01, 32061, 32061A
  • Replaces Exmark OEM# 1-323515, 1-403026, 103-6583-S
  • Replaces Ferris OEM# 5020843
  • Replaces Snapper/Kees OEM# 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
  • Replaces Toro OEM# 103-2527
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Outer hole: 1/4
  • Requires (3) per 48" deck & (2) for 32" deck on Bad boy, Bobcat/Ransome, Ferris, Ariens/Gravely, Husqvarna and Jacobsen
  • Best choice for broad leaf grasses such as St Augustine and Fescue
(May NOT fit all models- Check product description for exact OEM Part # match)


Each Price $14.50
16-1/4" EMP Medium Lift HD Blade 26-716 16-1/4" Medium Lift HD Blade

Part# 26-716
16-1/4" EMP Medium Lift Heavy Duty Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. With EMP's brand of blades you’ll find our blades made with 100% Hi-carbon alloy steel specifically engineered for mower blade applications. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP Medium lift blades are ideal for cutting broad leaf grasses such as St. Augustine and Fescue. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Exmark OEM# 103-6401, 103-6401-S
  • Replaces Toro OEM# 109-6872
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Center hole: 15/16"
  • Require (3) for 48"
  • Made in the USA in ISO 9001 certified plant
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.65
16-1/4" Oregon Medium Lift HD Blade 91-183 16-1/4" Medium Lift HD Blade

Part# 91-183
16-1/4" Oregon Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. Oregon's 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results

  • Replaces Bad Boy OEM# 038-4820-00, 038-4826-00
  • Replaces Bobcat/Ransome OEM# 112111-01, 32061, 32061A
  • Replaces Exmark OEM# 1-323515, 1-403059, 103-2527, 103-6583-S
  • Replaces Ferris OEM# 5020843
  • Replaces Gravely OEM# 00273000, 04919100, 04920600
  • Replaces Husqvarna OEM# 539101366, 539106040, 539106041, 539109756
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper/Kees OEM# 1-7036, 7-6675, 7017036, 7017036, 7017036BMYP, 7017036YP
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Air Lift: 1"
  • Requires (2) for 32" & (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.50
Sale Price: $12.50
You save $2.00!
16-1/4" XHT Notched Medium Lift HD Blade B1FE1048 16-1/4" Notched Medium Lift HD Blade

Part# B1FE1048
16-1/4" XHT Notched Medium Lift Heavy Duty Blade used on various brands of 32" & 48" mowers: Bad Boy, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, Toro and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket versus OEM. XHT blades also offer greater impact toughness.

  • Replaces Bad Boy OEM# 038-3000-00, 038-4820-00
  • Replaces Bobcat OEM# WMTA3206, WMTA32061
  • Replaces Ferris OEM# 5101986, 5101986BM, 5101986BMYP
  • Replaces Gravely OEM# 04919100
  • Replaces Husqvarna OEM# 539100340
  • Replaces Jacobsen OEM# 390666
  • Replaces Snapper OEM# 5101986BMYP
  • Replaces Toro OEM# 103-2517, 103-2527
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 5/8"
  • Require (2) for 32" or (3) for 48" deck
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.90
16-1/4" EMP T4 Mulcher HD Blade 29-905 16-1/4" T4 HD Mulching Blade

Part# 29-905
16-1/4" EMP T4 Heavy Duty Mulching Blade for several brands of 32" & 48" mowers, from Ariens, Gravely, older Exmark, Ferris, Husqvarna Turf, Snapper, older Toro and more. EMP's brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are the most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands. Extended wear in sandy or extreme mowing conditions.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-4827-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-2527, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 21537, 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Length: 16-1/4"
  • Center hole: 5/8"
  • Blade Width: 2.50"
  • Blade Thickness: .250" Hi-alloy Carbon Bar Steel
  • Requires (2) for 32" deck or (3) per 48" deck
  • For our Standard version use EMP# 29-005
  • Made in the USA in ISO 9001 certified plant
  • One of the most popular mulching design in commercial mowing
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.50
Sale Price: $12.00
You save $1.50!
16-1/4" EMP T4 HD Mulching Blade 29-716 16-1/4" T4 HD Mulching Blade

Part# 29-716
16-1/4" EMP T4 Heavy Duty Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. EMP brand of blades are made with full austemper heat-treating for maximum wear, hardness, and impact resistance. They are computer balanced to ensure minimum vibration and maximum spindle life. Every blade is individually computer straightened for a next to perfect cut. EMP T4 Mulching HD blades are them most popular design in commercial mowing. Our 4 Tooth design forces clippings back into the air flow for superior cutting without requiring a mulch kit. Extremely great for fall and spring clean ups, where leaves need shredding amongst other debris. Most customers prefer our brand of blades over all the aftermarket brands.

  • Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
  • Replaces Toro OEM# 109-6873
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Require (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $13.65
Oregon 16-5/8" High Lift Blade 92-124 16-5/8" High Lift HD Blade

Part# 92-124
16-5/8" Oregon High Lift HD Blade used on 48" Kubota RCK48, RCK48GR, RCK48P, RCK48-LT23, RCK48P-222Z models. Made to exact OEM specifications. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

  • Replaces Kubota OEM# K5184-97532, K5576-34350, K5576-97530
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 7/8"
  • Offset: 9/16"
  • Air Lift: 1-1/8
  • Requires (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.75
16-5/8" XHT High Lift HD Blade B1KU1044 16-5/8" High Lift HD Blade

Part# B1KU1044
Each Price (6 or more): $14.95


16-5/8" XHT High Lift Heavy Duty Blade used on 48" Kubota models: RCK48P-400Z, RCK48P-723Z and RCK48P-751Z. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Kubota OEM# K5583-34340
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 1-1/8"
  • Requires: (3) per 48"
(May NOT fit all models- Check product description for exact

Our Price: $15.95
16-5/8" XHT High Lift HD Blade B1KU1028 16-5/8" High Lift HD Blade

Part# B1KU1028
Each Price (6 or More): $13.25


16-5/8" XHT High Lift Heavy Duty Blade used on 48" Kubota models: RCK48-20ZG, RCK48GR, RCK48P-90T, RCK48P-124Z, RCK48P18BX, RCK48S-222Z. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Kubota OEM# K5575-34330
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 11/16"
  • Offset: 1/2"
  • Require (3) per 48"

Our Price: $14.25
B1KU1026 16-5/8" XHT High Lift Blade 16-5/8" High Lift HD Blade

Part# B1KU1026
Each Price (6 or more): $14.50

16-5/8" XHT High Lift HD Blade used on 48" Kubota RCK48, RCK48GR, RCK48P, RCK48-LT23, RCK48P-222Z models. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness.

  • Replaces Kubota OEM# K5184-97532, K5576-34350, K5576-97530
  • Width: 2.50"
  • Thick: .250"
  • Center Hole: 7/8"
  • Offset: 9/16"
  • Air Lift: 1-1/8
  • Requires (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.50
16-9/16" Oregon Gator G6 HD Mulching Blade 392-047 16-9/16" Gator G6 HD Mulching Blade

Part# 392-047
16-9/16" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Kubota GCK48-90T, GCK54-100Z, RCK48-20ZG, RCK48GR, RCK48P-124Z, RCK48S-222Z and RCK48P18BX models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length optimizes the cutting efficiency.

  • Replaces Kubota OEM# K5575-34330, K5575-97530, K5579-92330, K5579-92332
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 11/16"
  • Offset: 1/2"
  • Air Lift: 1"
  • Requires (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $21.25
Oregon 16-9/16" High Lift Blade 92-047 16-9/16" High Lift HD Blade

Part# 92-047
16-9/16 Oregon High Lift Heavy Duty Blade used on 48" Kubota models: RCK48-15BX, RCK48LT17, RCK48LTB, RCK48-20ZG, RCK48GR, RCK48P-124Z, RCK48P18BX, RCK48S-222Z. Made to exact OEM specifications. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results.

  • Replaces Kubota OEM# K5182-71840, K5575-34330, K5575-97530
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 11/16"
  • Offset: 1/2"
  • Air Lift: 1-1/8"
  • Require (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.25
17" Oregon High Lift HD Blade 91-505 17" High Lift HD Blade

Part# 91-505
17" Oregon High Lift Heavy Duty Blade used on 34" and 50" Dixie Chopper, Gravely, Husqvarna and Toro. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution

  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50H
  • Replaces Dixon OEM# 539129743
  • Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
  • Replaces Husqvarna OEM# 581055501
  • Replaces Toro OEM# 11-3579, 11-3579-09
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Air Lift: 1-1/8"
  • Requires (2) for 32" and (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $16.95
Sale Price: $14.25
You save $2.70!
17" Oregon Gator G6 Blade 396-723 17" Gator G6 Mulching Blade

Part# 396-723
17" Oregon Gator G6 Heavy Duty Mulching Blade
used on various 34" & 50" decks, such as Dixie Chopper, Dixon, Gravely, and Husqvarna. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Dixie Chopper OEM# 30227-50, 30227-50V, 30227-50X
  • Replaces Dixon OEM# 539129743
  • Replaces Gravely OEM# 08779200, 08779251, 08866800, 08866851
  • Replaces Husqvarna OEM# 581055501
  • Replaces Toro OEM# 11-3579, 11-3579-09
  • Width: 3.00"
  • Thickness: .250"
  • Center Hole: 5/8"
  • Requires (2) for 34" or (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $25.75
942-04417 Oregon 17" Gator G6 Mulching Blade: Cub Cadet 392-139 17" Gator G6 Mulching Blade

Part# 392-139
17" Oregon Gator G6 Heavy Duty Mulching Blade used on 48" Cub Cadet models: Enforcer 48, PRO HW 300 348 (2018-2022), PRO X 600 KW 648 (2020-2022), PRO Z 100 EFI 148-L (2016-2019), PRO Z 100 EFI 148-S (2016-2022), PRO Z 500 KW 548-L (2018), RECON 48, Tank L48KH LZ48, SZ48, Z-Force L48 (2013-2018), Z-Force LX48 KW (2016-2019), Z-Force LZ48 (2014-2015), Z-Force S 48 (2013), Z-Force S48 (2018-2019), Z-Force SX48 KW (2016-2022), Z-Force SZ48 KH FAB (2016-2021). Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Cub Cadet OEM# 01005336, 02005017, 742-04417, 942-04417, 942-04417-X
  • Width: 3.00"
  • Thick: .250"
  • Center Hole: 3/4
  • Offset: 7/16"
  • Air Lift: 1"
  • Requires: (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $24.95