You are here:Home > Blades > Blades by Lift Type > 3 in 1
We found 44 results matching your criteria.
Sort By:
Page of 2
95-615 Oregon 22" Gator G3 Mulching Blade 22" Gator G3 Mulching Blade

Part# 95-615
21-15/16" Oregon Gator G3 Mulching Blade used on 22" Husqvarna Self propelled models: HU550F, HU550FH, HU675FE, HU700F, HU700L, HU725AWD, and HU800AWD. Also used on AYP Products such as Craftsman and Poulan models.

  • Replaces Husqvarna OEM# 532437601, 580244001, 580244002
  • Blade Width: 2.25"
  • Blade Thickness: .134"
  • Offset: 9/16"
  • Center hole: 5 Point Star
  • Air Lift: 3/4"
  • Requires: (1) for 22"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $11.95
Sale Price: $9.95
You save $2.00!
XHT 21" Notched Mulching Blade B1MA2417 21" Notched Mulching Blade

Part# B1MA2417
21" XHT Notched Mulching Blade used on 21" Troybilt Walk-behind and Self propelled models: TB100, TB105, TB105B, TB110, TB115, TB120, TB120B, TB125, TB130, TB130XP, TB140, TB160, TB160XP, TB170XP, TB200, TB210B, TB220BXP, TB270ES, TB270XP, TB280ES, TB290ES, TB300XP, TB310BXP, TB320, TB340XP, TB365XP, TB370XP, TB380ES, TB400XP, TB430XP, TB450XP, and TB490XP and more. Also used on 21" MTD decks 1995 an older, such as Cub Cadet, Craftsman and more. XHT (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

  • Replaces Troybilt/MTD/Craftsman/Cub Cadet/Yard Machine OEM# 742-0741, 742-0741A, 942-0641, 942-0741, 942-0741A
  • Blade Width: 2.25"
  • Blade Thickness: .134"
  • Center hole: BOW-TIE
  • Requires (1) for 21" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $10.50
XHT 21" Mulching Blade B1EP1023 21" XHT Mulching Blade

Part# B1EP1023
21" XHT Mulching Blade used on most 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Poulan Pro, Jonsered, McCulloch, Redmax, and Weedeater.

  • Replaces AYP/Husqvarna OEM# 532139775, 594893101, 532138971, 531005085
  • Blade Width: 2.25"
  • Blade Thickness: .187"
  • Center hole: 5 Point Star
  • Requires: (2) for 42"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $11.95
20-1/2" Oregon Gator G3 Mulching Blade 96-319 20-1/2" Gator G3 Mulching Blade

Part# 96-319
20-1/2" Oregon Gator G3 Mulching Blade used on various 60" models. Such as Bad Boy, Big Dog, Dixie Chopper, Gravely, Hustler, Jacobsen, Toro, and more. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

  • Replaces Bad Boy OEM# 038-6003-00
  • Replaces Bunton OEM# PL7441
  • Replaces Dixie Chopper OEM# 30227-60, 30227-60V, 30227-60X
  • Replaces Exmark OEM# 103-2530, 103-2530-S
  • Replaces Gravely OEM# 08781800, 08979600, 08979651
  • Replaces Hustler/Big Dog OEM# 794230, 794214
  • Replaces Jacobsen OEM# 30227-60X
  • Replaces John Deere OEM# AM100538, M141785
  • Replaces Toro OEM# 105-8777, 105-8777-03, 115-9649-03, 133-2127, 133-2157
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 5/8"
  • Air Lift: 3/4"
  • Requires: (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $14.50
Sale Price: $12.50
You save $2.00!
96-322 Oregon 18" Gator G3 Mulching Blade 18" Gator G3 Mulching Blade

Part# 96-322
18" Oregon Gator G3 Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on Newer Toro ZMaster models, using 15/16" center hole and require a splined blade bushing. Up to twice the cutting length for increased cutting efficiency with each revolution. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Exmark OEM# 103-6397, 116-5175
  • Replaces Toro OEM# 109-6873
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $14.95
Sale Price: $12.95
You save $2.00!
96-401 Oregon 23-1/4" Gator G3 Mulching Blade 23-1/4" Gator G3 Mulching Blade

Part# 96-401

Each Price (6 or More): $11.95

23-1/4" Oregon Gator G3 Mulching Blade used on several 46" MTD models prior to 2014. Such as Cub Cadet, Troybilt, Craftsman, Remington, White Outdoor Products, Yard Machine, and Yardman mowers. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results. It’s not a replacement, it’s an upgrade.
  • Replaces MTD Products OEM# 490-110-C131, 742-04244, 742-04244A, 742-04290, 742-04290-X, 942-04244, 942-04244-X, 942-04244A, 942-04290
  • Width: 3.00"
  • Thick: .149"
  • Center Hole: 6 Point Star
  • Offset: 1/4"
  • Air Lift: 1"
  • Requires (2) for 46"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $12.95
16-1/4" XHT Wavy Mulching Blade B1EM1815 16-1/4" Wavy Mulching Blade

Part# B1EM1815
16-1/4" XHT Wavy Mulching Blade used on various 48" models. Such as Ariens/Gravely, Bad Boy, early Exmark, Ferris Husqvarna Turf, Snapper and more. (Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the XHT blade are sharper and longer lasting cutting edges.

  • Replaces Ariens/Gravely OEM# 00273000
  • Replaces Bad Boy OEM# 038-5000-00
  • Replaces Bobcat/Ransome OEM# WMTA32061
  • Replaces Ferris OEM# 5020843
  • Replaces Exmark OEM# 103-2517, 103-6336, 103-6738, 109-6391
  • Replaces Giant Vac OEM# 3021537, 3021584
  • Replaces Husqvarna OEM# 539101366
  • Replaces Jacobesen OEM# 390666
  • Replaces Snapper OEM# 5103303S
  • Replaces Toro OEM# 103-2507, 103-2517, 1-403149
  • Blade Width: .250"
  • Blade Thickness: .187"
  • Center hole: 5/8"
  • Requires: (2) per 32" or (3) per 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $12.95
96-749 Oregon 20-1/2" Gator G3 Mulching Blade 20-1/2" Gator G3 Mulching Blade

Part# 96-749
20-1/2" Oregon Gator G3 Mulching Blade used on 60" Exmark and new Toro models. Blade center hole requires a splined blade bushing. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time and reducing hassles.

  • Replaces Exmark OEM# 103-6398, 103-6398-S, 116-5174, 116-5174-S
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires: (3) for 60" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.95
Sale Price: $13.50
You save $2.45!
Oregon 21" High Lift HD Blade 91-534 21" High Lift HD Blade

Part# 91-534
21" Oregon High Lift Heavy Duty Mulching Blade used on 61" Grasshopper Front Mount and M161 Mid Mount models. Also used on Bush Hog ATH600, ATH720, FTH600, FTH720 models. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.

  • Replaces Grasshopper OEM# 320244
  • Replaces Bush Hog OEM# 88668
  • Replaces Woods OEM# 70134, 70134KT
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 1/2"
  • Offset: 5/16"
  • Air Lift: 1-3/16
  • Requires (3) for 61"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.25
Oregon 20-1/2" Gator G3 Blade 91-574 20-1/2" Gator G3 Mulching Blade

Part# 91-574
20-1/2" Oregon Gator G3 Mulching Blade used on Swisher T-60, T1360, T1360H, T14560, T18560, ZT2350, ZT2560, ZT2660, ZT2660B models. Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly and delivers a clean cut for quality cut.

  • Replaces Swisher OEM# 20186, 3293, 9004, 9037
  • Width: 2.50"
  • Thick: .187
  • Center Hole: 3/8"
  • Outer Hole: 3/8"
  • Offset: 1/2"
  • Air Lift: 3/4"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.50
16-1/4" Oregon Gator G3 Mulching Blade 96-321 16-1/4" Gator G3 Mulching Blade

Part# 96-321
16-1/4" Oregon Gator G3 Mulching Blade used on 48" Exmark Metro, Turf Tracer, Vantage, Pioneer and more. Also used on new 48" Toro Titan models. Up to twice the cutting length for increased cutting efficiency. The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles.

  • Replaces Exmark OEM# 103-6396, 103-6396-S, 116-5177-S
  • Replaces Toro OEM# 109-6873
  • Length: 16-1/4"
  • Blade Width: 2.50"
  • Blade Thickness: .203"
  • Center hole: 15/16"
  • Requires: (3) for 48"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $15.95
Oregon 18" Gator G5 Blade 595-085 18" Gator G5 Mulching Blade

Part# 595-085
18" Oregon Gator G5 Mulching Blade used on Husqvarna EX5221, EZ5224, EZ5226, EZ5424, MZT52, MZ5225 and Dixon Ultra 52, Kodiak SE5223, Ram 52ZT, Ram Ultra 52 models. Also used on Yazoo Kees ZEKH5224, ZEKH52240, ZEKW52210, ZELKH5225 and Redmax CZT52 models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Dixon/Husqvarna/Yazoo OEM# 539112079521981501, 510417801
  • Blade Width: 3.00"
  • Blade Thickness: .164"
  • Center hole: 5 Point Star
  • Air Lift: 1"
  • Requires (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $15.95
21-3/32" Predator Mulching Blade B1PD5073 21-3/32" Predator Mulching Blade

Part# B1PD5073
21-3/32" Predator Mulching Blade used on 42" AYP Lawn Tractor (Stamped deck) models: Husqvarna, Craftsman, Poulan, Jonsered and McCulloch.

  • Replaces Husqvarna/AYP OEM# 586230101, 521981601, 532138498, 532422719, 532424752
  • Blade Width: 2.50"
  • Blade Thickness: .197"
  • Center hole: 5 Point Star
  • Requires: (2) for 42"
(Check our Models & OEM Cross-Reference #'s section to find your model#)

Our Price: $16.25
21-3/16" Oregon Gator G5 Mulching Blade 598-629 21-3/16" Gator G5 Mulching Blade

Part# 598-629
21-3/16" Oregon Gator G5 Mulching Blade used on most (1997 & after) 42" MTD Lawn Tractor (Stamped deck) models: Cub Cadet, Craftsman, Bolens, Troybilt and Yardman.

  • Replaces MTD OEM# 942-04308-X, 942-04312-X, 942-0616-X
  • Blade Width: 3.00"
  • Blade Thickness: .164"
  • Center hole: 6 Point Star
  • Air Lift: 1"
  • Requires: (2) for 42"

Our Price: $16.50
Oregon 17-1/2" Gator G3 Blade 96-382 17-1/2" Gator G3 Mulching Blade

Part# 96-382

Each Price (6 or More): $16.35

17-1/2" Oregon Gator G3 Mulching Blade used on 50" Toro TimeCutter Z5000 (74370 SN 270000001-280999999)(74391 S/N 270000001-290000225), TimeCutter Z5020 (74372 SN 270000001-270999999)(74399 SN 270000001-290999999), TimeCutter Z5030 (74373 (SN 290000001-290999999), TimeCutter Z5035 (74398 SN 310000001-310999999)(74376 SN 310000001-310999999), TimeCutter Z5040 (74374 SN 270000001-280999999), TimeCutter Z5060 (74375 SN 280000001-310999999). Superior mulching means fewer bag stops, cleaner side discharge, and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly.
  • Replaces Toro OEM# 110-6837-03, 112-9759, 112-9759-03
  • Width: 2.25"
  • Thickness: .187"
  • Center Hole: 5/8"
  • Offset: 7/16"
  • Requires: (3) for 50"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $17.35
93-601 Oregon 18" Gator G3 Mulching Blade 18" Gator G3 Mulching Blade

Part# 93-601
18" Oregon Gator G3 Mulching Blade
used on 36"/52" Bobcat XM Series mowers. Also used on 52" Wright Mfg Stander X and Sport X models. The Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade.

  • Replaces Bobcat OEM# 112111-02
  • Replaces Encore OEM# 823004
  • Replaces Wright Mfg OEM# 71440009
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Offset: 1/2"
  • Requires: (2) for 36" or (3) for 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $19.95
Sale Price: $17.50
You save $2.45!
594-601 Oregon 15-3/8" Gator G5 Blade 15-3/8" Gator G5 Mulching Blade

Part# 594-601
15-3/8" Oregon Gator G5 Mulching Blade used on 30" Exmark Commercial Walk-Behinds and Toro TimeMaster models. This blade is 3" wide compared to the original which is 2-1/4" wide. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.

  • Replaces Exmark OEM# 116-6358, 116-6358-03, 116-6358-S
  • Replaces Toro OEM# 116-6358-03, 116-6358-S, 120-9500-03
  • Blade Width: 3.00"
  • Blade Thickness: .134"
  • Center hole: 5/8"
  • Outer hole: 5/16"
  • Offset: 5/16"
  • Air Lift: 1"
  • Requires (2) per 30"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $20.25
Sale Price: $17.95
You save $2.30!
18-5/8" Oregon Gator G6 HD Mulching Blade 396-748 18-5/8" Gator G6 Mulching Blade

Part# 396-748
18-5/8" Oregon Gator G6 Heavy Duty Mulching Blade used on 54" Kubota RCK54-23ZG, RCK54GR, RCK54P-127Z, RCK54P-127Z, RCK54P-127A, RCK54P23BX models.Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Kubota OEM# K5617-34330, K5617-92340, K5617-92344
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 11/16"
  • Offset: 1/2"
  • Air Lift: 1"
  • Requires (3) per 54"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.50
320235 15" Oregon Gator G3 Mulching Blade: Grasshopper 96-343 15" Gator G3 Mulching Blade

Part# 96-343
15" Oregon Gator G3 Mulching Blade
for 44" Grasshopper Front Mount Deck models. Also used on Country Clipper 42" & 44" decks on Boss, Charger, JaZee, SR1025, SR375 and Trek Hydro mower models. Also used on Woods 44" decks on 1250, 1850, 1855, 2855, 5120, 5140, 5180, 5182, 5200, 5210, 5215, 5250, 6170, D14414T, D4414, D4414-3 mower models.

  • Replaces Country Clipper OEM# H-1665, H-1715, H-2013
  • Replaces Grasshopper OEM# 320231, 320233, 320234, 320235, 320320
  • Replaces Woods OEM# 70014, 70062KT, 7014KT, 72896KT
  • Length: 15"
  • Width: 2.50"
  • Thickness: .203"
  • Center hole: 1/2"
  • Offset: 5/16"
  • Requires: (3) for 44" cut
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $18.85
Oregon 17-7/8" Gator G3 Blade 96-318 17-7/8" Gator G3 Mulching Blade

Part# 96-318
17-7/8" Oregon Gator G3 Mulching Blade used on 36"/52" Raptor Series, Sport, Super S, Super Z and X-ONE models. Also used on 36"/52" BigDog Alpha, Alpha MP, Diablo, Hike, Trooper and X Series models. The G3 Gator blade is the best option for those looking for a replacement blade with better mulching capabilities.

  • Replaces Hustler/BigDog OEM# 782532, 794198, 785436
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 5/8"
  • Requires: (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $18.95
Oregon 20-11/16" Gator G3 Blade 96-620 20-11/16" Gator G3 Mulching Blade

Part# 96-620
20-11/16" Oregon Gator G3 Mulching Blade used on
21" Snapper Commercial Walk-behind (Steel deck)models.
Designed with progressive geometry on the cutting edge for a cleaner cut and an aggressive blade angle to increase air flow for superior bagging or side discharge, Gator G3 blades help you get that professional looking cut with any mower.

  • Replaces Snapper OEM# 1-7002, 1-7168, 1-9645, 1-9702, 1-9710, 1-9795, 2-6691, 7017168, 7019795, 7019795BZ, 7019795BZYP, 7026407, 7026407AYP,
    7041939BZ, 7041939BZYP
  • Blade Width: 2.75"
  • Blade Thickness: .164"
  • Center hole: 3/8"
  • Out hole: 3/8"
  • Offset: 3/16"
  • Air Lift: 3/4"
  • Require (1) for 21"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $19.25
18" Oregon Gator G6 HD Mulching Blade 396-322 18" Gator G6 Mulching Blade

Part# 396-322
18" Oregon Gator G6 Heavy Duty Mulching Blade used on 36" & 52" Exmark Metro, Pioneer, Turf Tracer, Lazer Z, Radius and more. Also used on New style Toro ZMaster models that use 15/16" center hole and require a splined blade bushing. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.

  • Replaces Exmark OEM# 103-6397, 116-5175
  • Replaces Toro OEM# 109-6873
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 15/16"
  • Air Lift: 1"
  • Requires (2) per 36" or (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $19.45
Oregon 18" Gator G3 Blade 96-329 18" Gator G3 Mulching Blade

Part# 96-329
18" Oregon Gator G3 Mulching Blade used on 52" Grasshopper Front Mount & M152 Mid Mount models. Also used on 52" Woods D5221T & D6121T Mow`n Machine models. Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade.

  • Replaces Grasshopper OEM# 320321
  • Replaces Woods OEM# 70104KT, 70117KT, 72505KT
  • Width: 2.50"
  • Thickness: .203"
  • Center Hole: 1/2"
  • Offset: 5/16"
  • Air Lift: 1"
  • Requires: (3) per 52"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $19.50
108-4081 Oregon's 14" G3 Gator Mulching Blade: Toro 96-374 14" Gator G3 Mulching Blade

Part# 96-374

Each Price (6 or More): $19.35

14" Oregon Gator G3 Mulching Blade used on Toro 40" Grandstand models with Turbo Force decks. Superior mulching means fewer bag stops, cleaner side discharge and better results. Our 26 quality standards ensure that you’re buying a sharp, high-performance blade that mounts properly. It delivers a clean cut for quality results. It’s not a replacement, it’s an upgrade.
  • Replaces Toro OEM# 108-4081, 108-4081-03, 108-4089-03, 108-4110-03, 108-4111-03, 108-4112-03, 114-4961, 114-4962, 114-4963, 114-4964, 114-4965
  • Length: 14"
  • Width: 2.50"
  • Thickness: .250"
  • Center Hole: 5/8"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $20.35
Oregon 27" Gator G3 Blade 96-741 27" Gator G3 Mulching Blade

Part# 96-741
27" Oregon Gator G3 Mulching Blade used on Toro Groundsmaster 3500-D, 3505-D, 4500-D and 4700-D models. Gator mulching blade provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle.

  • Replaces Toro OEM# 100-5754-03, 105-9810-03, 107-0235-03
  • Blade Width: 2.50"
  • Blade Thickness: .250"
  • Center hole: 1/2"
  • Offset: 1/2"
  • Air Lift: 1"
  • Requires (1) per 27"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $20.35
B1PD2015 Predator 24-1/2" HD Mulching Blade 24-1/2" Predator HD Mulching Blade

Part# B1PD2015
24-1/2" Predator Series HD Mulching Blade used on various 72" models. Such as Bad Boy, Ferris, Gravely, Hustler, Scag and more. Predator blades offer superior mulching capabilities over traditional mulching blades. The airflow tooth design increases blade strength while producing more airflow for smaller clippings. Predator blades have all the same benefits as XHT (Xtreme Hardness & Toughness) blades.

  • Replaces Bad Boy OEM# 038-7220-00
  • Replaces Exmark OEM# 103-1581, 103-1581-S
  • Replaces Ferris OEM# 5022476
  • Replaces Gravely OEM# 08781800
  • Replaces Hustler OEM# 603992, 603995, 608271, 607280
  • Replaces Jacobsen OEM# 3970261
  • Replaces Scag OEM# 481709
  • Replaces Spartan OEM# 438-0003-00
  • Replaces Toro OEM# 105-7784, 105-7784-03, 108-1120
  • Width: 2.50"
  • Thickness: .250"
  • Center hole: 5/8"
  • Requires (3) per 72"
(May NOT fit all models- Check product description for exact OEM Part # match)

Our Price: $20.95
596-627 Oregon 20-15/16" Gator G5 Mulching Blade 20-15/16" Gator G5 Mulching Blade

Part# 596-627
20-15/16" Oregon Gator G5 Mulching Blade used on 60" Land Pride models: AFM4014 All Flex Grooming Mower, AT2560 Air Tunnel Grooming Mower, AT2660 Air Tunnel Grooming Mower, FD2560 Flat Deck Grooming Mower, FDR1560 Rear Discharge Grooming Mower, FDR1660 Rear Discharge Grooming Mower, FDR2560 Rear Discharge Grooming Mower. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. It’s not a replacement blade, It’s an upgrade.

  • Replaces Land Pride OEM# 890-171C, 890-951C
  • Blade Width: 3.00"
  • Blade Thickness: .203"
  • Center hole: 1"
  • Offset: 3/4"
  • Air Lift: 1"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $21.05
Oregon 21-9/16" Gator G3 Blade 96-362 21-9/16" Gator G3 Mulching Blade

Part# 96-362
21-9/16" Oregon Gator G3 Mulching Blade used on 42" Toro Time Cutter models: 71255, 74324, 74325, 74327, 74330, 74350, 74360, 74363, 74365, 74366, 74380, 74381, 74386, 74389, 74390, 74403, 74420, 74425, 74616, 74622, 74623, 74625, 74626, 74627, 74628, 74633, 74636, 74640, 74642. Oregon blades are individually straightened and hardened to provide a consistent, cleaner cut and increase blade longevity.

  • Replaces Toro OEM# 110-1857-03, 110-6568-03, 117-5372-03, 137-1999-03, 106-2247-03
  • Center hole: 5/8"
  • Blade Width: 2.25"
  • Blade Thickness: .187"
  • Offset: 5/8"
  • Requires (2) per 42"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $21.50
25" Oregon G6 Gator Blade 396-743 25" G6 Gator Mulching Blade

Part# 396-743
25" Oregon G6 Gator Heavy Duty Mulching Blade used on 72" John Deere ZTrak Series, Compact Tractors and TerrainCut Front Mower models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. Up to twice the cutting length for increased cutting efficiency with each revolution.

  • Replaces John Deere OEM# M143749, TCU15882, M142514
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 7/8"
  • Offset: 1/2"
  • Air Lift: 1"
  • Requires (3) per 72"
(Check our Models & OEM Cross-Reference #'s section to find your model#)

Each Price $21.95
20-1/2" Oregon Gator G6 Blade 396-612 20-1/2" Gator G6 Mulching Blade

Part# 396-612

20-1/2" Oregon Gator G6 Heavy Duty Mulching Blade used on 60" Kubota RCK60B-22BX, RCK60B-24G, RCK60B-75B, RCK60B-23BX, RCK60D-26BX models. Tungsten carbide is fused into the blade, creating an ultra-hard layer at the cutting edge and increasing the time between sharpening. Cleaner, more efficient cutting performance can eliminate the need to bag, saving time, and reducing hassles. X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution. Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • Replaces Kubota OEM# K5371-34330, K5371-34340, K5371-99020, K5371-99040
  • Blade Width: 3.00"
  • Blade Thickness: .250"
  • Center hole: 7/8"
  • Offset: 5/8"
  • Air Lift: 1"
  • Requires (3) per 60"
(May NOT fit all models- Check product description for exact OEM Part # match)

Each Price $21.95